Hatco AH60120ICCS Glo-Ray GRAH-60 60" High Watt Aluminum Infrared Strip Heater, 1,400 W, 120V, Infinite Control, Cord and Plug, Chain Mount
Hangs over a 60" pass or holding area on its chains and keeps plated food hot without drying it out, plugged into a standard 120V outlet.
The Hatco AH60120ICCS is the 60" high watt Glo-Ray GRAH-60 aluminum infrared strip heater, built as a ready-to-hang package: a built-in infinite control, two S hooks with two 6" chains, and an attached 6 ft. cord with NEMA 5-15P plug. It draws 1,400 watts at 120V, 11.7 amps. Its pre-focused heat pattern covers the whole holding surface with no cold spots.
Measure the length of your pass: the housing is 60" wide and the heat pattern covers the holding surface under it.
The Glo-Ray heat pattern covers the entire holding surface with consistent temperatures and no cold spots.
A built-in infinite switch lets staff dial the heat up or down. Hatco rates built-in infinite switches to 12.2 amps.
Two S hooks with two 6" chains and an attached 6 ft. cord and plug come with it, so it hangs and plugs in without hardwiring.
A sturdy extruded aluminum housing does not sag. The reflector does not blacken, so the heat pattern stays consistent.
Wire guards under the heating element protect it, and insulation cuts heat loss.
A standard 120V NEMA 5-15 receptacle. It draws 1,400 watts, 11.7 amps, through the attached 6 ft. cord.
Hatco recommends 11" to 14" above the food for high watt Glo-Ray units, with 11" minimum to the surface below for corded units with built-in switches.
The standard GRAH-60 is hardwired with 3 ft. of conduit. This AH60120ICCS version comes with a built-in infinite control, S hooks, chains and an attached cord and plug.
Yes. The built-in infinite control varies the heat output.
Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts only, and other parts for 18 months, with 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | AH60120ICCS |
| Series | Glo-Ray GRAH-60 High Watt Aluminum Infrared Strip Heater |
| Shipping Weight | 14 lb. |
| Width | 60 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Voltage | 120 Volts |
| Wattage | 1,400 Watts |
| Amps | 11.7 Amps |
| Phase | Single Phase |
| Plug Type | NEMA 5-15P |
| Cord | Attached 6 ft. Cord and Plug |
| Controls | Built-In Infinite Switch, Max. 12.2 Amps |
| Mounting | Two S Hooks with Two 6" Chains |
| Recommended Mounting Height | 11" to 14" Above Food, High Watt |
| Minimum Clearances | Pass-Through Area Only3" Below Overshelf11" to Surface Below3" to Wall |
| Housing | Extruded Aluminum, Clear Anodized |
| Heating Element | Metal-Sheathed Element with Protective Wire Guard |
| Accessories | QSANGLE Adjustable Angle Brackets |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months |
| Warranty Notes | 24/7 parts and service assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
