Description
Everest ECF1 Commercial Nitro Cold Brew Coffee Dispenser, One Solid Swing Door, 1/2 Barrel Keg Capacity
The Everest ECF1 is a commercial nitro cold brew coffee dispenser that holds one 1/2 barrel keg in 8 cu. ft. behind a locking solid swing door. It measures 23 1/2 in. wide, 32 in. deep and 39 3/8 in. high, and one 3 in. stainless steel draft arm pours cold brew straight from the keg below. This cold brew coffee kegerator suits coffee shops and cafes, restaurants, hotel breakfast service and offices.
Draft Arm and Nitro Setup
The single-faucet draft arm is fully insulated, NSF certified and paired with a matching air distributor. The owner's manual shows the standard single-faucet draft assembly fed by a nitrogen regulator, with an optional dual-faucet setup. Single and dual stout faucet coffee draft arms are listed as accessories.
Blizzard R290 Refrigeration and Temperature Control
The back-mounted Blizzard R290 condensing unit is self-contained and fully detachable, so it can be replaced without on-site brazing. It runs on R290 refrigerant with zero ozone depletion potential and a global warming potential of 3. ECM fan motors speed cooling while using less energy, defrost runs automatically, and the condensate pan needs no drain or heater. A digital controller with an LED display is factory set to 35°F, adjusts from 33°F to 54°F and sounds an alarm if the compressor or condenser coil overheats.
Cabinet and Doors
The cabinet has a textured black vinyl exterior, galvanized steel interior walls, a stainless steel floor and 1 3/4 in. of polyurethane insulation, with no walls between compartments. The tinted stainless steel door has a recessed handle, a snap-in magnetic gasket and a pre-installed lock. Shatter-proof, silicone-coated LED lighting lights the interior. Four 5 in. swivel casters come pre-installed, with locks on the front set.
Key Specs
- Capacity: 8 cu. ft.; one 1/2 barrel keg
- Cabinet dimensions: 23 1/2 in. W x 32 in. D x 39 3/8 in. H
- Temperature range: 33°F to 54°F (factory set at 35°F)
- Electrical: 115V/60Hz/1-phase, 2.5 amps, 1/5 HP, NEMA 5-15P plug
- Certifications: NSF, ETL Sanitation and cETLus
- Warranty: 3 years parts and labor, 5 years electrical, 10 years compressor
See the attached spec sheet, owner's manual, keg capacity sheet and overshelf specs for dimensions, setup and accessory part numbers.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.