Hatco GRA-60 Glo-Ray 60" Aluminum Infrared Strip Heater, Standard Watt, 1050 W, Toggle Switch, Conduit, 120V
A 60-inch Glo-Ray strip heater with a built-in toggle switch and conduit, for hardwired mounting under a shelf or over a pass-through.
The Hatco GRA-60 is a standard watt Glo-Ray aluminum strip heater rated 1050 watts at 120V, single phase, 8.8 amps. This listing is the 120V version with a built-in toggle switch and 36" flexible metal conduit with 42" wire leads at the server's right. The housing is 60" W x 6" D x 2-1/2" H. Pre-focused reflectors spread the heat from a metal sheathed element across the holding area with no cold spots.
Measure the shelf: the heater is 60" long and 6" deep, and the switch sits on the chef's left end.
Specially designed reflectors aim the heat across the entire holding surface with no cold spots, and the reflector does not blacken over time.
The continuous extruded aluminum housing does not sag, even on long runs, and insulation keeps heat aimed down at the food.
1050 watts across 60", with a recommended 8" to 11" mounting height above the food.
Wire guards under the element protect staff without blocking heat.
This listing is a set configuration: 120V, built-in toggle switch and conduit with leads for hardwiring.
No. This version is hardwired through 36" flexible metal conduit with 42" leads. It runs on 120V, single phase, 8.8 amps. Hatco offers a cord and plug only on 120V units 72" or narrower with C-leg, T-leg or chain mounting.
Hatco recommends 8" to 11" for standard watt units. Keep it at least 10" above combustible surfaces and 3" from a combustible wall.
Yes, the toggle switch is built into the housing on the chef's left side and is rated max. 15 amps.
Hatco covers defects for 18 months from shipment or registration, whichever is later. The metal sheathed heating element has 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Turn it off, unplug or switch off the breaker and let it cool. Wipe it daily with a water-dampened, non-abrasive cloth, use a non-abrasive cleaner on stubborn stains, then wipe dry. Do not steam clean, use a jet spray or soak it.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRA-60 |
| Series | Glo-Ray Aluminum Infrared Strip Heaters, GRA and GRAH |
| Type | Overhead Infrared Strip Warmer, Standard Watt |
| Shipping Weight | 14 lb. |
| Width | 60 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Voltage | 120 Volts |
| Phase | 1 |
| Watts | 1050 Watts |
| Amps | 8.8 Amps |
| Connection | Hardwired36" Flexible Metal Conduit with 42" Wire Leads, Server's Right |
| Control Type | Built-In Toggle Switch, Chef's Left, Max. 15 Amps |
| Recommended Mounting Height | 8" to 11" Standard Watt |
| Clearances | Combustibles: 10" to Surface Below, 3" to Wall, 1" Below Overshelf |
| Mounting | Factory Assembled with Mounting Tabs |
| Housing | Continuous Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Tubular Metal Sheathed, Pre-Focused Reflector |
| Guard | Protective Wire Guards Under Element |
| Accessories | Adjustable Angle Brackets 1" to 2" or 7"Chain Suspension |
| Certifications | cULus, NSF |
| Country of Origin | Made in the USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Element Warranty | 1 Year Parts and Labor Plus 1 Additional Year Parts Only, Metal Sheathed Element |
| Support | 24/7 Parts and Service Assistance, U.S. and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
