Hatco CSBFP-36-F R-290 Built-In Flush Top Cold Shelf, Hardcoat Aluminum, 36" x 15.5" Usable, 120V
Description
A built-in cold shelf that keeps pans of pre-chilled food and drinks cold on a buffet or serving line, with 36" x 15.5" of chilled hardcoat aluminum surface.
The Hatco CSBFP-36-F is a self-contained cold shelf that drops into a countertop cutout and sits flush with the top. A copper evaporator coil under the hardcoat aluminum surface chills it edge to edge, and an attached 1/5 HP condensing unit runs on R-290 refrigerant. It plugs into a standard 120V outlet with a NEMA 5-15P plug, and the electronic control box can hang up to 4 ft. away on its lead wire.
Will it fit · Will it hook up
- Outside size
- 37.5" W x 17" D x 23.125" H (height adjustable up to 38")
- Counter cutout
- 36.6" to 37" wide x 16.125" to 16.5" deep
- Power
- 120V, 60 Hz, single phase, 345 W, 5.2 A; 6 ft. cord with NEMA 5-15P plug
- Ventilation
- Closed cabinets need 12" x 12" louvered or grill openings and intake ducting; keep 7" clear around the condensing unit
- Room
- Indoors, cabinet air 65°F to 86°F, away from fryers, grills, exhaust hoods and air currents
Measure the counter opening before ordering: the cutout sizes above are what the shelf drops into.
R-290 refrigeration
An attached 1/5 HP condensing unit uses R-290 refrigerant, 3.1 oz. factory fill. Hatco states R-290 absorbs heat 90% better than other refrigerants for faster recovery and lower energy use.
Thermal break
A patented thermal break cuts condensation and cold transfer onto the countertop around the shelf.
Hardcoat aluminum top
The top-mounted hardcoat aluminum surface matches the Hatco GRSBF heated built-in shelves. Always set food in pans; do not put food straight on the surface.
Digital control box
An electronic temperature control box with on/off switch comes on a 4 ft. lead wire, so it can mount on the cabinet front away from the shelf. Hatco presets it to 25°F and auto-defrost can be set on site.
Condenser position
The condensing unit sits under the left end as standard; a center-aligned condenser is a no-charge factory option.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- Approximate shipping weight is 121 lb. The shelf arrives in a shipping frame; keep it in the frame until the counter and cabinet are ready.
- Hatco ships the installation kit (intake bracket, duct clamp, flexible duct and duct collar) separately from the shelf.
- If it arrives in cold weather, let it sit at 65°F to 86°F for 10 hours before switching it on, to protect the compressor.
- Installation must be done by qualified installers to local electrical and plumbing codes. The condensing unit must be sealed off from other electrical devices in the cabinet, and R-290 service needs a technician trained on flammable refrigerant.
- Seal the shelf to the countertop with NSF-approved silicone sealant rated for -10°F to 250°F.
Questions buyers ask
What size counter cutout does it need?
Cut 36.6" to 37" wide and 16.125" to 16.5" deep. The overall shelf is 37.5" x 17", so the rim rests on the countertop.
What outlet does it need?
A grounded 120V, 60 Hz outlet for the NEMA 5-15P plug on the 6 ft. cord. It draws 5.2 amps and 345 watts.
Can it cool food down?
No. It holds food and drinks that are already chilled. Hatco presets it to 25°F; let it run about 60 minutes before you load pans of pre-chilled food.
Can it go in a closed cabinet?
Yes, with ventilation. Hatco calls for 12" x 12" louvered or grill openings and intake ducting, at least 7" around the condensing unit, and cabinet air no warmer than 86°F. Do not store anything in that cabinet.
What options are there?
At order time only: a center-aligned condenser and an additional 4-year parts-only compressor warranty.
What warranty does it have?
Hatco's manual refers to a standard one year warranty, with 24/7 parts and service help in the US and Canada. An extra 4-year parts-only compressor warranty can be bought with the unit.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | CSBFP-36-F |
| Series | CSBFP R-290 Cold Shelves Built-In Flush Top |
| Type | R-290 Cold Shelf, Built-In Flush Top, Hardcoat Aluminum |
| Shipping Weight | 121 lb. |
| Width | 37.5 Inches |
| Depth | 17 Inches |
| Height | 23.125 Inches |
| Adjustable Height | Up to 38 Inches |
| Usable Shelf Space | 36" W x 15.5" D |
| Cutout Width | 36.6 to 37 Inches |
| Cutout Depth | 16.125 to 16.5 Inches |
| Refrigerant | R-290, 3.1 oz. Factory Fill |
| Compressor | 1/5 HP, Self-Contained, Attached |
| Heat of Rejection | 2,123 BTU/hr |
| Factory Setpoint | 25°F |
| Condenser Location | Left Aligned StandardCenter Aligned Optional |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | Single Phase |
| Amps | 5.2 Amps |
| Wattage | 345 Watts |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. from the Control Box |
| Control Type | Electronic Temperature Control Box with On/Off SwitchAuto-Defrost Set On Site |
| Control Lead | 4 ft. Lead Wire Standard |
| Surface | Hardcoat Aluminum |
| Thermal Break | Patented, Reduces Condensation on Adjacent Surfaces |
| Housing | Insulated Stainless Steel and Aluminized Steel |
| Included | Electronic Temperature Control BoxAttached Condensing UnitCord and PlugInstallation Kit Shipped Separately |
| Factory Options | Center-Aligned CondenserAdditional 4-Year Compressor Parts Warranty7-1/2 ft. Control Cable |
| Certifications | cULus, NSF Component |
| Made In | USA |
| Ecoization | Yes |
| Warranty | 1 Year Standard |
| Compressor Warranty Option | Additional 4 Years Parts Only, Ordered with the Unit |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

