Description
2 non-clog open burners over a stainless steel cabinet base, 12" wide.
The Southbend Platinum P12C-B is a 12" heavy-duty sectional range for restaurants, hotels and institutional kitchens that build a custom cooking line. The top has 2 non-clog open burners. Below is a stainless steel cabinet base for storage. Natural-gas input totals 70,000 BTU. It connects with a 1" rear gas connection or couples to neighboring sections through its 1-1/4" front manifold, and needs an external pressure regulator.
Will it fit · Will it hook up
- Outside size
- 12" W × 37.5" D × 41" H, including the 5" flue riser; 36" cooking height on 6" legs
- Crate size
- 20" W × 42.5" D × 45" H, 200 lbs
- Gas
- 1" male NPT rear connection plus a 1-1/4" front manifold for coupling to other sections; minimum 7" W.C. natural gas or 11" W.C. propane
- Regulator
- Needs a regulated gas supply; the external pressure regulator is ordered separately
- Heat input
- 70,000 BTU natural gas (2 × 35,000) or propane
- Electrical
- None listed
- Clearances
- 10" sides and 6" rear from combustible construction, 0" from noncombustible; vented hood recommended
Dimensions are from Southbend's spec sheet (Form P12-B Rev 14, October 2025) and the 2026 Southbend price book. Measure every doorway and turn on the delivery path before ordering; the flue riser is 5" high and taller risers with shelves are optional.
2 non-clog burners
Patented clog-free open burners rated 35,000 BTU each on natural gas or propane, under removable welded steel top grates, with a removable drip tray.
Cabinet base
A stainless steel cabinet base with a removable door that hinges on the right or left for storage under the cooking top, on 6" adjustable stainless steel legs.
Built for a battery
A 1-1/4" front gas manifold couples to neighboring Platinum sections, and the unit can sit anywhere in a line-up; an end unit gets a solid side. Stainless steel front, sides, rear and exterior bottom.
Delivery and setup
- Ships by freight carrier. See our shipping policy for delivery details, and call us for the current lead time.
- Ships in a 20" x 42.5" x 45" crate, 200 lbs.
- Tell us natural gas or propane when you order; the gas type is set at the factory.
- Order the external pressure regulator with the range unless your gas line already has one sized for it; ask us if you are unsure.
- Inspect the shipment before signing for it and note any damage on the bill. Report concealed damage to the carrier within 15 days.
- Have a qualified gas installer connect the range, set the regulator and follow local codes.
Questions buyers ask
Does it have an oven?
No. The C in the model number means a stainless steel cabinet base for storage. At this width Southbend offers the top on a cabinet base or as a modular unit.
Natural gas or propane?
Southbend sets the range for one gas at the factory, so tell us your gas type when ordering. Natural gas: 70,000 BTU in total; propane: 70,000 BTU.
Do I need a pressure regulator?
Yes. All Platinum sectional units need a regulated gas supply, and Southbend's spec sheet says the pressure regulator must be ordered separately. Ask us to add it to your order.
What gas hookup does it need?
A 1" rear gas connection with a male NPT connector, or the 1-1/4" front manifold when it is coupled to other sections. Minimum supply pressure is 7" W.C. for natural gas and 11" W.C. for propane.
Does it need electricity?
No electrical service is listed for the P12C-B.
How close can it go to a wall?
10" sides and 6" rear from combustible construction, 0" from noncombustible. Southbend recommends installing it under a vented hood.
What is the step-up version?
The P12C-B-SU raises the rear burners 4" above the front burners. The P12C-B has all burners at the same height.
Can I use large stock pots?
Southbend asks that cookware 12" or wider stay on the rear burners and never hang over the front rail, which can trap heat and damage the components there.
Specs
| Manufacturer | Southbend |
|---|---|
| Model Number | P12C-B |
| Series | Platinum Heavy-Duty Sectional Range, 12" |
| Quantity | 1 Each |
| Shipping Weight | 200 lbs (Crated) |
| Width | 12 Inches |
| Depth | 37.5 Inches |
| Height | 41 Inches (with 5" Flue Riser) |
| Cooking Height | 36 Inches |
| Crate Size | 20" W x 42.5" D x 45" H |
| Cabinet Base | Stainless Steel Cabinet with A removable door that hinges on the right or left |
| Legs | 6" Stainless Steel Adjustable Legs (Casters Optional) |
| Top Configuration | 2 Non-Clog Burners |
| Open Burners | 2 Patented Clog-Free Burners, 35,000 BTU/H Each (Natural Gas or Propane) |
| Grates | Removable Welded Steel Top GratesCast Iron Grates Optional |
| Total BTU (Natural Gas) | 70,000 BTU/H (2 x 35,000) |
| Total BTU (Propane) | 70,000 BTU/H (2 x 35,000) |
| Gas Type | Natural Gas or Propane (Set at the Factory; Specify When Ordering) |
| Gas Connection | 1" Male NPT at Rear1-1/4" Front Gas Manifold (Couples to Adjacent Sections) |
| Minimum Supply Pressure | 7" W.C. Natural Gas11" W.C. Propane |
| Pressure Regulator | External Regulator Required (Ordered Separately) |
| Electrical | None Listed for This Model |
| Front Rail | 9.25" Deep |
| Flue Riser | 5" High Stainless Steel (24" or 36" Optional) |
| Exterior | Stainless Steel Front, Sides, Rear and Exterior BottomFront and Sides #3 Polished 430 and 304 Stainless Steel |
| Construction | Fully Insulated Lining and Burner Box |
| Clearances | 10" Sides and 6" Rear from Combustible Construction0" from Noncombustible Construction |
| Ventilation | Installation Under a Vented Hood Recommended |
| Certifications | CSA Design Certified (C/US)NSFMade in USA |
| Warranty | 1 Year Parts and Labor (Southbend Limited Warranty) |
| Usage | Commercial Use Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.