Hatco HWBLIRT-FUL Built-In Full-Size Insulated Heated Well, Fabricator Component, Thermostat, Low Watt 750W, 120V
Description
A full-size heated well component that lets a fabricator build hot food holding into a custom steam table or serving counter.
The Hatco HWBLIRT-FUL is a built-in full-size heated well, insulated on the sides and bottom, built as a UR and C-UR recognized fabricator component. It holds one full-size 12" x 20" pan, or half- and third-size pans with adapter bars. This low-watt version runs on 120V at 750 W and 6.3 A. It comes with a thermostat control with a lit ON/OFF rocker switch on a 36" capillary, but without conduit or a control box enclosure; the fabricator wires it and must obtain UL approvals for the finished unit.
Will it fit · Will it hook up
- Outside size
- 13.68" W x 21.76" D x 10.26" H
- Counter cutout
- Non-combustible counter: 12.75" to 12.94" W x 20.75" to 20.94" D; combustible counter: 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit
- Mounting
- Top or bottom mount; EZ locking hardware for top mounting
- Power
- 120V single phase, 750 W, 6.3 A; hardwired by the fabricator
- Control panel cutout
- 2.125" W x 3.375" H for the thermostat control
Leave at least 3-1/2" from the bottom of the well to any combustible surface.
Thermostat control
A thermostat control with a lit ON/OFF rocker switch comes on a 36" capillary, ready to mount in your counter panel.
Insulated well
The insulated well conserves energy and keeps heating temperatures more consistent.
Built for fabricators
Ships without conduit or control box enclosure, so the control can be laid out in your own steam table.
Wet or dry use
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Sturdy housing
Stainless and aluminized steel housing with a metal-sheathed heating element.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Units are voltage-specific: check the specification label before installation.
- A qualified electrician should connect power; installation must meet local electrical codes.
- Install indoors where room air is at least 70°F, in or on a counter rated for prolonged temperatures up to 200°F; Hatco recommends metal countertops.
- This is a UR fabricator component: conduit and control enclosures are not included, and the fabricator must obtain UL approvals.
- Pans, lids, adapter bars and adapter tops are sold separately.
Questions buyers ask
What countertop cutout do I need?
Non-combustible counter: 12.75" to 12.94" W x 20.75" to 20.94" D. Combustible counter: 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit.
What power does it need?
120V single phase, 750 W, 6.3 A. The fabricator wires it.
What does UR fabricator component mean?
The well uses UL recognized (UR and C-UR) components and ships without conduit or a control box enclosure. The fabricator installs it in a steam table and must obtain UL approvals.
What is the difference between RT and RN?
RT means thermostat control with a lit rocker switch and 36" capillary. RN means infinite switch control with a pilot light and 36" leads.
What pans fit?
One full-size pan; two 1/2-size or three 1/3-size pans with adapter bars; two 7-quart or three 4-quart round pans with an adapter top. Pans and adapters are sold separately.
Can I run it wet or dry?
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
What warranty does it have?
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBLIRT-FUL |
| Series | Built-In Full-Size Insulated UR Components |
| Type | Built-In Full-Size Insulated Heated Well, UR Fabricator Component |
| Wattage Class | Low Watt |
| Shipping Weight | 27 lb. |
| Width | 13.68 Inches |
| Depth | 21.76 Inches |
| Height | 10.26 Inches |
| Countertop Cutout, Non-Combustible | 12.75" to 12.94" W x 20.75" to 20.94" D |
| Countertop Cutout, Combustible | 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit |
| Control Panel Cutout | 2.125" W x 3.375" H |
| Capacity | One Full-Size 12" x 20" Pan |
| Pan Configurations | One Full-Size 12" x 20" PanTwo 1/2-Size or Three 1/3-Size Pans with Adapter BarsTwo 7 Qt. or Three 4 Qt. Round Pans with Adapter Top |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 750 Watts |
| Amps | 6.3 Amps |
| Plug Type | Hardwired |
| Connection | Wired by the FabricatorNo Conduit or Control Box Enclosure Included |
| Control Type | Thermostat Control with Lit ON/OFF Rocker Switch36" Capillary |
| Mounting | Top or Bottom MountEZ Locking Hardware |
| Drain | No Drain |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | Insulated Sides and BottomStainless and Aluminized Steel HousingMetal-Sheathed Heating Element |
| Pan Corners | Round Corners StandardSquare Corners Optional |
| Factory Options | Thermostat with 6' Capillary for RT ComponentsSquare Pan Corners |
| Accessories | Stainless Steel Food PansWire TrivetsAdapter for Round PansSupport BarsMounting Kit for Combustible Countertops |
| Certifications | cURus |
| Listing Detail | UR and C-UR Recognized ComponentsConduit and Control Enclosures Not IncludedFabricator Must Obtain UL Approvals |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

