Hatco GRA-24-120-T-QS Glo-Ray Aluminum Infrared Strip Heater, 24" W, 350 W, 120V, Toggle Switch, Quick-Ship
A 24-inch Glo-Ray heat strip that keeps food hot on the pass without drying it out.
The Hatco Glo-Ray GRA-24 is a 24-inch standard watt infrared strip heater that holds food at serving temperature without drying them out or cooking them further. The extruded aluminum housing does not sag, and its reflector does not blacken, so the pre-focused heat pattern stays even across the holding area. It is rated 350 watts at 120 volts and has the built-in toggle switch. This listing is Hatco's Quick-Ship 120V toggle GRA-24; Hatco stocks it hardwired with conduit (item GRA24115T) and with S-hooks, chains and a NEMA 5-15P cord (item GRA24120TCCS), so confirm which one you need when you order.
Measure the pass: the heater is 24" long and 6" deep.
The pre-focused pattern covers the whole holding surface with no cold spots, and the reflector does not blacken over time.
Extruded aluminum housing, 24" long, 6" deep and 2-1/2" high, does not sag. Insulation cuts heat loss.
A built-in toggle switch (15 A max.) sits on the chef's left side. Infinite controls, remote switches and remote boxes are options.
A wire guard under the metal-sheathed element protects it. The unit arrives factory assembled with mounting tabs.
Mount it under a shelf with angle brackets, hang it on chains, or set it on C-leg, T-leg or tubular stands (options).
Single phase at 120 volts. It draws 350 watts: 2.9 A at 120V.
Standard units are hardwired with 3 ft. of conduit. A 6 ft. cord and NEMA 5-15P plug is an option on 120V units up to 72" when hung on chains or set on C-leg or T-leg stands.
Hatco recommends 8" to 11" above the food for standard watt units. Over combustible surfaces keep at least 10" to the surface and 1" below the overshelf.
Yes, as an option at purchase: built-in (up to 12.2 A) or remote infinite switch. Hatco recommends a remote enclosure, mounted outside the heat zone.
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. The metal-sheathed heating element is covered for 1 year parts and labor plus 1 more year parts only. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRA-24 |
| Hatco Quick-Ship Items | GRA24115T Hardwired with ConduitGRA24120TCCS with S-Hooks, Chains and Cord |
| Series | Glo-Ray Aluminum Infrared Strip Heater, GRA |
| Type | Overhead Infrared Strip Heater |
| Shipping Weight | 7 lb. |
| Width | 24 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Element | Pre-Focused Tubular Metal-Sheathed Infrared Element |
| Wattage Class | Standard Watt |
| Watts | 350 Watts |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 2.9 Amps |
| Connection | 3 ft. Flexible Conduit with 42" Leads, Server's RightOptional 6 ft. Cord with NEMA 5-15P on 120V |
| Controls | Built-In Toggle Switch, 15 A Max., Chef's Left Side |
| Recommended Height | 8" to 11" Above Food |
| Clearances | Combustibles: 1" Below Overshelf, 10" to Surface Below, 3" to Wall |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Factory Options | Designer Colors and Gloss FinishesIndicator LightExtended Power LeadsSneeze Guard 9.375" or 14", One or Two Sides |
| Control and Mounting Options | Built-In or Remote Infinite ControlNo ControlRemote Control Enclosure RMBTubular, C-Leg or T-Leg StandsCord and Plug SetS-Hooks and Chains |
| Accessories | Adjustable Angle Brackets 1"-2" or 7"Chain Suspension |
| Certifications | cULus, NSF, CE |
| Country of Origin | Made in the USA |
| Warranty | 18 Months Limited |
| Element Warranty | Metal-Sheathed Element: 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Warranty Notes | From shipment or product registration, whichever is laterRegister within 90 days of shipment24/7 parts and service assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
