Description
Everest EBC65 Commercial Horizontal Bottle Cooler, Two Stainless Steel Lids, 21 cu. ft.
The Everest EBC65 is a commercial horizontal bottle cooler with 21 cu. ft. of storage under two locking stainless steel lids, holding up to 780 12 oz. cans or 528 12 oz. bottles. It measures 64 5/8 in. wide, 26 3/4 in. deep and 33 3/4 in. high, with a stainless steel countertop and rails over a black vinyl exterior. This bar bottle cooler suits bars and pubs, restaurants, hotel lounges and event venues.
Lids, Bottle Opener and Storage
Both lids have a heavy-duty stainless steel exterior, a galvanized steel interior, 3/4 in. of polyurethane insulation and a removable ratchet lock. A front-mounted bottle cap opener and cap catcher detach for cleaning. Inside, two epoxy-coated wire floor shelves keep air moving beneath the bottles, and four vertical wire bin dividers keep brands separated. Extra dividers are available. Shielded LED bar lighting with an on/off switch lights the bins with little added heat.
Blizzard R290 Refrigeration and Temperature Control
The side-mounted Blizzard R290 condensing unit is self-contained and fully detachable, so it can be replaced without on-site brazing. It runs on R290 refrigerant with zero ozone depletion potential and a global warming potential of 3. ECM fan motors and a full-length air duct move cold air through the cabinet, defrost runs automatically, and the self-maintaining condensate pan needs no drain. A digital controller with an LED display is factory set to 35°F, adjusts from 33°F to 54°F and sounds an alarm if the compressor or condenser coil overheats.
Cabinet Construction
The galvanized steel interior is open end to end, with no walls between compartments, and the cabinet is insulated with 1 3/4 in. of high-density polyurethane. Built-in caster thread receptacles accept optional 3 in. or 5 in. swivel casters or 3.5–6 in. height-adjustable legs.
Key Specs
- Capacity: 21 cu. ft.; 780 12 oz. cans or 528 12 oz. bottles
- Cabinet dimensions: 64 5/8 in. W x 26 3/4 in. D x 33 3/4 in. H
- Temperature range: 33°F to 54°F (factory set at 35°F)
- Electrical: 115V/60Hz/1-phase, 3.5 amps, 1/4+ HP, NEMA 5-15P plug
- Certifications: NSF, ETL Sanitation and cETLus
- Warranty: 3 years parts and labor, 5 years electrical, 10 years compressor
See the attached spec sheet for plan and airflow views and optional accessory part numbers.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.