Description
A 48" thermostatic griddle over a 45,000 BTU standard oven, 48" wide.
The Southbend Platinum P48D-TTTT is a 48" heavy-duty sectional range for restaurants, hotels and institutional kitchens that build a custom cooking line. The top has a 48" thermostatic griddle. Below is a 45,000 BTU standard oven that takes sheet pans either way. Natural-gas input totals 173,000 BTU. It connects with a 1" rear gas connection or couples to neighboring sections through its 1-1/4" front manifold, and needs an external pressure regulator.
Will it fit · Will it hook up
- Outside size
- 48" W × 37.5" D × 41" H, including the 5" flue riser; 36" cooking height on 6" legs
- Crate size
- 55" W × 55" D × 45" H, 800 lbs
- Gas
- 1" male NPT rear connection plus a 1-1/4" front manifold for coupling to other sections; minimum 7" W.C. natural gas or 11" W.C. propane
- Regulator
- Needs a regulated gas supply; the external pressure regulator is ordered separately
- Heat input
- 173,000 BTU natural gas (8 × 16,000 + 45,000 oven); 157,000 BTU propane
- Electrical
- None for the standard standing-pilot oven
- Clearances
- 10" sides and 12" rear from combustible construction, 0" from noncombustible; vented hood recommended
Dimensions are from Southbend's spec sheet (Form P48-GGGG Rev 11, October 2021) and the 2026 Southbend price book. Measure every doorway and turn on the delivery path before ordering; the flue riser is 5" high and taller risers with shelves are optional.
48" thermostatic griddle
A 1" thick griddle plate with side and rear splashers and a removable stainless steel grease drawer, 8 burners at 16,000 BTU each (14,000 BTU propane), thermostatic control from 180°F to 400°F.
Standard oven
A 45,000 BTU oven with standing pilot and an "Insta-On" thermostat from 175°F to 550°F. The porcelain enamel interior is 26" wide and 26-1/2" deep, so sheet pans fit either way; 2 racks. The oven sits on the left with a 12" cabinet on the right.
Built for a battery
A 1-1/4" front gas manifold couples to neighboring Platinum sections, and the unit can sit anywhere in a line-up; an end unit gets a solid side. Stainless steel front, sides, rear and exterior bottom.
Delivery and setup
- Ships by freight carrier. See our shipping policy for delivery details, and call us for the current lead time.
- Ships in a 55" x 55" x 45" crate, 800 lbs.
- Tell us natural gas or propane when you order; the gas type is set at the factory.
- Order the external pressure regulator with the range unless your gas line already has one sized for it; ask us if you are unsure.
- Inspect the shipment before signing for it and note any damage on the bill. Report concealed damage to the carrier within 15 days.
- Have a qualified gas installer connect the range, set the regulator and follow local codes.
Questions buyers ask
Will sheet pans fit in the oven?
Yes. The standard oven interior is 26" wide, 26-1/2" deep and 14" high, so full-size sheet pans fit either way. It comes with 2 racks and has five rack positions.
Natural gas or propane?
Southbend sets the range for one gas at the factory, so tell us your gas type when ordering. Natural gas: 173,000 BTU in total; propane: 157,000 BTU.
Do I need a pressure regulator?
Yes. All Platinum sectional units need a regulated gas supply, and Southbend's spec sheet says the pressure regulator must be ordered separately. Ask us to add it to your order.
What gas hookup does it need?
A 1" rear gas connection with a male NPT connector, or the 1-1/4" front manifold when it is coupled to other sections. Minimum supply pressure is 7" W.C. for natural gas and 11" W.C. for propane.
Does it need electricity?
Not with the standard standing-pilot oven. Southbend lists 120V or 208/240V single-phase power only for ovens ordered with optional electronic ignition.
How close can it go to a wall?
10" sides and 12" rear from combustible construction, 0" from noncombustible. Southbend recommends installing it under a vented hood.
Manual or thermostatic griddle?
A G in the model number means manual controls that set the flame, not a temperature. A T means thermostatic control from 180°F to 400°F. This model has thermostatic control.
What does the warranty cover?
Southbend covers defects in parts and labor for 1 year from purchase, serviced by a Southbend Authorized Service Agency, and no longer than 18 months from the factory. Spark igniters, seals and similar wear parts are limited to 90 days, and damage from improper installation, ventilation or misuse is not covered.
Specs
| Manufacturer | Southbend |
|---|---|
| Model Number | P48D-TTTT |
| Series | Platinum Heavy-Duty Sectional Range, 48" |
| Quantity | 1 Each |
| Shipping Weight | 800 lbs (Crated) |
| Width | 48 Inches |
| Depth | 37.5 Inches |
| Height | 41 Inches (with 5" Flue Riser) |
| Cooking Height | 36 Inches |
| Crate Size | 55" W x 55" D x 45" H |
| Standard Oven | 45,000 BTU/H (Natural Gas or Propane), Standing Pilot175 - 550 Degrees FInterior 26" W x 26.5" D x 14" H, Porcelain Enamel2 Racks, 5-Position Rack Guides |
| Legs | 6" Stainless Steel Adjustable Legs (Casters Optional) |
| Top Configuration | 48" Thermostatic Griddle |
| Griddle | 48" Wide, 1" Thick Plate with Side and Rear Splashers8 x 16,000 BTU/H Natural Gas (14,000 Propane)3 Control Knobs |
| Griddle Control | Thermostatic, 180 - 400 Degrees F |
| Grease Drawer | Removable Stainless Steel |
| Ignition | Battery Spark Ignition |
| Total BTU (Natural Gas) | 173,000 BTU/H (8 x 16,000 + 45,000 oven) |
| Total BTU (Propane) | 157,000 BTU/H (8 x 14,000 + 45,000 oven) |
| Gas Type | Natural Gas or Propane (Set at the Factory; Specify When Ordering) |
| Gas Connection | 1" Male NPT at Rear1-1/4" Front Gas Manifold (Couples to Adjacent Sections) |
| Minimum Supply Pressure | 7" W.C. Natural Gas11" W.C. Propane |
| Pressure Regulator | External Regulator Required (Ordered Separately) |
| Electrical | None Required for the Standing-Pilot Oven (Optional Electronic Ignition Needs 120V or 208/240V Single-Phase Power) |
| Front Rail | 9.25" Deep |
| Flue Riser | 5" High Stainless Steel (24" or 36" Optional) |
| Exterior | Stainless Steel Front, Sides, Rear and Exterior BottomFront and Sides #3 Polished 430 and 304 Stainless Steel |
| Construction | Fully Insulated Lining and Burner Box |
| Clearances | 10" Sides and 12" Rear from Combustible Construction0" from Noncombustible Construction |
| Ventilation | Installation Under a Vented Hood Recommended |
| Certifications | CSA Design Certified (C/US)NSFMade in USA |
| Warranty | 1 Year Parts and Labor (Southbend Limited Warranty) |
| Usage | Commercial Use Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.