

Inoksan Commercial Gyro Machines & Vertical Broilers
Shop Inoksan gyro machines and vertical broilers for gyros, doner, shawarma and tacos al pastor: compact PDG100 gas models with 2 to 5 double burners, 6 to 10 burner PDG300 to PDG500 gas models with mesh or Robax glass shields, and PDE electric models. We also stock extra skewer sets matched to each model and genuine Inoksan parts. Inoksan builds kitchen equipment in Bursa, Turkey. Call 201-467-8222 for help sizing a machine or for a quote.
- US warranty by modelconfirmed with your quote
- Specialist201-467-8222
- Showroomin Kearny, NJ
Shop Inoksan by category
Inoksan gyro machines: lines, warranty and how to choose
- Which Inoksan fits
- Warranty
- Model numbers
- Who makes Inoksan
- Gas or electric
- Sizing
- Skewers & parts
- Is Inoksan good?
- Buying from Atlantic
- FAQ
Which Inoksan line fits your business?
We carry Inoksan for one job: vertical broilers for gyros, doner, shawarma and tacos al pastor, with the skewers and parts that keep them running. Start with your fuel, then size the machine to your busiest day:
| Line | Best for | Model prefixes |
|---|---|---|
| PDG gas gyro machines | Gyro, doner and shawarma shops with a gas line | PDG102–PDG115, PDG300–PDG500 |
| PDE electric gyro machines | Kitchens with 208V three-phase power and no gas | PDE303N, PDE403N, PDE503N |
| Skewers & accessories | A second skewer, spare meat bases, holders, knife | 2500…, SH-… |
| Replacement parts | Motors, gas valves, igniters, glass and mesh | 11…, 24… |
Inoksan warranty
Inoksan's published warranty policy gives its devices a two-year warranty covering parts, labor and manufacturing defects, as long as the unit is used as the user manual shows and only Inoksan authorized technical service works on it. The same policy states that this warranty is valid only within the borders of Turkey.
| Where | What applies |
|---|---|
| Inoksan equipment sold in Turkey | 2 years, parts and labor, through Inoksan authorized service (Inoksan Warranty Policy) |
| Inoksan gyro machines bought in the US | Varies by model; we confirm the terms in writing with your quote |
| Skewers, accessories and replacement parts | Ask us before you order |
- Inoksan's policy excludes damage from misuse, from loading and transport after delivery, from gas, water, drain or steam hookups that don't follow the manual, and from low or high voltage, ungrounded or faulty wiring.
- Non-original parts or repairs by unauthorized people void Inoksan's warranty, so use genuine Inoksan parts.
- Have a licensed installer connect gas models to the right gas type and regulator, and electric PDE models to a 208V three-phase circuit.
Sources: Inoksan Warranty Policy and Call Center pages, inoksan.com (checked October 28, 2026). Call 201-467-8222 for the US terms on a specific model.
How to read an Inoksan gyro machine model number
PDG500NR-NATPDG = gas gyro machine · 500 = 10-burner size · NR = Robax glass shield (NM = wire mesh) · NAT = natural gas (LP = liquid propane)
| Example | What it means |
|---|---|
| PDE403N | PDE = electric gyro machine, 12 burners, Robax glass, 208V three-phase burners |
| PDG102MN to PDG105MN | Compact gas models with a top motor; the last digit is the number of double burners (2 to 5) |
| PDG112MN to PDG115MN | The same sizes with a bottom motor (18.7" wide instead of 16.6") |
| PDG300NM / PDG300NR | 6 burners, bottom motor; NM = wire mesh shield, NR = Robax glass shield (400 = 8 burners, 500 = 10 burners) |
| PDG114M-NAT | 4 double burners, mesh shield, natural gas |
| 2500 0400 | Extra skewer set for the PDG400NR, PDG400NM and PDE403 |
| 2402 0840 / 2402 0841 | Robax glass / wire mesh shield for 4 levels |
Read from the Inoksan USA spec sheets and our product titles. Parts numbers are Inoksan part codes; match them to the model plate on your machine.
Who makes Inoksan?
Inoksan is a Turkish maker of commercial kitchen equipment based in Bursa. According to the company, it started in 1980 in a small workshop and now produces in a factory with 20,000 m² of indoor area at Işıktepe Organized Industrial Zone, Nilüfer, Bursa. Inoksan says it exports about 35 percent of its production to five continents, and it lists the opening of its America dealer in 2014.
In Turkey, Inoksan makes ovens, cooking lines, dishwashers, refrigeration and laundry equipment. In the US, we carry its doner and gyro machines, called "doner kebap machines" on its own site.
Inoksan lists TSE certification for some products, TS EN ISO 9001 and BS EN ISO 9001 quality management certificates, CE marking for Europe and GOST R certificates for Russia. Its milestones page says it moved to ISO 9001:2015 and ISO 14001:2015 in 2017. These are not US listings: check the spec sheet of the model you choose, or ask us, for US gas and electrical approvals and what your local inspector will need.
Sources: inoksan.com About us, Milestones, Quality Documents and Contact pages (checked October 28, 2026).
Gas or electric: which Inoksan gyro machine?
Choose gas (PDG) if you have a gas line. Every PDG model needs a 1/2" gas inlet and a standard 120V outlet for the motor, which draws 1 A. Order the model for your gas: titles say natural gas (NAT) or LP. Gas models range from 20,472 BTU on the 2-double-burner PDG102MN to 78,000 BTU on the 10-burner PDG500.
Choose electric (PDE) when gas isn't available or allowed, for example in some food courts and stadium stands. The PDE303N, PDE403N and PDE503N burners are hard-wired to 208V three-phase at 17, 23 and 29 A, with a separate 120V motor. Have an electrician confirm your panel before you order.
Mesh or glass: NM and MN models use a wire mesh heat shield. NR and PDE models use Robax glass, a glass-ceramic shield that lets customers see the cone cooking. Both are sold as replacement parts in 3, 4 and 5 level sizes.
What size gyro machine do you need?
Size the machine to the biggest cone you will load on a busy day, and the space you have. Meat capacities below come from the Inoksan USA spec sheets.
| Burners | Models | Meat capacity | Width |
|---|---|---|---|
| 2 double | PDG102MN | 99 lb. | 16.6" |
| 3 double | PDG103MN, PDG113M | 132 lb. | 16.6" / 18.7" |
| 4 double | PDG104MN, PDG114M, PDG114MN | 165 lb. | 16.6" / 18.7" |
| 5 double | PDG115M | 212 lb. | 18.7" |
| 6 gas / 9 electric | PDG300NM, PDG300NR, PDE303N | 132 lb. | 24.8" / 23.6" |
| 8 gas / 12 electric | PDG400NM, PDG400NR, PDE403N | 165 lb. | 24.8" / 23.6" |
| 10 gas / 15 electric | PDG500NM, PDG500NR, PDE503N | 198 lb. | 24.8" / 23.6" |
Compact PDG100 models fit a narrow counter. The wider PDG300 to PDG500 and PDE models have a back burner body that moves forward and back to cook faster or slower, and a drain valve for grease. On every model the skewer tilts toward or away from the burners, the motor can turn either way and keeps turning while you slice, and the meat base slides to fit small or large cones.
Sources: Inoksan USA spec sheets for PDG102MN–PDG115MN, PDG300/400/500 NM and NR, PDE403N and PDE503N; PDE303N from our product page (checked October 28, 2026).
Extra skewers and genuine Inoksan parts
Many shops keep a second skewer so a fresh cone can be built and chilled while the first one cooks. Inoksan skewer sets come with a skewer, a large and a small meat base and clips, and each set is made for specific models: 2500 0102 to 2500 0115 for the PDG100 models, and 2500 0300, 0400 and 0500 for the PDG300 to PDG500 and the matching PDE models.
We also stock the parts that wear or break most: igniters, thermocouples, gas taps and valves, regulators, motor switches and complete top and bottom motor mechanisms, plus the glass and mesh shields. Inoksan's warranty policy says non-original parts void its warranty, so replace like with like.
Is Inoksan a good gyro machine?
Inoksan comes from Turkey, where doner is an everyday dish, and the company has built kitchen equipment since 1980. Its gyro machines are made for long daily use: an insulated motor that keeps grease and water out, burners you can move and a tilting skewer to control the cook, and shields on both sides to hold heat. Spare skewers and parts are stocked here in the US.
The trade-offs: Inoksan's published two-year warranty covers Turkey only, so get the US terms with your quote, and US approvals vary by model, so check them against your inspector's requirements. Electric models need 208V three-phase power, which many small shops don't have.
Buying Inoksan from Atlantic
- Freight is quoted at checkout; delivery is free within 50 miles of our Kearny, NJ warehouse. See our shipping policy.
- See equipment at our 50,000 sq. ft. showroom and warehouse in Kearny, NJ.
- Financing up to $50K for single units or a full kitchen.
- Send an equipment list for a project quote, or call a specialist at 201-467-8222, Monday to Saturday, 8 AM to 5 PM ET.
Inoksan FAQ
Where is Inoksan made?
Inoksan is a Turkish manufacturer based in Bursa, Turkey. According to the company, it was founded in 1980 and produces in a factory with 20,000 m² of indoor area in the Işıktepe Organized Industrial Zone in Nilüfer, Bursa, and exports about 35 percent of its production. Its gyro machines are sold in the US with Inoksan USA spec sheets.
What warranty does an Inoksan gyro machine have?
Inoksan's own warranty policy gives two years of parts and labor through its authorized service, but states that it is valid only within Turkey. For a gyro machine bought in the US, the terms vary by model, and we confirm them in writing with your quote. Call 201-467-8222 before you order.
How much meat does an Inoksan gyro machine hold?
According to the Inoksan USA spec sheets, meat capacity runs from 99 lb. on the 2-double-burner PDG102MN to 212 lb. on the 5-double-burner PDG115M. The 6, 8 and 10 burner PDG300, PDG400 and PDG500 hold 132, 165 and 198 lb., the same as the electric PDE303N, PDE403N and PDE503N.
Do Inoksan gas gyro machines come in propane?
Yes. Most PDG models are listed in both natural gas (NAT) and liquid propane (LP) versions, so order the one that matches your supply. Each needs a 1/2" gas inlet and a 120V outlet for the motor. We also stock a natural gas regulator and an LP hose with regulator as parts.
What power does an electric Inoksan gyro machine need?
The PDE303N, PDE403N and PDE503N burners are hard-wired to 208V three-phase power at 17, 23 and 29 A, according to their spec sheets, while the motor plugs into 120V. Have an electrician confirm three-phase service before you order. If you only have single-phase power, a gas PDG model is usually the easier fit.
What is the difference between Inoksan NM and NR models?
Both are bottom-motor PDG300, PDG400 and PDG500 gas machines with the same burners and capacity. NM models have a wire mesh heat shield; NR models have a Robax glass-ceramic shield that lets customers see the cone. Replacement glass and mesh shields are sold for 3, 4 and 5 levels.
Can I buy Inoksan gyro machine parts and extra skewers?
Yes. We stock extra skewer sets matched to each PDG and PDE model, meat bases, clips, skewer holders, a gyro knife, and parts such as igniters, thermocouples, gas valves, regulators, motor switches, top and bottom motors and Robax glass. Give us your model number and we will match the part.
How much is shipping on Inoksan equipment?
Freight on Inoksan equipment is quoted per order, and delivery is free within 50 miles of our warehouse in Kearny, NJ. Call 201-467-8222 for a delivered price before you order.
Manufacturer facts on this page link to their source. Specifications can change, so confirm details on each model's spec sheet or call us at 201-467-8222.

























