Hatco AH30120TCCS Glo-Ray GRAH-30 30" High Watt Aluminum Infrared Strip Heater, 660 W, 120V, Toggle Switch, Cord and Plug, Chain Mount
Hangs over a 30" pass or holding area on its chains and keeps plated food hot without drying it out, plugged into a standard 120V outlet.
The Hatco AH30120TCCS is the 30" high watt Glo-Ray GRAH-30 aluminum infrared strip heater, built as a ready-to-hang package: a built-in On/Off toggle switch, two S hooks with two 6" chains, and an attached 6 ft. cord with NEMA 5-15P plug. It draws 660 watts at 120V, 5.5 amps. Its pre-focused heat pattern covers the whole holding surface with no cold spots.
Measure the length of your pass: the housing is 30" wide and the heat pattern covers the holding surface under it.
The Glo-Ray heat pattern covers the entire holding surface with consistent temperatures and no cold spots.
A built-in On/Off toggle switch, rated to 15 amps, sits on the chef's left side as standard.
Two S hooks with two 6" chains and an attached 6 ft. cord and plug come with it, so it hangs and plugs in without hardwiring.
A sturdy extruded aluminum housing does not sag. The reflector does not blacken, so the heat pattern stays consistent.
Wire guards under the heating element protect it, and insulation cuts heat loss.
A standard 120V NEMA 5-15 receptacle. It draws 660 watts, 5.5 amps, through the attached 6 ft. cord.
Hatco recommends 11" to 14" above the food for high watt Glo-Ray units, with 11" minimum to the surface below for corded units with built-in switches.
The standard GRAH-30 is hardwired with 3 ft. of conduit. This AH30120TCCS version comes with a built-in toggle switch, S hooks, chains and an attached cord and plug.
No. The toggle switch turns it on and off. Hatco sells the same heater with a built-in infinite control as a separate item.
Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts only, and other parts for 18 months, with 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | AH30120TCCS |
| Series | Glo-Ray GRAH-30 High Watt Aluminum Infrared Strip Heater |
| Shipping Weight | 8 lb. |
| Width | 30 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Voltage | 120 Volts |
| Wattage | 660 Watts |
| Amps | 5.5 Amps |
| Phase | Single Phase |
| Plug Type | NEMA 5-15P |
| Cord | Attached 6 ft. Cord and Plug |
| Controls | Built-In On/Off Toggle Switch, Max. 15 Amps, Chef's Left Side |
| Mounting | Two S Hooks with Two 6" Chains |
| Recommended Mounting Height | 11" to 14" Above Food, High Watt |
| Minimum Clearances | Pass-Through Area Only3" Below Overshelf11" to Surface Below3" to Wall |
| Housing | Extruded Aluminum, Clear Anodized |
| Heating Element | Metal-Sheathed Element with Protective Wire Guard |
| Accessories | QSANGLE Adjustable Angle Brackets |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months |
| Warranty Notes | 24/7 parts and service assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
