Hatco HWBL-FULD Built-In Full-Size Uninsulated Heated Well with Drain, Low Watt 750W, 120V
Description
A low-watt full-size heated well that holds hot food at safe serving temperatures in your serving counter.
The Hatco HWBL-FULD is a built-in full-size heated well, uninsulated. It holds one full-size 12" x 20" pan, or half- and third-size pans with adapter bars. This low-watt version runs on 120V at 750 W and 6.3 A. It comes with a remote compact thermostatic control box with a lighted ON/OFF rocker switch and temperature dial and a 36" flexible conduit. A 3/4" NPT drain with a flat drain screen makes emptying and cleaning easy.
Will it fit · Will it hook up
- Outside size
- 13.68" W x 21.76" D x 9.32" H
- Counter cutout
- Non-combustible counter: 12.625" to 12.94" W x 20.625" to 20.94" D; combustible counter: 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit
- Mounting
- Top or bottom mount; EZ locking hardware for top mounting
- Power
- 120V single phase, 750 W, 6.3 A; hardwired, optional cord with NEMA 5-15P plug
- Control box
- Mount the remote control box vertically, at least 6" and no more than 72" from the well
- Drain
- 3/4" NPT drain fitting; connect to a drain valve and the site drain line
Leave at least 3-1/2" from the bottom of the well to any combustible surface, and allow extra room below the counter for the drain.
Thermostatic heat
The thermostat reads the actual well temperature and adds heat only when needed.
Larger flat-screen drain
The 3/4" NPT drain is 50% larger, and its flat screen keeps pans level and simplifies cleaning.
Wet or dry use
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Heavy stainless build
Thicker stainless steel with solid brazed joints, and easy service access to elements and thermostats.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Units are voltage-specific: check the specification label before installation.
- A qualified electrician should connect power and a qualified plumber should connect the drain; installation must meet local electrical and plumbing codes.
- Install indoors where room air is at least 70°F, in or on a counter rated for prolonged temperatures up to 200°F; Hatco recommends metal countertops.
- Pans, lids, adapter bars and adapter tops are sold separately.
Questions buyers ask
What countertop cutout do I need?
Non-combustible counter: 12.625" to 12.94" W x 20.625" to 20.94" D. Combustible counter: 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit.
What power does it need?
120V single phase, 750 W, 6.3 A. It is hardwired as standard; an optional cord with a NEMA 5-15P plug is available.
What pans fit?
One full-size pan; two 1/2-size or three 1/3-size pans with adapter bars; two 7-quart or three 4-quart round pans with an adapter top. Pans and adapters are sold separately.
Can I run it wet or dry?
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
What warranty does it have?
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBL-FULD |
| Series | Built-In Full-Size Uninsulated Heated Wells |
| Type | Built-In Full-Size Uninsulated Heated Well |
| Wattage Class | Low Watt |
| Shipping Weight | 22 lb. |
| Width | 13.68 Inches |
| Depth | 21.76 Inches |
| Height | 9.32 Inches |
| Countertop Cutout, Non-Combustible | 12.625" to 12.94" W x 20.625" to 20.94" D |
| Countertop Cutout, Combustible | 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit |
| Capacity | One Full-Size 12" x 20" Pan |
| Pan Configurations | One Full-Size 12" x 20" PanTwo 1/2-Size or Three 1/3-Size Pans with Adapter BarsTwo 7 Qt. or Three 4 Qt. Round Pans with Adapter Top |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 750 Watts |
| Amps | 6.3 Amps |
| Plug Type | Hardwired |
| Connection | Hardwired StandardOptional Cord with NEMA 5-15P Plug36" Flexible Conduit between Control and Well, 72" Optional |
| Control Type | Remote Compact Thermostatic Control with BezelLighted ON/OFF Rocker Switch and Temperature Dial |
| Mounting | Top or Bottom MountEZ Locking Hardware |
| Drain | 3/4" NPT Drain FittingFlat Drain Screen |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | UninsulatedStainless and Aluminized Steel HousingMetal-Sheathed Heating ElementSolid Brazed Joints |
| Pan Corners | Round Corners StandardSquare Corners Optional |
| Factory Options | Extra High-Temp Lead Wire per Foot72" ConduitCord with NEMA 5-15P PlugThermostat with 6' CapillaryWM Assembly or Larger Recessed ControlDesigner Color BezelSquare Pan Corners |
| Accessories | Stainless Steel Food PansWire TrivetsAdapter for Round PansSupport BarsMounting Kit for Combustible Countertops3/4" Ball or Gate ValveRemote Drain Handle |
| Certifications | cULus, UL EPH ANSI/NSF 4 |
| Listing Detail | Agency Choice at Order: UL, C-UL or UL-EPH Sanitary Listing |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

