Hatco GRAL-108 Glo-Ray Infrared Aluminum Strip Heater, 108" W, 9 Lights, 2,390W, 120, 120/208 or 120/240V
Holds plated food hot under a 108" pass or shelf and lights it up for the line, from one hardwired aluminum strip.
The Hatco GRAL-108 is a 108" Glo-Ray infrared strip heater with 9 built-in display lights. Its standard watt element puts out 2,390 watts, and the pre-focused heat pattern covers the holding surface with no cold spots. The extruded aluminum housing is 108" W x 9" D x 2-1/2" H and comes clear anodized. Pick 120V, 120/208V or 120/240V single phase in the voltage dropdown.
Measure the pass: the housing is 108" wide and 9" deep, and it is hardwired, so plan an electrician.
The Glo-Ray heat pattern spreads heat across the holding surface with no cold spots and keeps food at serving temperature longer.
9 coated, shatter-resistant 60 W incandescent bulbs, one per foot, light the food and guard it from bulb breakage.
The 108" extruded aluminum housing does not sag, and the reflector does not blacken, so the heat pattern stays consistent.
A metal-sheathed heating element sits behind a reinforced wire guard that does not change the heat pattern.
Designer colors, gloss finishes, sneeze guards, halogen bulbs, extra lamps, remote or infinite switches and stands are chosen at purchase.
It draws 2,390 W: 19.9 A at 120V, 13.4 A at 120/208V or 12.2 A at 120/240V, single phase. On 120/208V and 120/240V units the lights run on 120V and the heat on 208V or 240V.
Hatco recommends 8" to 11" above the food. Use adjustable angle brackets under a shelf, chain suspension or tubular stands.
Standard units are hardwired with 36" conduit. Hatco does not offer a cord and plug for this length on 120V; plan to hardwire it.
The standard control is an On/Off toggle. A built-in or remote infinite control (max. 12.2 A) can be ordered instead; Hatco asks you to consult the factory if the element draws more than 12.2 A.
Hatco covers the metal-sheathed element for 1 year parts and labor plus 1 more year parts only, and other parts for 18 months. Bulbs are not covered. 24/7 parts and service help is available in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRAL-108 |
| Series | Glo-Ray Infrared Aluminum Strip Heater with Lights |
| Type | Standard Watt Infrared Strip Heater |
| Shipping Weight | 36 lb. |
| Weight Note | Approximate, Not Including Remote Control Enclosure |
| Width | 108 Inches |
| Depth | 9 Inches |
| Height | 2.5 Inches |
| Voltage | 120, 120/208 or 120/240 Volts |
| Hertz | 60 Hz |
| Phase | Single Phase |
| Wattage | 2,390 Watts |
| Amps by Voltage | 120V 19.9 A120/208V 13.4 A120/240V 12.2 A |
| Circuits | 120/208V and 120/240V Units Run Lights on 120V and Heat on 208V or 240V |
| Connection | 36" flexible metal conduit with 42" wire leads, server's right; hardwired |
| Voltage Notes | Widths of 108" and up use tandem end-to-end elements that may be controlled separately; 120V models may need extra switches. |
| Heating Element | Tubular Metal-Sheathed Element with Reinforced Wire Guard |
| Wattage Class | Standard Watt |
| Lights | 9 Bulbs60 W Coated Shatter-Resistant Incandescent, One per Foot |
| Controls | Built-in On/Off toggle switch, max. 15 A, on the chef's left side (light side) |
| Recommended Mounting Height | 8" to 11" Above Food |
| Minimum Clearances | Hardwired with built-in switch: 8" to the surface below, pass-through area only, 1" below an overshelfWith remote switches: 8" below, 0" to the back wall and overshelf |
| Clearances Near Combustibles | 10" to Surface Below3" to Back Wall1" Below Overshelf |
| Overshelf Setback | Remote Switches: Maximum 10" From the Front of an Overshelf |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Insulation | Heavy-Duty Insulation |
| Mounting Tabs | Four Stainless Steel Shelf Mounting Tabs |
| Factory Options | Designer Colors or Gloss FinishesSneeze Guards 9-3/8" or 14", One or Two SidesHalogen BulbsNo Bulbs, 120VExtra Lamps |
| More Factory Options | Indicator LightInfinite or Remote SwitchesRemote BoxTubular, C-Leg or T-Leg StandsExtended Leads |
| Accessories | Adjustable Angle Brackets 1"-2" or 7"Chain SuspensionChef LED Bulbs CLED-3000-120, CLED-4000-120 |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months |
| Warranty Notes | Bulbs Not Covered24/7 Parts and Service Assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
