Edlund 401/115V NSF Electric Knife Sharpener, Pop-Out Knife Guide, 115V, Case of 3
Description
An NSF certified countertop sharpener that restores a factory-fresh edge from heel to tip, every shift.
The Edlund 401/115V is the Model 401 electric knife sharpener for 115V power. Edlund designed it with input from engineers at a leading cutlery maker to restore the whole edge, tip to handle. A 3" by 1" grinding wheel on an 1800 RPM motor does the work, and the blue ABS knife guide pops out for cleaning or for changing the wheel. This listing is a case of 3 sharpeners.
Will it fit · Will it hook up
- Outside size
- 9-3/4" W x 4" D x 4-3/4" H; 8.9 lb. each
- Power
- 115V, 0.3 A, 50-60 Hz; grounded outlet matching the base label
- Pack
- Case of 3 sharpeners; 31 lb. case
Pop-out knife guide
The snap-in ABS knife guide lifts out for cleaning and maintenance. An interlock switch keeps the motor off when the guide is out.
Edge from heel to tip
The guide lets the knife heel sit closer to the stone than earlier models, so more of the blade is sharpened.
Knives to cleavers
Sharpens knives from 3/16" up to cleaver blades, and scalloped-edge bread knives too.
Overload protection
The pressure-sensitive motor shuts down if too much pressure is applied, to prevent burn or excess wear.
Stainless housing
All stainless steel housing with a lighted rocker switch that shows when the motor runs.
Replaceable wheel
The grinding wheel assembly, Edlund A526SSP, can be replaced when worn.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- This listing is a case of 3 sharpeners in one 31 lb. master case.
- Each unit plugs into a grounded 115V outlet; check the voltage on the label under the base before you plug it in.
Questions buyers ask
How many sharpeners come with this listing?
This listing is a case of 3 sharpeners. Edlund packs the Model 401 3 to a master case that weighs 31 lb.
What power does it need?
Plug it into a grounded outlet with the same voltage as the label on the bottom of the base: 115V, 0.3 A, 50-60 Hz.
How do I sharpen a knife?
Pull the knife through the left slot with the heel near the front, keeping light, steady pressure, then pull it through the right slot. Repeat until you get the edge you want. Hold the knife firmly.
Can I wash the knife guide?
Yes. The ABS knife guide pops out for cleaning. The sharpener will not run until the guide is snapped back in place.
When does the stone need replacing?
Edlund says the stone lasts up to several years in normal use. Replace it when the knife no longer touches the wheel while it rests against the knife guide. Order grinding wheel assembly A526SSP.
What warranty does it have?
Edlund warrants it against defects in material and workmanship for one year from the date of purchase. The purchaser returns the unit to the factory, freight prepaid.
Specs
| Manufacturer | Edlund |
|---|---|
| Model Number | 401/115V |
| Series | 401 NSF Electric Knife Sharpener |
| Product Code | 40010 |
| Quantity | Case of 3 |
| Unit Weight | 8.9 lb. Each |
| Case Weight | 31 lb.1.1 cu. ft. |
| Width | 9.75 Inches |
| Depth | 4 Inches |
| Height | 4.75 Inches |
| Voltage | 115 Volts |
| Hertz | 50-60 Hz |
| Amps | 0.3 Amps |
| Switch | Lighted Rocker Switch |
| Motor Speed | 1800 RPM |
| Grinding Wheel | 3" Diameter x 1" Wide |
| Knife Range | 3/16" Knives to Cleaver BladesScalloped Bread Knives |
| Housing | All Stainless Steel |
| Knife Guide | Pop-Out ABS Snap-In Guide with Interlock Switch |
| Replacement Grinding Wheel | A526SSP |
| Origin | Made in USA of US and Imported Components |
| Certifications | NSF, cULus Listed, CE |
| Warranty | 1 Year from Date of Purchase |
| Warranty Terms | Parts Found Defective under Normal Use Repaired or ReplacedPurchaser Returns the Unit to the Factory, Freight Prepaid |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


