Southbend 20060SB Platinum 60" Self-Contained Refrigerated Chef Base, 2 Drawers, 10 cu. ft., 120V, R-404A

SouthbendSKU: SBE-20060SB

Price:
Regular price$15,281.00

Quick Shipping

Usually ships in 2–5 business days

Product Overview

  • 2 self-closing 31" drawers hold 4 pans, 12" x 20" x 4" (pans not included)
  • 10 cu. ft. cooled volume, 1,802 BTU/H cooling capacity, 1/4 HP compressor, R-404A
  • 60" W x 32.5" D x 26" H on 6" adjustable legs, sized to sit under a range top
  • Carries Southbend modular sectional range tops mounted with an insulated base adapter
  • 120V single phase, 8 amps (compressor), 6' cord with grounded plug
  • 304 stainless steel #3 top, front, sides, back, drawers and interior; coved corners
  • UL and NSF listed, made in USA; 1-year parts and labor warranty

Resources & Documents

Specs

Manufacturer Southbend
Model Number 20060SB
Series Platinum Series Refrigerated Base (Self-Contained)
Quantity 1 Each
Shipping Weight 550 lbs
Width 60 Inches
Depth 32.5 Inches
Height 26 Inches (Including 6" Adjustable Legs or Casters)
Drawer Extension Up to 25 Inches (Maximum Shown on Spec Sheet)
Legs 6" Adjustable Stainless Steel Legs (Casters Optional)
Voltage 120 Volts
Amps 8 (Compressor Only; Not for Breaker Sizing)
Hertz 50/60
Phase 1
Power Cord 6' Cord with Grounded Plug
Capacity 10 Cu. Ft. Cooled Volume
Holding Temperature 37 - 40 Degrees F (Design Range per Southbend Manual)
Cooling Capacity 1,802 BTU/H
Horsepower 1/4 HP
Refrigerant R-404A (CFC-Free)
Refrigeration Self-Contained, Expansion Valve
Controls Adjustable Digital Thermostat
Evaporator Coil Coated Mullion Coils
Condensate 1/2" I.D. Vinyl Drain Tube (Evaporator Pan Standard Only on 72" and Wider Models)
Tubing Cover Included on 60" and Wider Units
Drawers 2 x 31" Self-Closing Drawers on Stainless Steel RollersRemovable Drawer Assembly
Pan Capacity 4 Pans, 12" x 20" x 4" (Each 31" drawer holds two pans side-by-side; Pans Not Included)
Construction 304 Stainless Steel, #3 Polish (Top, Front, Sides, Back, Drawers and Interior)
Insulation Foamed-in-Place CFC-Free Polyurethane
Gaskets Rubber Magnetic Drawer Gaskets
Interior Coved Corners (Meets NSF Standard 7)
Top Mounting Modular Range Top Sections Mount with an Insulated Base Adapter
Clearances 2" Minimum at Rear
Room Temperature 55 - 90 Degrees F
Options Casters (Front Two Lock)Cable Restraint KitCaster Frame
Certifications ULNSFMade in USA
Warranty 1 Year Parts and Labor (Southbend Limited Warranty)
Usage Commercial Use Only

Certifications

UL | NSF | Made in USA

Description

A 60" refrigerated base that keeps 4 pans of cold prep right under your range top.

Southbend 20060SB 60 inch refrigerated chef base, representative image of the series shown with optional casters

The Southbend 20060SB puts refrigerated storage at the cook line for restaurants, grills and hotel kitchens. Two self-closing drawers (2 x 31") hold 4 pans of 12" x 20" x 4", the cabinet holds 10 cu. ft., and the stainless top is built to carry a Southbend modular range top. It is 26" high on 6" legs and runs on 120V with its own 1/4 HP compressor.

Will it fit · Will it plug in

Outside size
60" W × 32.5" D × 26" H, including 6" adjustable legs or casters
Drawer extension
Drawers pull out up to 25" (maximum shown on the spec sheet); leave aisle room in front
Inside
2 x 31" drawers, 4 pans of 12" x 20" x 4"; 10 cu. ft. cooled volume
Power
120V, 1 phase, 50/60 Hz; 8 amps for the compressor; 6' cord with a grounded plug
Clearance
2" minimum at the rear; room temperature between 55°F and 90°F
Shipping weight
550 lbs

Dimensions are from Southbend's PSCR spec sheet (Rev 8, April 2025). Measure every doorway and turn on the delivery path first; the smallest outside dimension is the 26" height.

Pan drawers at the line

Self-closing drawers roll on stainless steel rollers; each 31" drawer holds two pans side-by-side, so mise en place stays an arm's length from the burners.

Built to carry a range top

Southbend modular sectional range tops mount directly on top with an insulated base adapter, at a 26" base height.

Fast temperature recovery

A CFC-free system with an expansion valve, coated mullion coils and an adjustable digital thermostat. It runs on R-404A with a 1/4 HP compressor.

Stainless inside and out

Top, front, sides, back, drawers and interior are 304 stainless steel with a #3 polish; coved interior corners meet NSF Standard 7.

Tight, easy-clean seals

Rubber magnetic gaskets seal each drawer, and the drawer assembly is removable for cleaning.

Made in the USA

Built by Southbend in Fuquay-Varina, NC, UL and NSF listed, with a 1-year parts and labor warranty.

Delivery and setup

  • Ships by freight carrier. See our shipping policy for delivery details, and call us for the current lead time.
  • Standard delivery is to your entrance and does not include inside delivery or unpacking.
  • Inspect the shipment before signing for it and note any damage on the delivery receipt.
  • Casters, a caster frame and a cable restraint kit are extra-cost options; ask us when you order.
  • Southbend's manual says to let it reach operating temperature before loading, then load it in three portions about three hours apart.

Questions buyers ask

What pans fit in the drawers?

The drawers hold 4 standard 12" x 20" x 4" pans in total: each 31" drawer holds two pans side-by-side. Pans are not included.

What outlet does it need?

It runs on 120V single phase, 50 or 60 Hz, through a 6' cord with a grounded plug. The 8 amp rating is for the compressor only; Southbend says not to use it for breaker sizing, so have your electrician size the circuit.

Can I put a griddle or charbroiler on top?

Yes, this base is built to support Southbend modular sectional range tops, mounted with an insulated base adapter. Southbend does not publish a weight rating for the top, so call us to confirm your exact top before ordering.

How cold does it keep food?

Southbend's manual gives a design range of 37 to 40°F for refrigerated storage, set with the adjustable digital thermostat. Keep the room between 55°F and 90°F.

Where does the condensate go?

Condensate leaves through a 1/2" inside-diameter vinyl tube behind the compressor area. A condensate evaporator pan is standard only on 72" and wider models, so plan for the drain tube at this 60" size.

Will it fit through my door?

It is 60" wide, 32.5" deep and 26" high and weighs 550 lbs shipped. Measure every doorway and turn on the delivery path before ordering.

Can it go next to my fryer or range?

Southbend allows it in a sectional battery only if the base sections next to it are insulated or do not produce heat. Leave at least 2" at the rear.

What does the warranty cover?

Southbend covers parts and labor for 1 year from purchase, serviced by a Southbend Authorized Service Agency. Door seals and rubber seals are limited to 90 days, and damage from improper installation or misuse is not covered.

UL and NSFUL listed; coved interior meets NSF Standard 7.
Made in USABuilt by Southbend in North Carolina.
120V Power6' cord with a grounded plug; 1/4 HP compressor.
1-Year WarrantyParts and labor, by Southbend Authorized Service.

Specs

Manufacturer Southbend
Model Number 20060SB
Series Platinum Series Refrigerated Base (Self-Contained)
Quantity 1 Each
Shipping Weight 550 lbs
Width 60 Inches
Depth 32.5 Inches
Height 26 Inches (Including 6" Adjustable Legs or Casters)
Drawer Extension Up to 25 Inches (Maximum Shown on Spec Sheet)
Legs 6" Adjustable Stainless Steel Legs (Casters Optional)
Voltage 120 Volts
Amps 8 (Compressor Only; Not for Breaker Sizing)
Hertz 50/60
Phase 1
Power Cord 6' Cord with Grounded Plug
Capacity 10 Cu. Ft. Cooled Volume
Holding Temperature 37 - 40 Degrees F (Design Range per Southbend Manual)
Cooling Capacity 1,802 BTU/H
Horsepower 1/4 HP
Refrigerant R-404A (CFC-Free)
Refrigeration Self-Contained, Expansion Valve
Controls Adjustable Digital Thermostat
Evaporator Coil Coated Mullion Coils
Condensate 1/2" I.D. Vinyl Drain Tube (Evaporator Pan Standard Only on 72" and Wider Models)
Tubing Cover Included on 60" and Wider Units
Drawers 2 x 31" Self-Closing Drawers on Stainless Steel RollersRemovable Drawer Assembly
Pan Capacity 4 Pans, 12" x 20" x 4" (Each 31" drawer holds two pans side-by-side; Pans Not Included)
Construction 304 Stainless Steel, #3 Polish (Top, Front, Sides, Back, Drawers and Interior)
Insulation Foamed-in-Place CFC-Free Polyurethane
Gaskets Rubber Magnetic Drawer Gaskets
Interior Coved Corners (Meets NSF Standard 7)
Top Mounting Modular Range Top Sections Mount with an Insulated Base Adapter
Clearances 2" Minimum at Rear
Room Temperature 55 - 90 Degrees F
Options Casters (Front Two Lock)Cable Restraint KitCaster Frame
Certifications ULNSFMade in USA
Warranty 1 Year Parts and Labor (Southbend Limited Warranty)
Usage Commercial Use Only

Certifications

UL | NSF | Made in USA

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Google Reviews

Related Products

Recently viewed