Nemco 55800 Easy Tuna Press, Sink-Mount Can Strainer for One 64 oz. Foodservice Can, NSF

Nemco 55800 Easy Tuna Press, Sink-Mount Can Strainer for One 64 oz. Foodservice Can, NSF

NemcoSKU: NEM-55800

Price:
Regular price$595.65
  • Warranty · Limited Lifetime · Parts Only

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit

Outside (W × D × H)6" × 12" × 22"
CapacityOne 64 oz. Foodservice Can
Shipping weight12 lb.
ListedNSF

Highlights

  • Presses the water out of one 64 oz. foodservice tuna can in under 3 minutes
  • Hangs on the side of most food prep sinks; lifts off for cleaning and storage
  • Cast aluminum body with a stainless steel handle and suction cups
  • 6" W x 12" D x 22" H, 9 lb.; 12 lb. shipping weight
  • NSF; Nemco limited lifetime warranty, parts only

Specifications

ManufacturerNemco
Model Number55800
TypeSink-Mount Tuna Press and Can Strainer
Unit Weight9 lb.
Shipping Weight12 lb.
Width6"
Depth12"
Height22"
Shipping Carton13-1/2" x 7" x 21"
CapacityOne 64 oz. Foodservice Can
Drain TimeUnder 3 Minutes per Can
MaterialCast Aluminum Body, Stainless Steel Handle, Suction Cups
Power TypeManual
Replacement PartsDrive Shoe Set 55572, Suction Cup 45472, Each
CertificationsNSF
WarrantyLimited Lifetime, Parts Only
Warranty TermsCovers structural and mechanical parts for the original user, Blades Not Covered, Bushings and Bearings 2 Years

Resources & Documents

Specs

Manufacturer Nemco
Model Number 55800
Type Sink-Mount Tuna Press and Can Strainer
Unit Weight 9 lb.
Shipping Weight 12 lb.
Width 6 Inches
Depth 12 Inches
Height 22 Inches
Shipping Carton 13-1/2" x 7" x 21"
Capacity One 64 oz. Foodservice Can
Drain Time Under 3 Minutes per Can
Material Cast Aluminum BodyStainless Steel HandleSuction Cups
Power Type Manual
Replacement Parts Drive Shoe Set 55572Suction Cup 45472, Each
Certifications NSF
Warranty Limited Lifetime, Parts Only
Warranty Terms Covers structural and mechanical parts for the original userBlades Not CoveredBushings and Bearings 2 Years

Certifications

NSF
Call

Description

A sink-side press that squeezes the extra water out of a 64-ounce can of tuna in under 3 minutes.

Nemco 55800 Easy Tuna Press, front view

The Nemco 55800 Easy Tuna Press removes excess water from canned tuna so sandwiches and salads stay fresher, without soggy bread or lettuce. Hang it on the side of a food prep sink, invert the opened can with its lid in place onto the base, and turn the crank until snug. The press face fits a standard 64 oz. foodservice can and spreads the force evenly for uniform water removal.

Will it fit

Size
6" W x 12" D x 22" H; 9 lb.
Mounting
Hangs on the side of most food preparation sinks; lifts off for cleaning or storage
Can size
One 64 oz. foodservice can
Power
Manual; no power needed

Fits a 64 oz. can

The press face matches the surface of a standard 64 oz. foodservice tuna can and presses evenly for uniform water removal.

Under 3 minutes

Nemco says it drains the water from a 64 oz. can in less than 3 minutes with a few turns of the crank.

Drill-press action

The stainless steel handle takes little effort and multiplies it into heavy pressure on the tuna.

Hangs on the sink

It hangs on the side of the sink so the water drains away. Suction cups steady it in use and it lifts off easily afterward.

Cast aluminum body

A cast aluminum body and stainless steel parts stand up to daily commercial use.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Check that your prep sink edge can take the hanging bracket before first use.

Questions buyers ask

How does it work?

Hang the press on the side of the sink, open the can and pour off the water, keep the lid in place and turn the can face down on the press base, then turn the crank until snug.

What can size does it take?

One standard 64 oz. foodservice can at a time.

Will it fit my sink?

Nemco says it is designed to attach to most food preparation sinks. It is 6" W x 12" D x 22" H.

What parts can be replaced?

Nemco lists a drive shoe set, part 55572, and suction cups, part 45472, sold each.

What warranty does it have?

Nemco gives its food preparation products a limited lifetime warranty on structural and mechanical parts for the original user, parts only. Blades are not covered, and bushings and bearings are covered for 2 years.

64 oz. CanStandard foodservice size.
Under 3 MinutesWater drained per can.
NSFNSF mark on the Nemco sheet.
Lifetime WarrantyLimited, parts only; blades excluded.

Specs

Manufacturer Nemco
Model Number 55800
Type Sink-Mount Tuna Press and Can Strainer
Unit Weight 9 lb.
Shipping Weight 12 lb.
Width 6 Inches
Depth 12 Inches
Height 22 Inches
Shipping Carton 13-1/2" x 7" x 21"
Capacity One 64 oz. Foodservice Can
Drain Time Under 3 Minutes per Can
Material Cast Aluminum BodyStainless Steel HandleSuction Cups
Power Type Manual
Replacement Parts Drive Shoe Set 55572Suction Cup 45472, Each
Certifications NSF
Warranty Limited Lifetime, Parts Only
Warranty Terms Covers structural and mechanical parts for the original userBlades Not CoveredBushings and Bearings 2 Years

Certifications

NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed