Hatco EP15-84 Flav-R-Shield Full-Service Pass-Over Sneeze Guard, 84" Wide, 2 Bays, 22" High, 18" Deep End Panels
An 84-inch, 2-bay glass sneeze guard that shields a full-service counter while staff pass food over the top.
The Hatco EP15-84 is a Flav-R-Shield EP15 full-service pass-over sneeze guard for stationary buffet lines and serving stations. It is 84" wide from end post center to end post center, 2 bays long and 22" high, with a glass face panel and two 18" deep glass end panels. Posts are 1" brushed SAE 304 stainless steel, and the glass is 1/4" tempered with radius corners and flat polished edges. It mounts to stainless steel, natural or engineered solid stone, and laminate countertops.
Measure the counter run: the end flanges take 86" of length and 20" of depth.
1" diameter brushed SAE 304 stainless steel posts. Front posts tilt back at 80 degrees; back posts stand at the rear of the 18" deep glass end panels.
Durable 0.25" thick tempered glass with 0.75" radius corners and flat polished edges.
2" diameter stainless steel finish flanges with tight-fitting flange covers that hide the mounting screws and are easy to wipe clean.
Two 18" deep glass end panels. Hatco states 18" deep end panels are required to meet NSF standards.
Mounts to stainless steel, natural and engineered solid stone, and laminate countertops.
The EP15-84 is 84" from end post center to end post center and 86" across the outside of the flanges. Depth is 18" (front post center to back post center), 20" over the flanges, and the posts are 22" high.
Yes, as configured. Hatco states that 18" deep end panels are required to meet NSF standards, and this model has two 18" deep end panels. The spec sheet carries the NSF Component mark.
Stainless steel, natural and engineered solid stone, and laminate countertops. It screws down through 2" flanges with covers. Fasteners are not included; Hatco recommends 2" long #8 countersink screws for most surfaces.
This listing is the standard model. Hatco also builds custom units: post heights of 8" to 30", face panel widths of 8" to 42" per bay, right-only, left-only or no end panels, above or below counter compression flanges, square glass corners, a light bar, black powder coated posts, adjustable brackets and frosted glass. Ask us for a quote on a custom build.
Hatco lists a one year parts only warranty.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | EP15-84 |
| Series | Flav-R-Shield Full-Service Pass-Over Sneeze Guard, Model EP15 |
| Type | Stationary Full-Service Pass-Over Sneeze Guard |
| Number of Bays | 2 |
| Shipping Weight | 106 lb. |
| Packaging | May Ship in Multiple Boxes |
| Width | 84 Inches |
| Width Measured | Center of End Post to Center of End Post |
| Outside Flange Width | 86 Inches |
| Depth | 18 Inches |
| Depth Measured | Center of Front Post to Center of Back Post |
| Outside Flange Depth | 20 Inches |
| Height | 22 Inches |
| Glass | 0.25" Thick Tempered Glass0.75" Radius CornersFlat Polished Edges |
| Panels | Glass Face PanelTwo 18" Deep Glass End Panels |
| Posts | 1" Diameter Brushed SAE 304 Stainless SteelFront Posts Tilted Back to 80 Degrees |
| Post Style | Front and back posts at each end |
| Flanges | 2" Diameter Stainless Steel Finish with Flange CoversCover 2.1" Diameter x 1.0" HighFlange 0.875" High |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate Countertops |
| Fasteners | Not Included2" Long #8 Countersink Screws Recommended for Most Surfaces |
| Certifications | NSF Component, SGCC Safety Glazing |
| NSF Note | 18" Deep End Panels Required to Meet NSF Standards |
| Country of Manufacture | Made in the USA |
| Returns | Custom by Nature, Non-Returnable per Hatco |
| Warranty | 1 Year Parts Only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
