Hatco 3CS-9-240-1-QS Sanitizing Sink Heater, 9 kW, 240V 1-Phase, Quick-Ship Stock Model
Keeps the rinse water in your third sink compartment at the 180°F the NSF standard calls for, from a 9 kW heater that hangs under the sink.
The Hatco 3CS-9 mounts under the center of a 3- or 4-compartment, pot and pan or bar sink and keeps a continuous supply of 180°F sanitizing rinse water without taking up sink space. At 9 kW it is sized for a compartment of 21"-25" square, based on 140°F supply water and a 30-minute preheat. This listing is the Quick-Ship stock version wired for 240V single phase, 37.5 amps.
Breakers and fused disconnects are mounted remote and wired by your electrical contractor.
The heater hangs below the third compartment, so the full sink stays free for racks and ware.
A stainless steel tank has one reservoir for the submerged element and one that traps soil and empties through a side drain.
An Energy Cut-Off (ECO) shuts the heater down if water runs hotter than normal; a red light tells staff to refill and reset.
An On/Off toggle switch starts the heater and a yellow light shows when power is on.
It ships with all gaskets and fittings, and self-contained unions connect it to the sink fittings.
The 3CS-9 is sized for a sink compartment of 21"-25" square. Hatco sizes sink heaters at 2,000 watts per square foot of vessel top, with 140°F supply water and a 30-minute preheat.
240V single phase, 37.5 amps. Hatco lists 6 AWG wire and a 50 A fuse or circuit breaker. It is hardwired, with no cord.
It mounts under the center of the third compartment. You cut two 2" holes in the sink bottom using the full-size template, and the heater attaches to the supplied plumbing fittings with self-contained unions. The drain has a 3/4" hose connection.
Yes. Hatco states the 3CS meets the NSF standard of 180°F for dish sanitizing. The series carries UL, cUL and NSF certification.
Options must be ordered with the heater: an all stainless steel body and base, a built-in temperature monitor or a temperature light (not both), and a security package with Torx screws and a control cover. A flush kit with hose, stopper and adapter is sold as an accessory.
Hatco gives 1 year parts and labor, and the 3CS tank has 1 year parts and labor plus 4 more years parts only. Failures caused by lime or sediment buildup are not covered.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | 3CS-9-240-1-QS |
| Series | 3CS Sanitizing Sink Heater |
| Version | Hatco Quick-Ship Stock Model, Item 3CS924013240V 1-Phase |
| Shipping Weight | 27 lb. |
| Width | 6.75 Inches |
| Depth | 16.88 Inches |
| Height | 12.63 Inches |
| Sink Area | 21"-25" Square |
| Sizing Basis | 2,000 W per sq. ft. of vessel top, 140°F supply water, 30-minute preheat |
| Rinse Water Temperature | 180°F |
| Power Rating | 9 kW |
| Voltage | 240 Volts |
| Phase | Single Phase |
| Amps | 37.5 Amps |
| Wiring and Breaker | 6 AWG wire, 50 A fuse or circuit breaker |
| Connection | Hardwired, 0.75" conduit knockout; no cord |
| Sink Connection | Two 2" holes in sink bottom, fittings and unions supplied |
| Drain | 0.75" hose connection |
| Water Quality | Treat water over 3.0 grains per gallon hardness |
| Controls | On/Off Toggle SwitchYellow Power LightRed Overtemp and Reset LightEnergy Cut-Off |
| Exterior | Stainless Steel Front, Silver-Gray Hammertone Powder-Coated Body, Black Base |
| Tank | Stainless Steel, Dual Reservoir with Soil Trap and Side Drain |
| Options | All Stainless Steel Body and BaseBuilt-In Temperature Monitor or Temperature Light, Not BothSecurity Package, Torx Screws and Control Cover |
| Accessories | FR-FLUSH Flush Kit: Hose, Stopper and Adapter |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 1 Year Parts and LaborTank 1 Year Parts and Labor Plus 4 Years Parts Only |
| Warranty Notes | Lime or sediment failures not covered24/7 parts and service assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
