Hatco GRAH-60-120-T-QS Glo-Ray 60" High Watt Infrared Strip Heater, Toggle Switch, 120V 1,400W
Description
A 60-inch high watt overhead heat strip, 120V, that keeps plated food hot at the pass.
The Hatco GRAH-60-120-T-QS is the 120V Quick-Ship version of the Glo-Ray GRAH-60, a 60" high watt aluminum strip heater. A tubular metal-sheathed element and a pre-focused reflector spread 1,400 W of infrared heat across the holding area, so food stays hot without drying out. It is single phase and draws 11.7 A at 120V. It has a built-in toggle switch. Hatco's Quick-Ship list carries this 120V toggle model two ways, hardwired with a 36" conduit (AH60115T) or with a 6 ft. cord, NEMA 5-15P plug, S-hooks and chains (AH60120TCCS); confirm which one you need when you order.
Will it fit · Will it hook up
- Outside size
- 60" W x 6" D x 2-1/2" H aluminum housing
- Power
- 1,400 W, 120V single phase, 11.7 A at 120V
- Hookup
- Hardwired with 36" conduit (AH60115T) or 6 ft. cord with NEMA 5-15P, S-hooks and chains (AH60120TCCS); confirm at order
- Mounting height
- Hatco recommends 11" to 14" from element to food for high watt models
- Clearances
- At least 13-1/2" above combustible surfaces, 3" from a combustible wall, 1" below an overshelf
- Pass depth
- A single unit suits a 12" to 16" deep pass-through; Hatco recommends a dual unit for 20" to 24"
Measure the span: the housing is 60" long, and keep at least 3" between two strip heaters mounted side by side.
Pre-focused infrared heat
The tubular metal-sheathed element and pre-focused reflector cover the whole holding surface with 1,400 W, with no cold spots.
High watt output
GRAH models are Hatco's high watt version, mounted 11" to 14" above the food; standard watt GRA models mount at 8" to 11".
No-sag aluminum housing
A continuous extruded aluminum housing spans the full 60" without sagging, and the reflector does not blacken.
Insulated, guarded element
Insulation minimizes heat loss, and a protective wire guard sits under the element.
Simple toggle control
A built-in on/off toggle switch, rated 15 A max., sits on the chef's left side as standard.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 14 lb.
- A qualified electrician hardwires it to a grounded circuit of the correct voltage. Units are voltage specific; check the specification label first.
- Use adjustable angle brackets for under-shelf mounting, or chains or tubular stands.
- Manufacturing oils may smoke for up to 30 minutes at first start-up. Run it empty until the smoke stops.
- Clean it daily once it is off and cool: wipe with a damp, non-abrasive cloth and dry it. Never submerge or steam clean it.
Questions buyers ask
What power does it need?
120V single phase. At 1,400 W it draws 11.7 A at 120V.
Is it hardwired or plug-in?
Hatco's Quick-Ship list has both: AH60115T is hardwired through a 36" conduit, and AH60120TCCS has a 6 ft. cord with NEMA 5-15P plug, S-hooks and chains. Tell us which one you need when you order.
How high should I hang it?
Hatco recommends 11" to 14" from the element to the food for high watt models, and at least 13-1/2" above combustible surfaces.
Can I add a remote switch or infinite control?
Yes, at the time of purchase. Hatco offers built-in or remote infinite controls (12.2 A max.) and remote control enclosures (RMB). Mount any remote box outside the heat zone.
What warranty does Hatco give?
Hatco repairs or replaces defective parts for 18 months from shipment or registration, whichever is later. The metal-sheathed heating element has 1 year parts and labor plus a second year parts only. Register within 90 days.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAH-60 |
| Store SKU Model | GRAH-60-120-T-QS = Hatco GRAH-60, 120V Quick-Ship Version |
| Hatco Item Number | AH60115T or AH60120TCCS, Confirm at Order |
| Series | Glo-Ray Aluminum Infrared Strip Heater GRA/GRAH |
| Wattage Class | High Watt |
| Shipping Weight | 14 lb. |
| Shipping Weight Note | Includes PackagingRemote Control Box Not Included |
| Width | 60 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Wattage | 1,400 Watts |
| Voltage | 120 Volts |
| Phase | Single Phase |
| Amps | 11.7 Amps |
| Connection | Hatco Quick-Ship Lists Two 120V Toggle Versions: AH60115T Hardwired with 36 Inch ConduitAH60120TCCS with 6 ft. Cord, NEMA 5-15P, S-Hooks and Chains |
| Control Type | Built-In Toggle Switch, Chef's Left Side Standard |
| Switch Ratings | Toggle Switch Max. 15 AInfinite Switch Max. 12.2 A |
| Element | Tubular Metal-Sheathed Infrared ElementPre-Focused Heat PatternReflector Does Not Blacken |
| Element Height | 11 to 14 Inches Above the Food, High Watt |
| Clearance to Combustibles | 13-1/2 Inches Above Combustible Surfaces3 Inches From a Combustible Wall1 Inch Below an Overshelf |
| Pass-Through Depth | Single Unit for a 12 to 16 Inch Deep Pass-Through |
| Exterior | Continuous Extruded Aluminum Housing, Clear Anodized Standard |
| Interior | Insulated HousingProtective Wire Guard Under the Element |
| Mounting | Factory Assembled with Mounting Tabs |
| Accessories | Adjustable Angle Brackets 1 to 2 InchChain Suspension |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterRegister within 90 days of shipment |
| Element Warranty | Metal-Sheathed Food Warmer Element 1 Year Parts and Labor Plus 1 Additional Year Parts Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
| Not Covered | Glass Components and Fuses |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

