Hatco GRAH-120D Glo-Ray 120" Dual Aluminum Infrared Strip Heater, High Watt, 6" Spacer, 18" Deep, 5600 W
Two 120-inch Glo-Ray heaters side by side on one 18-inch-deep frame, for a deeper pass-through or holding shelf that keeps plated food hot without drying it out.
The Hatco GRAH-120D is a high watt Glo-Ray dual strip heater: two 6" aluminum heater sections joined by a 6" center spacer, for an overall size of 120" W x 18" D x 2-1/2" H. It is rated 5600 watts, single phase, and is built for 208V or 240V. Pre-focused reflectors spread the heat from the metal sheathed elements across the whole holding surface, so there are no cold spots. Hatco offers this size only with remote switches or an RMB remote control box, which is ordered separately. Power leaves through conduit at the server's right. Voltage is set when the unit is ordered.
Measure the shelf: the heater is 120" long and 18" deep, and the switch sits on the chef's left end.
Two 6" heater sections with a 6" center spacer cover a 18"-deep area, so one unit heats a full-depth pass-through.
Specially designed reflectors aim the heat across the entire holding surface with no cold spots, and the reflector does not blacken over time.
The continuous extruded aluminum housing does not sag, even on long runs, and insulation keeps heat aimed down at the food.
5600 watts across 120" for longer holding distances; Hatco recommends a 14" to 18" mounting height.
Units 108" and wider have end-to-end elements that can be controlled separately, so you heat only the section in use.
Clear anodized aluminum is standard; 12 Designer and Gloss finishes are optional at order. Non-standard colors cannot be returned.
Single phase at 208V or 240V, 5600 watts: 208V 26.9 A, 240V 23.3 A. The unit is hardwired; pick the voltage when you order.
Hatco recommends 14" to 18" for high watt dual units. Dual heaters cannot be installed in combustible surroundings.
The spacer is the center section between the two heaters. The 3" spacer makes the unit 15" deep; the 6" spacer makes it 18" deep for a deeper holding area. This listing is the 6" spacer, 18" deep.
Hatco offers 108" and wider dual units only with remote switches or an RMB remote control box, which is not included. Remote toggle switches are rated max. 15 amps, remote infinite switches max. 12.2 amps. Mount the box outside the heat zone.
Hatco covers defects for 18 months from shipment or registration, whichever is later. The metal sheathed heating element has 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Turn it off, unplug or switch off the breaker and let it cool. Wipe it daily with a water-dampened, non-abrasive cloth, use a non-abrasive cleaner on stubborn stains, then wipe dry. Do not steam clean, use a jet spray or soak it.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-120D |
| Series | Glo-Ray Aluminum Dual Infrared Strip Heaters, GRA-D and GRAH-D |
| Type | Dual Overhead Infrared Strip Warmer, High Watt |
| Shipping Weight | 66 lb. |
| Width | 120 Inches |
| Depth | 18 Inches |
| Height | 2.5 Inches |
| Center Spacer | 6 Inches |
| Voltage | 208 or 240 Volts |
| Phase | 1 |
| Watts | 5600 Watts |
| Amp Ratings | 208V 26.9 A240V 23.3 A |
| Connection | Hardwired3 ft. Conduit with Leads, Server's RightConduit Standard on 120V and 208V |
| Elements | Tandem End-to-End Elements, Individually Controllable |
| Control Type | Remote Toggle Switches, Max. 15 Amps, or Remote Infinite Switches, Max. 12.2 Amps |
| Remote Control | Available with RMB Remote Box or Remote Switch OnlyRMB Not Included |
| Recommended Mounting Height | 14" to 18" High Watt |
| Clearances | Non-Combustible Surroundings OnlyBuilt-In Switches: 10" to Surface Below, Pass-Through Only, 1" Below OvershelfRemote Switches: 8" to Surface Below, 3" to Wall, Flush to Overshelf |
| Mounting | Four Shelf Mounting Tabs |
| Housing | Continuous Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Tubular Metal Sheathed, Pre-Focused Reflector |
| Guard | Reinforced Wire Guards |
| Factory Options | Designer Color or Gloss FinishRemote Indicator LightExtended Leads 1 to 20 ft.Sneeze Guard 9.375" or 14", One or Two SidesRemote Infinite Switches, Max. 12.2 ARemote Toggle Switches, Max. 15 ARemote Box RMB |
| Size and Mounting Options | 3" Spacer, 15" Deep, Standard6" Spacer, 18" DeepAdjustable Tubular Stands 10" to 14"Non-Adjustable Tubular Stands 10", 12", 14" or 16" |
| Designer and Gloss Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper, Radiant Red, Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue |
| Accessories | Adjustable Angle Brackets 1" to 2"Chain Suspension |
| Certifications | cULus, NSF |
| Country of Origin | Made in the USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Element Warranty | 1 Year Parts and Labor Plus 1 Additional Year Parts Only, Metal Sheathed Element |
| Support | 24/7 Parts and Service Assistance, U.S. and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
