Structural Concepts FLP10WL Allure 115-1/4" Refrigerated Floral Case, Inside Left-Hand Wrap Low Profile, Remote
A refrigerated case that keeps cut flowers fresh at the point of sale.
The Structural Concepts FLP10WL is a 115-1/4" wide Allure refrigerated floral case. Structural Concepts rates it for a warmest average product temperature of 38°F. It runs on remote DX refrigeration: the condensing unit is not included and a floor drain is required. It measures 115-1/4" W x 34-1/8" D x 47-5/8" H and connects with hardwired electrical leads at 110-120V, 2.05 A.
Measure doorways and turns on the delivery path; the smallest outside dimension is the 34-1/8" depth.
Rated for floral products at 38°F, with a digital Fahrenheit thermometer.
Comes with 33 buckets, 8" x 13".
Three display levels with an adjustable lower front display.
Remote DX refrigeration; the condensing unit is not included.
It is hardwired with electrical leads at 110-120V, 1-phase, 2.05 A, with 15 A max overcurrent protection.
The case is 115-1/4" wide, 34-1/8" deep and 47-5/8" high. Measure doorways and turns before delivery.
No. This is a remote case, so the condensing unit is not included and a floor drain is required. Structural Concepts lists a 8,843 BTU/hr conventional rack load at a 26°F suction temperature.
Structural Concepts lists 38°F for floral products. A digital Fahrenheit thermometer is included.
The Structural Concepts sheet lists built in accordance with AHRI Std 1200, ETL Listed to UL 471, ETL Listed to CAN/CSA 22.2 No. 120.
1-year parts and labor. A second-year parts and labor warranty is a factory option.
Yes. Structural Concepts equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Structural Concepts |
|---|---|
| Model Number | FLP10WL |
| Series | Allure |
| Case Type | FLP Straight Inside LH Wrap Open Low Profile Case |
| Intended Product | Floral products |
| Width | 115-1/4 Inches |
| Depth | 34-1/8 Inches |
| Height | 47-5/8 Inches |
| Voltage | 110-120 Volts |
| Phase | 1 |
| Hertz | 60 Hz |
| Amps | 2.05 Amps |
| Minimum Circuit Amps | 15 Amps |
| Max Overcurrent Protection | 15 Amps |
| Watts | 199 Watts |
| Plug Type | Hardwired Electrical Leads |
| GFCI Note | If GFCI protection is required, use a GFCI breaker, not a GFCI receptacle |
| Temperature Range | 38 Degrees F Warmest Average Product Temperature |
| Refrigeration System | Remote DX; Condensing Unit Not Included |
| Saturated Suction Temperature | 26 Degrees F |
| Load, Conventional Rack | 8,843 BTU/hr |
| Load, Parallel Rack | 8,188 BTU/hr |
| Defrost | Every 3 Hours, 25 Minutes |
| Drain | Floor Drain Required |
| Refrigerant | R404A or R449A Remote; R744 Option Listed |
| Buckets | 33 Buckets, 8" x 13" |
| Exterior | Laminate (stock colors) |
| Interior | Powder coated Silversan Black |
| Rear Exterior | Powder coated Silversan Black |
| Base | Casters with levelers |
| End Panels | Full with stainless steel mirror interior |
| Standard Features | 8" X 13" BucketsAdjustable lower front displayBase with casters & levelersBlack interiorDigital fahrenheit thermometerThree display levels |
| Factory Options | End Panels: Cutaway with glassRefrigeration: Remote DX with thermostat, solenoid & TXVSensor: CPC discharge air sensor |
| Intended Environment | Type I: Ambient 75 Degrees F, 55% Relative Humidity |
| Certifications | ETL Listed, AHRI 1200 |
| Standards | Accordance with AHRI Std 1200ETL Listed to UL 471ETL Listed to CAN/CSA 22.2 No. 120 |
| Warranty | 1-year parts and labor |
| Warranty Option | Second-Year Parts and Labor |
| Clearance | 4" Minimum to Walls and Ceilings |
| Placement | 5 ft. From Exterior Windows10 ft. From HVAC Ceiling Vents15 ft. From Exterior Doors |
| Leveling | Shim During Installation So the Case Is Level and Plumb |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
