Description
Everest EBD4-24 Commercial Direct Draw Keg Refrigerator, Three Solid Swing Doors, Four 1/2 Barrel Kegs, Black
The Everest EBD4-24 is a commercial direct draw keg refrigerator that holds four 1/2 barrel kegs in 28 cu. ft. behind three locking solid swing doors. It measures 89 1/4 in. wide, 24 1/2 in. deep and 37 1/4 in. high, and two dual-faucet 3 in. stainless steel draft arms pour straight from the kegs below. The 24 1/2 in. depth helps where bar space is tight. This kegerator suits bars and pubs, restaurants, brewery taprooms and event venues.
Draft System and Countertop
Both dual-faucet draft arms are fully insulated, NSF certified and paired with matching air distributors, for four taps in total. The countertop and rails are heavy-duty stainless steel, and an exterior T-shaped drain port carries moisture from the top tray; the drain hose isn't included, and a floor drain is required.
Blizzard R290 Refrigeration and Temperature Control
The side-mounted Blizzard R290 condensing unit is self-contained and fully detachable, so it can be replaced without on-site brazing. It runs on R290 refrigerant with zero ozone depletion potential and a global warming potential of 3. ECM fan motors and a full-length air duct circulate cold air, defrost runs automatically, and the condensate pan needs no drain or heater. A digital controller with an LED display is factory set to 35°F, adjusts from 33°F to 54°F and sounds an alarm if the compressor or condenser coil overheats.
Cabinet and Doors
The cabinet has a textured black vinyl exterior, galvanized steel interior walls, a stainless steel floor and 1 3/4 in. of polyurethane insulation, with no walls between compartments. The black vinyl doors have recessed handles, snap-in magnetic gaskets and pre-installed locks. Shatter-proof, silicone-coated LED lighting lights the interior. Built-in caster thread receptacles accept optional 3 in. or 5 in. swivel casters or 3.5–6 in. height-adjustable legs.
Key Specs
- Capacity: 28 cu. ft.; four 1/2 barrel kegs
- Cabinet dimensions: 89 1/4 in. W x 24 1/2 in. D x 37 1/4 in. H
- Temperature range: 33°F to 54°F (factory set at 35°F)
- Electrical: 115V/60Hz/1-phase, 2.5 amps, 1/3 HP, NEMA 5-15P plug
- Certifications: NSF, ETL Sanitation and cETLus
- Warranty: 3 years parts and labor, 5 years electrical, 10 years compressor
See the attached spec sheet for plan and airflow views and optional accessory part numbers.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.