Hatco HCSBFX-24-I Remote Hot/Cold Built-In Flush Top Shelf, Shelf Only, 24" x 19-1/2" Hardcoat Surface, 120V
One built-in shelf that holds hot food at lunch and cold food at dinner, switching modes in as little as 30 minutes.
The Hatco HCSBFX-24-I is a top-mount built-in hot/cold shelf with a 24" x 19-1/2" hardcoat aluminum surface, with a remote control box; the condensing unit is supplied by others. A rope-style heating element under the surface handles HOT mode and a copper evaporator coil handles COLD mode, and the shelf changes from one to the other in as little as 30 minutes. A patented thermal break cuts condensation and heat transfer to the counter around it. It must be connected to a condensing unit supplied by others; the liquid line solenoid valve comes attached to the shelf.
Have the electrician and refrigeration installer confirm the layout before the shelf arrives: the shelf, control box and refrigeration by others are connected on site.
Switch between HOT and COLD mode from the control box; the shelf changes over in as little as 30 minutes.
The HOT controller sets from 65°F to 192°F (factory 180°F) and the COLD controller from 10°F to 50°F (factory 25°F).
Reduces condensation and temperature transfer onto the countertop around the shelf.
The food-safe hardcoat aluminum top gives a 24" x 19-1/2" heated and cooled area, flush with the counter.
With no condensing unit of its own, the shelf can be cooled from a remote system using other refrigerants.
Hatco says the shelf changes modes in as little as 30 minutes, and the manual says to allow about 30 minutes to reach setpoint before loading.
No. Hatco says food must be wrapped, boxed or on a food pan, not placed directly on the hardcoat surface.
HOT mode sets from 65°F to 192°F and comes set at 180°F. COLD mode sets from 10°F to 50°F and comes set at 25°F. An auto-defrost cycle can be turned on in COLD mode.
A condensing unit supplied by others, sized for the 1,019 BTU/hr evaporator load Hatco lists for this model. The shelf comes with a TXV valve and an attached 120V liquid line solenoid valve.
120V, 60 Hz. Hatco rates the shelf at 445 W and 3.7 A. Site power is wired to the control box by a qualified electrician.
Hatco covers it under its limited warranty. Register the unit online within 90 days of factory shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HCSBFX-24-I |
| Series | HCSBFX Remote Hot/Cold Built-In Flush Top Shelves |
| Shipping Weight | 84 lb. |
| Width | 25-1/2 Inches |
| Depth | 21 Inches |
| Height | 7.29 Inches |
| Usable Shelf Space | 24 x 19-1/2 Inches |
| Countertop Cutout | 24-5/8 to 25 Inches Wide x 20-1/8 to 20-1/2 Inches Deep |
| Control Box | 13.94 W x 6.63 H x 5.43 D InchesCutout 13-1/8 x 5-5/8 Inches |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 3.7 Amps |
| Hot Side Watts | 445 Watts |
| Condensing Unit | Supplied by Others |
| Evaporator Load | 1,019 BTU/hr |
| Included Valves | TXV Valve, Shipped LooseLiquid Line Solenoid Valve, 120V 12 W, Attached to Shelf |
| Temperature Range | Hot 65 to 192°FCold 10 to 50°F |
| Mode Change Time | As Little as 30 Minutes |
| Control Type | Remote Control Box3-Position Power SwitchTwo Digital Temperature Controllers |
| Surface | Food-Safe Hardcoat Aluminum |
| Housing | Insulated Stainless Steel and Aluminized Steel |
| Mounting | Built-In, Top Mount, Flush |
| Ambient Temperature | 65 to 86°F |
| Certifications | cULus, NSF Component |
| Country of Origin | Made in USA |
| Warranty | Hatco Limited Warranty |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
