KoolMore SC121610-12B3 60" 3-Compartment Sink with Two 12" Drainboards, 12" x 16" x 10" Bowls, 18-Gauge 304 Stainless Steel, NSF
Description
A 60" three-compartment stainless steel sink for wash, rinse and sanitize with drainboard space to load and dry.
For restaurants, cafés, bars and other commercial kitchens that need a 3-compartment sink. The SC121610-12B3 has three 12" x 16" x 10" bowls, left and right drainboards and a 9.7" backsplash, built from 18-gauge stainless steel and NSF certified. Add your own faucet and drain pipe.
Will it fit
- Outside size
- 60" W x 22" D x 43.2" H to the top of the backsplash
- Bowls
- 3 x 12" x 16" x 10" (side to side x front to back x deep)
- Drainboards
- 12" left and 12" right
- Working height
- 36" from the floor (Koolmore drawing); feet adjust for level
- Faucet
- Not included. 2 holes, 1.2" diameter, on 8" centers in the backsplash; fits an 8" center wall-mount faucet
- Drain
- Basket strainer in each bowl, 3.5" opening; 1.24" drain line connection; the drain pipe and plumbing are not included
- Weight
- 54.6 lbs.
Measure the wall: the sink needs 60" of run and 22" front to back. Check local health code for how many compartments and drainboards your dishwashing setup needs.
Three bowls 10" deep
3 x 12" x 16" x 10" bowls for the wash, rinse and sanitize steps of manual dishwashing.
Room to load and dry
Left and right drainboards slope back toward the bowls at 6 degrees, so water runs into the sink, not onto the floor.
Splash protection
A 9.7" backsplash keeps the wall behind the sink dry.
18-gauge stainless steel
304 stainless steel body on 4 legs with adjustable bullet feet for uneven floors.
NSF certified
Listed by NSF for sanitation, as health inspectors expect in commercial kitchens.
Delivery and setup
- Ships by freight carrier. See our shipping policy for delivery options and timing.
- Arrives with the legs off: turn the sink upside down on the carton, insert the 4 legs, tighten the set screws, then stand it up and level it with the feet.
- Faucet and drain pipe are not included; plumbing should be done by a qualified professional.
- Inspect the carton and the sink for damage before signing for the delivery, and note any damage on the receipt.
Questions buyers ask
Can I use it for wash, rinse and sanitize?
Yes. Three compartments let you wash, rinse and sanitize in separate bowls. Check your local health code for its exact dishwashing rules.
Is a faucet included?
No. Buy the faucet separately. The backsplash has 2 holes on 8" centers, and Koolmore says it fits an 8" center wall-mount commercial faucet with a gooseneck or swing spout.
What drain does it come with?
A basket strainer for each bowl fits the 3.5" drain opening. Koolmore lists a 1.24" drain line connection. The drain pipe is not included; connect it to your plumbing with a pipe joint.
How big are the bowls?
Each bowl is 12" side to side, 16" front to back and 10" deep.
How tall is it?
43.2" to the top of the backsplash, with a 36" working height per Koolmore's drawing. The bullet feet adjust to level it.
Is it NSF certified?
Yes. The NSF mark is on Koolmore's spec sheet for this model.
What does the warranty cover?
Koolmore lists a 1-year parts and labor warranty for the original buyer in the US. It does not cover damage in transit or from improper installation.
Specs
| Manufacturer | KoolMore |
|---|---|
| Model Number | SC121610-12B3 |
| Quantity | 1 Each |
| Width | 60 Inches |
| Depth | 22 Inches |
| Height | 43.2 Inches |
| Working Height | 36 Inches (Drawing) |
| Height from Floor to Bottom of Bowl | 23.5 Inches |
| Weight | 54.6 lbs. |
| Number of Compartments | 3 |
| Bowl Size | 12" x 16" x 10" (Side to Side x Front to Back x Deep) |
| Drainboards | Left 12 InchesRight 12 Inches |
| Drainboard Slope | 6 Degrees |
| Bowl Floor Slope | 2 Degrees |
| Backsplash Height | 9.7 Inches |
| Faucet Holes | 2, 1.2 Inch Diameter, 8 Inch Centers |
| Faucet | Not Included |
| Drain | Basket Strainer per Bowl, 3.5 Inch Opening, IncludedDrain Pipe Not Included1.24 Inch Drain Line Connection |
| Material | 304 Stainless Steel, 18 Gauge |
| Legs | 4, 22.16 InchesAdjustable Plastic Bullet Feet |
| Certifications | NSF |
| Warranty | 1 Year Parts and Labor |
| Usage | Commercial Indoor |
| Country of Origin | China |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

