Hatco HWBLRN-FULD Built-In Full-Size Uninsulated Heated Well with Drain, Fabricator Component, Infinite Control, Low Watt 750W, 120V
A full-size heated well component that lets a fabricator build hot food holding into a custom steam table or serving counter.
The Hatco HWBLRN-FULD is a built-in full-size heated well, uninsulated, built as a UR and C-UR recognized fabricator component. It holds one full-size 12" x 20" pan, or half- and third-size pans with adapter bars. This low-watt version runs on 120V at 750 W and 6.3 A. It comes with an infinite switch control with a pilot light on 36" leads, but without conduit or a control box enclosure; the fabricator wires it and must obtain UL approvals for the finished unit. A 3/4" NPT drain with a flat drain screen makes emptying and cleaning easy.
Leave at least 3-1/2" from the bottom of the well to any combustible surface, and allow extra room below the counter for the drain.
An infinite switch control with a pilot light comes on 36" leads, ready to mount in your counter panel.
The 3/4" NPT drain is 50% larger, and its flat screen keeps pans level and simplifies cleaning.
Ships without conduit or control box enclosure, so the control can be laid out in your own steam table.
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Thicker stainless steel with solid brazed joints, and easy service access to elements and thermostats.
Non-combustible counter: 12.625" to 12.94" W x 20.625" to 20.94" D. Combustible counter: 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit.
120V single phase, 750 W, 6.3 A. The fabricator wires it.
The well uses UL recognized (UR and C-UR) components and ships without conduit or a control box enclosure. The fabricator installs it in a steam table and must obtain UL approvals.
RT means thermostat control with a lit rocker switch and 36" capillary. RN means infinite switch control with a pilot light and 36" leads.
One full-size pan; two 1/2-size or three 1/3-size pans with adapter bars; two 7-quart or three 4-quart round pans with an adapter top. Pans and adapters are sold separately.
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBLRN-FULD |
| Series | Built-In Full-Size Uninsulated UR Components |
| Type | Built-In Full-Size Uninsulated Heated Well, UR Fabricator Component |
| Wattage Class | Low Watt |
| Shipping Weight | 20 lb. |
| Width | 13.68 Inches |
| Depth | 21.76 Inches |
| Height | 9.32 Inches |
| Countertop Cutout, Non-Combustible | 12.625" to 12.94" W x 20.625" to 20.94" D |
| Countertop Cutout, Combustible | 14" to 14.25" W x 22" to 22.25" D with the accessory mounting kit |
| Control Panel Cutout | 2.125" W x 3.375" H |
| Capacity | One Full-Size 12" x 20" Pan |
| Pan Configurations | One Full-Size 12" x 20" PanTwo 1/2-Size or Three 1/3-Size Pans with Adapter BarsTwo 7 Qt. or Three 4 Qt. Round Pans with Adapter Top |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 750 Watts |
| Amps | 6.3 Amps |
| Plug Type | Hardwired |
| Connection | Wired by the FabricatorNo Conduit or Control Box Enclosure Included |
| Control Type | Infinite Switch Control with Pilot Light36" Leads |
| Mounting | Top or Bottom MountEZ Locking Hardware |
| Drain | 3/4" NPT Drain FittingFlat Drain Screen |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | UninsulatedStainless and Aluminized Steel HousingMetal-Sheathed Heating ElementSolid Brazed Joints |
| Pan Corners | Round Corners StandardSquare Corners Optional |
| Factory Options | Additional Power Supply Lead Wire in 1' Increments for RN ComponentsSquare Pan Corners |
| Accessories | Stainless Steel Food PansWire TrivetsAdapter for Round PansSupport BarsMounting Kit for Combustible Countertops3/4" Ball or Gate ValveRemote Drain Handle |
| Certifications | cURus |
| Listing Detail | UR and C-UR Recognized ComponentsConduit and Control Enclosures Not IncludedFabricator Must Obtain UL Approvals |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
