Hatco GRH-72 Glo-Ray Stainless Steel High Watt Infrared Strip Heater, 72" W, 1725W, 120, 208 or 240V
A 72-inch stainless steel high watt strip heater that holds plated food and pass-through orders at serving temperature.
The Hatco GRH-72 is the high watt model of the Glo-Ray Infrared Stainless Steel Strip Heater: 1725 watts from a tubular metal-sheathed element in a 72" W x 6" D x 2.75" H stainless housing. Its pre-focused heat pattern covers the entire holding surface with no cold spots. It is built for one voltage, 120, 208 or 240V single phase, set at order, and comes with four stainless steel mounting tabs, a toggle switch on the chef's left and 3 ft. of conduit with leads.
Hatco units are voltage-specific. Order the voltage that matches your circuit and check the specification label before wiring.
The Glo-Ray reflector directs heat from a tubular element across the entire holding surface, so food holds at serving temperature with no cold spots.
High watt models put out more heat than the standard GR-72 for higher mounting, 11" to 14" above the food.
The stainless housing has heavy-duty insulation to minimize heat loss. The reflector does not blacken, keeping the heat pattern consistent.
A reinforced wire guard protects operators without affecting heat distribution.
Factory assembled with four stainless steel shelf mounting tabs. Tubular, C-leg and T-leg stands, chain kits and adjustable angle brackets are available.
It runs on single-phase 120, 208 or 240V, set when you order. At 1725 watts it draws 120V 14.4 A, 208V 8.3 A or 240V 7.2 A.
On 120V units, Hatco offers a 6 ft. cord with NEMA 5-15P when the heater is mounted on C-leg or T-leg stands or a chain kit. Otherwise it is hardwired through 3 ft. of conduit. Hatco notes the 72" high watt model needs a NEMA 5-20P cord in Canada.
Yes. A toggle switch, max. 15 amps, is standard on the chef's left. A built-in infinite control (max. 12.2 amps) or remote toggle or infinite switches can be ordered at time of purchase. Infinite control is not available on the 120V model.
Hatco recommends 11" to 14" above the food for high watt models. Near combustibles keep 13.5" to the surface below, 3" to the back wall and 1" below an overshelf.
The Hatco spec sheet for the GR and GRH series shows cULus and NSF marks.
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. Hatco lists metal-sheathed food warmer elements at 1 year parts and labor plus 1 more year parts only. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRH-72 |
| Series | Glo-Ray Infrared Stainless Steel Strip Heaters |
| Type | High Watt Infrared Strip Heater |
| Shipping Weight | 19 lb. |
| Width | 72 Inches |
| Depth | 6 Inches |
| Height | 2.75 Inches |
| Voltage | 120, 208 or 240 Volts |
| Phase | 1 |
| Wattage | 1725 Watts |
| Amps | 14.4 at 120V8.3 at 208V7.2 at 240V |
| Voltage Selection | One voltage per unit, specified at order |
| Connection | 3 ft. Flexible Metal Conduit with Leads, Server's Right |
| Cord Option | Attached 6 ft. Cord with NEMA 5-15P, 120V, with C-Leg, T-Leg or Chain MountNEMA 5-20P in Canada |
| Element | Tubular Metal-Sheathed Infrared |
| Recommended Mounting Height | 11 to 14 Inches |
| Control Type | Toggle Switch, Max. 15 Amps, Chef's Left |
| Control Options | Built-In Infinite Control, Max. 12.2 AmpsRemote Infinite or Toggle SwitchesRemote BoxInfinite Not Available at 120V |
| Housing | Stainless Steel |
| Mounting | Four Stainless Steel Shelf Mounting Tabs |
| Features | Non-Blackening ReflectorReinforced Wire GuardHeavy-Duty Insulation |
| Minimum Clearances | Combustibles: 13.5 in. to Surface Below3 in. to Back Wall1 in. Below Overshelf |
| Factory Options | Extended Leads 1 to 20 ft.Indicator Light, Remote OnlyTubular StandsC-Leg and T-Leg StandsS Hooks and Chain |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is later24/7 parts and service assistance in US and Canada |
| Element Coverage | Metal-sheathed food warmer elements: 1 year parts and labor plus 1 additional year parts only |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
