Edlund 395/115V Electric Knife Sharpener, Precision Knife Guides, 115V, Case of 3
Description
A countertop electric sharpener that keeps every knife in the kitchen sharp between professional services.
The Edlund 395/115V is the Model 395 electric knife sharpener for 115V power. It gives results similar to a professional sharpening service, as often as you need them. A 3" by 1" grinding wheel on an 1800 RPM motor works through a precise guidance system, and the knife slot is just 3/16" wide for safety. This listing is a case of 3 sharpeners.
Will it fit · Will it hook up
- Outside size
- 9-3/4" W x 4" D x 4-3/4" H; 8.9 lb. each
- Power
- 115V, 0.3 A, 50-60 Hz; grounded outlet matching the base label
- Pack
- Case of 3 sharpeners; 31 lb. case
Precise guidance
Built-in ABS plastic knife guides hold the angle for consistent results and wipe clean easily.
Knives to cleavers
Sharpens practically any knife, from 3/16" knives to cleaver blades.
No magnets
There are no magnets that could magnetize the blade and leave metal shavings on food.
Safer slot
The knife slot is reduced to 3/16" wide, and the guides let the heel reach closer to the stone.
Overload reset
An overload switch stops the motor if too much pressure is applied to the knife.
Stainless case
Stainless steel case with a lighted rocker switch that shows when the motor runs.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- This listing is a case of 3 sharpeners in one 31 lb. master case.
- Each unit plugs into a grounded 115V outlet; check the voltage on the label under the base before you plug it in.
Questions buyers ask
How many sharpeners come with this listing?
This listing is a case of 3 sharpeners. Edlund packs the Model 395 3 to a master case that weighs 31 lb.
What power does it need?
Plug it into a grounded outlet with the same voltage as the label on the bottom of the base: 115V, 0.3 A, 50-60 Hz.
How do I sharpen a knife?
Pull the knife through the left slot with the heel near the front, keeping light, steady pressure, then pull it through the right slot. Repeat until you get the edge you want. Hold the knife firmly.
How do I clean it?
Unplug it, gently shake the grinding dust out of the inside into a waste bin, then wipe the outside and the knife guide with a damp cloth.
When does the stone need replacing?
Edlund says the stone lasts up to several years in normal use. Replace it when the knife no longer touches the wheel while it rests against the knife guide. Order grinding wheel assembly A526SSP.
What warranty does it have?
Edlund warrants it against defects in material and workmanship for one year from the date of purchase. The purchaser returns the unit to the factory, freight prepaid.
Specs
| Manufacturer | Edlund |
|---|---|
| Model Number | 395/115V |
| Series | 395 Electric Knife Sharpener |
| Product Code | 39600 |
| Quantity | Case of 3 |
| Unit Weight | 8.9 lb. Each |
| Case Weight | 31 lb.1.1 cu. ft. |
| Width | 9.75 Inches |
| Depth | 4 Inches |
| Height | 4.75 Inches |
| Voltage | 115 Volts |
| Hertz | 50-60 Hz |
| Amps | 0.3 Amps |
| Switch | Lighted Rocker Switch |
| Motor Speed | 1800 RPM |
| Grinding Wheel | 3" Diameter x 1" Wide |
| Knife Range | 3/16" Knives to Cleaver Blades |
| Housing | Stainless Steel Case |
| Knife Guide | ABS Plastic Knife Guides3/16" Knife Slot |
| Replacement Grinding Wheel | A526SSP |
| Certifications | cULus Listed, CE |
| Warranty | 1 Year from Date of Purchase |
| Warranty Terms | Parts Found Defective under Normal Use Repaired or ReplacedPurchaser Returns the Unit to the Factory, Freight Prepaid |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say






