Description
Everest EBD2-CT Club Top Direct Draw Keg Refrigerator, Two Solid Swing Doors, Two 1/2 Barrel Kegs, Black
The Everest EBD2-CT is a club top direct draw keg refrigerator that holds two 1/2 barrel kegs in 20 cu. ft., with two locking solid swing doors and a stainless steel club top lid. It measures 57 3/4 in. wide, 27 in. deep and 37 1/4 in. high, and two single-faucet 3 in. stainless steel draft arms pour straight from the kegs below. This kegerator suits bars and pubs, restaurants, brewery taprooms and event venues.
Draft System and Countertop
Both single-faucet draft arms are fully insulated, NSF certified and paired with matching air distributors. The countertop and rails are heavy-duty stainless steel, and an exterior T-shaped drain port carries moisture from the top tray; the drain hose isn't included, and a floor drain is required.
R290 Refrigeration and Temperature Control
The side-mounted R290 condensing unit uses refrigerant with zero ozone depletion potential and a global warming potential of 3. ECM fan motors speed cooling while using less energy, defrost runs automatically, and the condensate pan needs no external drain or heater. A digital controller with an LED display is factory set to 35°F, adjusts from 33°F to 54°F and sounds an alarm if the compressor or condenser coil overheats.
Cabinet, Doors and Shelving
The cabinet has a textured black vinyl exterior, galvanized steel interior walls, a stainless steel floor and 1 3/4 in. of polyurethane insulation, with no walls between compartments. The solid doors have recessed handles, and the stainless steel club top lid has a raised handle and 3/4 in. insulation. Snap-in magnetic gaskets and pre-installed locks come standard. One epoxy-coated wire shelf sits on height-adjustable stainless steel clips. Shatter-proof, silicone-coated LED lighting lights the interior. Built-in caster thread receptacles accept optional 3 in. or 5 in. swivel casters or 3.5–6 in. height-adjustable legs.
Key Specs
- Capacity: 20 cu. ft.; two 1/2 barrel kegs
- Cabinet dimensions: 57 3/4 in. W x 27 in. D x 37 1/4 in. H
- Temperature range: 33°F to 54°F (factory set at 35°F)
- Electrical: 115V/60Hz/1-phase, 4 amps, 1/4+ HP, NEMA 5-15P plug
- Certifications: NSF, ETL Sanitation and cETLus
- Warranty: 3 years parts and labor, 5 years electrical, 10 years compressor
See the attached spec sheet for plan and airflow views and optional accessory part numbers.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.