Description
The Traulsen ADT232NUT-HHS is a two-section, self-contained reach-in refrigerator/freezer designed to keep refrigerated and frozen inventory in separate side-by-side compartments. The refrigerator is on the left and the freezer is on the right, allowing staff to organize ingredients by holding requirement without moving between separate cabinets.
This A-Series N-Width configuration has four half-height solid doors, two per section, for access to a smaller portion of the cabinet at a time. It includes six factory-installed coated wire shelves, LED interior lighting, door locks, and a top-mounted dual refrigeration system.
Applications and Workflow
Suitable for restaurant prep areas, institutional kitchens, bakeries, and other commercial operations that need refrigerator and freezer storage in one reach-in footprint. This model is intended for indoor commercial storage and provides separate refrigerated and frozen sections; it is not a single-temperature refrigerator or freezer.
Features and Practical Benefits
Separate refrigerator and freezer sections
The left compartment is refrigerated and the right compartment is frozen, with balanced self-contained refrigeration systems for the two storage zones.
Half-door access
Four half-height solid doors help limit the open portion of the cabinet during routine retrieval while providing separate upper and lower access to each section.
Usable shelf storage
Three adjustable coated wire shelves are supplied per section, for six standard shelves total. Shelves are mounted on shelf pins for organization flexibility.
Built for daily kitchen workflow
Self-closing doors stay open at 120 degrees when needed for loading, and the horizontal recessed handles help reduce door-face projection into the aisle.
Integrated controls and lighting
The Smart Control includes an LED display, while door-activated LED lights illuminate the interior when a door is opened.
Technical Specifications
| Manufacturer model | ADT232NUT-HHS |
|---|---|
| Cabinet configuration | Two-section dual-temperature reach-in refrigerator/freezer |
| Door configuration | Four half-height solid doors |
| Compartment layout | Refrigerator left; freezer right |
| Refrigeration system | Top-mounted, self-contained dual system |
| Overall width | 52-1/8 in. |
| Overall depth | 35-1/8 in. |
| Overall height on legs | 83-7/16 in. |
| Depth with door open 90 degrees | 56-11/16 in. |
| Total net capacity | 42.26 cu. ft. |
| Refrigerator net capacity | 21.13 cu. ft. |
| Freezer net capacity | 21.13 cu. ft. |
| Standard shelves | 6 adjustable coated wire shelves |
| Electrical requirement | 115V, 60Hz, 1-phase |
| Plug type | NEMA 5-20P |
| Full-load amperage | 15.4 A |
| Refrigerator refrigerant | R-450A |
| Freezer refrigerant | R-448A |
| Refrigerator compressor | 1/3 HP |
| Freezer compressor | 1/2 HP |
| Included legs | Four 6 in. adjustable stainless steel legs |
| Exterior and interior finish | Stainless steel exterior; anodized aluminum interior |
| Power cord | 9 ft. cord and plug |
Installation and Purchasing Considerations
- Plan for an overall footprint of 52-1/8 in. W x 35-1/8 in. D x 83-7/16 in. H on the included 6 in. adjustable legs.
- Allow for a 56-11/16 in. depth when a door is open 90 degrees. Confirm this door swing will not obstruct aisles, adjacent equipment, or work stations.
- Provide a 115V, 60 Hz, single-phase electrical connection with a NEMA 5-20P receptacle. The unit is supplied with a 9 ft. cord and plug.
- This is a top-mounted, self-contained unit. Traulsen notes that 12 in. top clearance is preferred for performance and service access.
- Install on a stable, level floor and retain access to the top louver/condenser area for cleaning and service.
Choosing This Configuration
ADT232NUT-HHS is the half-height solid-door version of this 52-1/8 in. A-Series dual-temperature cabinet. It has four half doors, rather than the two full-height doors used on the FHS configuration.
The standard arrangement places the refrigerator on the left and freezer on the right. A relocated freezer compartment is listed as an option, so confirm the cabinet arrangement before ordering if a nonstandard layout is required.
Standard support is four 6 in. adjustable stainless steel legs. Casters and other support arrangements are options rather than standard equipment.
Standard storage is coated wire shelving. Tray slides and additional or stainless steel shelves are optional interior arrangements.
Frequently Asked Questions
Which side is the refrigerator and which side is the freezer?
The refrigerator compartment is on the left and the freezer compartment is on the right in the standard configuration.
How many shelves are included?
Six adjustable coated wire shelves are standard: three shelves in the refrigerator section and three in the freezer section.
What electrical connection does this model require?
The standard unit operates on 115V/60Hz/1-phase power and is equipped with a NEMA 5-20P plug on a 9 ft. cord.
How much clearance is needed for the doors?
At a 90-degree door opening, plan for a total depth of 56-11/16 in. Traulsen also prefers 12 in. of clearance above the cabinet for performance and service access.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.