Nemco 55800 Easy Tuna Press, Sink-Mount Can Strainer for One 64 oz. Foodservice Can, NSF
Description
A sink-side press that squeezes the extra water out of a 64-ounce can of tuna in under 3 minutes.
The Nemco 55800 Easy Tuna Press removes excess water from canned tuna so sandwiches and salads stay fresher, without soggy bread or lettuce. Hang it on the side of a food prep sink, invert the opened can with its lid in place onto the base, and turn the crank until snug. The press face fits a standard 64 oz. foodservice can and spreads the force evenly for uniform water removal.
Will it fit
- Size
- 6" W x 12" D x 22" H; 9 lb.
- Mounting
- Hangs on the side of most food preparation sinks; lifts off for cleaning or storage
- Can size
- One 64 oz. foodservice can
- Power
- Manual; no power needed
Fits a 64 oz. can
The press face matches the surface of a standard 64 oz. foodservice tuna can and presses evenly for uniform water removal.
Under 3 minutes
Nemco says it drains the water from a 64 oz. can in less than 3 minutes with a few turns of the crank.
Drill-press action
The stainless steel handle takes little effort and multiplies it into heavy pressure on the tuna.
Hangs on the sink
It hangs on the side of the sink so the water drains away. Suction cups steady it in use and it lifts off easily afterward.
Cast aluminum body
A cast aluminum body and stainless steel parts stand up to daily commercial use.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Check that your prep sink edge can take the hanging bracket before first use.
Questions buyers ask
How does it work?
Hang the press on the side of the sink, open the can and pour off the water, keep the lid in place and turn the can face down on the press base, then turn the crank until snug.
What can size does it take?
One standard 64 oz. foodservice can at a time.
Will it fit my sink?
Nemco says it is designed to attach to most food preparation sinks. It is 6" W x 12" D x 22" H.
What parts can be replaced?
Nemco lists a drive shoe set, part 55572, and suction cups, part 45472, sold each.
What warranty does it have?
Nemco gives its food preparation products a limited lifetime warranty on structural and mechanical parts for the original user, parts only. Blades are not covered, and bushings and bearings are covered for 2 years.
Specs
| Manufacturer | Nemco |
|---|---|
| Model Number | 55800 |
| Type | Sink-Mount Tuna Press and Can Strainer |
| Unit Weight | 9 lb. |
| Shipping Weight | 12 lb. |
| Width | 6 Inches |
| Depth | 12 Inches |
| Height | 22 Inches |
| Shipping Carton | 13-1/2" x 7" x 21" |
| Capacity | One 64 oz. Foodservice Can |
| Drain Time | Under 3 Minutes per Can |
| Material | Cast Aluminum BodyStainless Steel HandleSuction Cups |
| Power Type | Manual |
| Replacement Parts | Drive Shoe Set 55572Suction Cup 45472, Each |
| Certifications | NSF |
| Warranty | Limited Lifetime, Parts Only |
| Warranty Terms | Covers structural and mechanical parts for the original userBlades Not CoveredBushings and Bearings 2 Years |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say





