Southbend P12N-G Platinum 12" Modular Gas Sectional Range, 12" Manual Griddle, Countertop Mount, 32,000 BTU

SouthbendSKU: SBE-P12N-G

Price:
Regular price$5,065.00

Quick Shipping

Usually ships in 2–5 business days

Product Overview

  • 12" manual griddle, 1" thick plate, 32,000 BTU natural gas
  • Modular unit for a countertop, refrigerated or freezer base; no oven or legs
  • 32,000 BTU total on natural gas, 28,000 BTU on propane
  • 12" W x 37.5" D x 13.5" H with 5" flue riser; 1" rear gas connection, external regulator required
  • CSA design certified and NSF, made in USA; 1-year parts and labor warranty

Resources & Documents

Specs

Manufacturer Southbend
Model Number P12N-G
Series Platinum Heavy-Duty Sectional Range, 12"
Quantity 1 Each
Shipping Weight 175 lbs (Crated)
Width 12 Inches
Depth 37.5 Inches
Height 13.5 Inches (with 5" Flue Riser)
Crate Size 20" W x 42.5" D x 21" H
Mounting Modular (Countertop, Refrigerated or Freezer Base)No Legs or Oven
Top Configuration 12" Manual Griddle
Griddle 12" Wide, 1" Thick Plate with Side and Rear Splashers2 x 16,000 BTU/H Natural Gas (14,000 Propane)1 Control Knob
Griddle Control Manual (No Specific Temperature Setting)
Grease Drawer Removable Stainless Steel
Ignition Electronic Pilot Ignition - Piezo
Total BTU (Natural Gas) 32,000 BTU/H (2 x 16,000)
Total BTU (Propane) 28,000 BTU/H (2 x 14,000)
Gas Type Natural Gas or Propane (Set at the Factory; Specify When Ordering)
Gas Connection 1" Male NPT at Rear1-1/4" Front Gas Manifold (Couples to Adjacent Sections)
Minimum Supply Pressure 7" W.C. Natural Gas11" W.C. Propane
Pressure Regulator External Regulator Required (Ordered Separately)
Electrical None Listed for This Model
Front Rail 9.25" Deep
Flue Riser 5" High Stainless Steel (24" or 36" Optional)
Exterior Stainless Steel Front, Sides, Rear and Exterior BottomFront and Sides #3 Polished 430 and 304 Stainless Steel
Construction Fully Insulated Lining and Burner Box
Clearances 10" Sides and 12" Rear from Combustible Construction0" from Noncombustible Construction
Ventilation Installation Under a Vented Hood Recommended
Certifications CSA Design Certified (C/US)NSFMade in USA
Warranty 1 Year Parts and Labor (Southbend Limited Warranty)
Usage Commercial Use Only

Certifications

CSA Design Certified (C/US) | NSF | Made in USA

Description

A 12" manual griddle in a modular section that mounts on a counter, refrigerated base or battery line, 12" wide.

Southbend P12N-G Platinum 12 inch gas sectional range with 12 inch manual griddle, modular countertop unit, line drawing

The Southbend Platinum P12N-G is a 12" heavy-duty sectional range for restaurants, hotels and institutional kitchens that build a custom cooking line. The top has a 12" manual griddle. It has no base of its own: the N means a modular unit for mounting on a countertop, refrigerated or freezer base. Natural-gas input totals 32,000 BTU. It connects with a 1" rear gas connection or couples to neighboring sections through its 1-1/4" front manifold, and needs an external pressure regulator.

Will it fit · Will it hook up

Outside size
12" W × 37.5" D × 13.5" H, including the 5" flue riser
Crate size
20" W × 42.5" D × 21" H, 175 lbs
Gas
1" male NPT rear connection plus a 1-1/4" front manifold for coupling to other sections; minimum 7" W.C. natural gas or 11" W.C. propane
Regulator
Needs a regulated gas supply; the external pressure regulator is ordered separately
Heat input
32,000 BTU natural gas (2 × 16,000); 28,000 BTU propane
Electrical
None listed
Clearances
10" sides and 12" rear from combustible construction, 0" from noncombustible; vented hood recommended

Dimensions are from Southbend's spec sheet (Form P12-G Rev 11, October 2021) and the 2026 Southbend price book. The section mounts on a counter, refrigerated or freezer base you supply or order separately; check that base's top size and load rating before ordering.

12" manual griddle

A 1" thick griddle plate with side and rear splashers and a removable stainless steel grease drawer, 2 burners at 16,000 BTU each (14,000 BTU propane), manual controls (no set temperature).

Modular mounting

Built to sit on a countertop, refrigerated or freezer base.

Built for a battery

A 1-1/4" front gas manifold couples to neighboring Platinum sections, and the unit can sit anywhere in a line-up; an end unit gets a solid side. Stainless steel front, sides, rear and exterior bottom.

Delivery and setup

  • Ships by freight carrier. See our shipping policy for delivery details, and call us for the current lead time.
  • Ships in a 20" x 42.5" x 21" crate, 175 lbs.
  • Tell us natural gas or propane when you order; the gas type is set at the factory.
  • Order the external pressure regulator with the range unless your gas line already has one sized for it; ask us if you are unsure.
  • Inspect the shipment before signing for it and note any damage on the bill. Report concealed damage to the carrier within 15 days.
  • Have a qualified gas installer mount and connect the range, set the regulator and follow local codes.

Questions buyers ask

Does it come with legs or an oven?

No. The P12N-G is the modular version with no base. It mounts on a countertop, refrigerated or freezer base. The same top on a cabinet base is a different model.

Natural gas or propane?

Southbend sets the range for one gas at the factory, so tell us your gas type when ordering. Natural gas: 32,000 BTU in total; propane: 28,000 BTU.

Do I need a pressure regulator?

Yes. All Platinum sectional units need a regulated gas supply, and Southbend's spec sheet says the pressure regulator must be ordered separately. Ask us to add it to your order.

What gas hookup does it need?

A 1" rear gas connection with a male NPT connector, or the 1-1/4" front manifold when it is coupled to other sections. Minimum supply pressure is 7" W.C. for natural gas and 11" W.C. for propane.

Does it need electricity?

No electrical service is listed for the P12N-G.

How close can it go to a wall?

10" sides and 12" rear from combustible construction, 0" from noncombustible. Southbend recommends installing it under a vented hood.

Manual or thermostatic griddle?

A G in the model number means manual controls that set the flame, not a temperature. A T means thermostatic control from 180°F to 400°F. This model has manual controls.

What does the warranty cover?

Southbend covers defects in parts and labor for 1 year from purchase, serviced by a Southbend Authorized Service Agency, and no longer than 18 months from the factory. Spark igniters, seals and similar wear parts are limited to 90 days, and damage from improper installation, ventilation or misuse is not covered.

CSA and NSFCSA certified for the US and Canada, NSF listed.
Made in USABuilt by Southbend in North Carolina.
32,000 BTUNatural gas rating.
1-Year WarrantyParts and labor, by Southbend Authorized Service.

Specs

Manufacturer Southbend
Model Number P12N-G
Series Platinum Heavy-Duty Sectional Range, 12"
Quantity 1 Each
Shipping Weight 175 lbs (Crated)
Width 12 Inches
Depth 37.5 Inches
Height 13.5 Inches (with 5" Flue Riser)
Crate Size 20" W x 42.5" D x 21" H
Mounting Modular (Countertop, Refrigerated or Freezer Base)No Legs or Oven
Top Configuration 12" Manual Griddle
Griddle 12" Wide, 1" Thick Plate with Side and Rear Splashers2 x 16,000 BTU/H Natural Gas (14,000 Propane)1 Control Knob
Griddle Control Manual (No Specific Temperature Setting)
Grease Drawer Removable Stainless Steel
Ignition Electronic Pilot Ignition - Piezo
Total BTU (Natural Gas) 32,000 BTU/H (2 x 16,000)
Total BTU (Propane) 28,000 BTU/H (2 x 14,000)
Gas Type Natural Gas or Propane (Set at the Factory; Specify When Ordering)
Gas Connection 1" Male NPT at Rear1-1/4" Front Gas Manifold (Couples to Adjacent Sections)
Minimum Supply Pressure 7" W.C. Natural Gas11" W.C. Propane
Pressure Regulator External Regulator Required (Ordered Separately)
Electrical None Listed for This Model
Front Rail 9.25" Deep
Flue Riser 5" High Stainless Steel (24" or 36" Optional)
Exterior Stainless Steel Front, Sides, Rear and Exterior BottomFront and Sides #3 Polished 430 and 304 Stainless Steel
Construction Fully Insulated Lining and Burner Box
Clearances 10" Sides and 12" Rear from Combustible Construction0" from Noncombustible Construction
Ventilation Installation Under a Vented Hood Recommended
Certifications CSA Design Certified (C/US)NSFMade in USA
Warranty 1 Year Parts and Labor (Southbend Limited Warranty)
Usage Commercial Use Only

Certifications

CSA Design Certified (C/US) | NSF | Made in USA

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Google Reviews

Related Products

Recently viewed