Summit SBC58BFRTPADA 24" Built-In Front Tap Beer Kegerator, ADA Height, Dual Tap Kit, 5.3 Cu. Ft., Black, 115V
Description
A 24-inch undercounter kegerator that pours two beers through the door, so the countertop needs no tower hole and it fits ADA-height counters.
The Summit SBC58BFRTPADA is a 23.63" wide, 32" high built-in kegerator for two 1/6 (sixtel) kegs. Its twin taps are mounted on the door, so you can install it under a counter without cutting a hole for a draft tower. It ships fully assembled with a 5 lb. CO2 tank (ships empty), regulator, dual tap draft arm, Sankey American tap and connection hardware. At 32" high it fits under lower ADA-compliant counters. Summit lists it ETL-S to NSF-7 for commercial use, and it is also approved for homes.
Will it fit · Will it hook up
- Outside size
- 23.63" W x 27.38" D x 32" H to the hinge cap
- ADA height
- 32" high to fit under lower ADA-compliant counters
- Door open
- 51.88" deep with the door open 90°
- Opening
- 24" wide minimum opening for recessed installation; allow 2" behind and some airflow at the sides and top
- Power
- 115V AC, 60 Hz, 0.8 A; dedicated grounded three-prong outlet
- Room
- 60°F to 90°F, protected from wind, rain, spray and drips
Allow 51.88" of front depth for the door to swing fully open.
Taps on the door
Two faucets pour through the front door, so the countertop needs no hole and stays free. The taps sit within easy reach.
Complete dual tap kit
A 5 lb. CO2 tank (ships empty), regulator, dual tap draft arm, Sankey American tap and connection hardware are included.
Two sixtel kegs
The 5.3 cu. ft. interior holds two 1/6 (sixtel) kegs, with an interior bracket for the CO2 tank behind the kegs.
Mechanical controls
An interior dial thermostat sets 36°F to 46°F with no circuit boards. Automatic defrost and a cold wall design with hidden evaporator.
Commercially listed
ETL-S listed to ANSI-NSF Standard 7 for commercial use; also approved for residential settings.
ADA-compliant height
Sized 32" high for installation under lower ADA-compliant counters.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- It ships fully assembled. Let it stand for about 2 hours before plugging it in, per Summit's front-tap kegerator manual.
- Plug it into its own grounded three-prong 115V AC, 60 Hz outlet.
- For recessed installation, Summit calls for a 24" wide minimum opening, 2" of space behind the unit and the supplied rear spacers. Keep the bottom grille clear.
- Have the CO2 tank filled before first use. The door ships with a right-hand swing; door reversal is a factory option.
Questions buyers ask
Do I need to cut a hole in my counter?
No. The taps are on the front door, so the kegerator installs under a counter with no draft tower hole.
What kegs does it hold?
Two 1/6 (sixtel) kegs in a 5.3 cu. ft. interior, one on each of the two taps.
What is included?
A 5 lb. CO2 tank (ships empty), regulator, dual tap draft arm, Sankey American tap, connection hardware and a door-mounted two-piece stainless drip tray.
What temperature does it hold?
Summit lists 36°F to 46°F, set with an interior dial thermostat.
What power does it need?
115V AC, 60 Hz. Summit lists 0.8 amps; plug it into its own grounded three-prong outlet.
Is it approved for commercial use?
Yes. Summit lists it ETL-S to ANSI-NSF Standard 7 for commercial use. It is also approved for homes.
What warranty does it have?
Summit lists a 1-year parts and labor warranty and a 5-year compressor warranty.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | SBC58BFRTPADA |
| Type | Built-In Front Tap Beer Kegerator, ADA Height |
| Door | Black |
| Cabinet | Black |
| UPC | 761101145402 |
| Width | 23.63 Inches |
| Depth | 27.38 Inches |
| Height | 32 Inches |
| Cabinet Height | 31.88" |
| Depth with Door Open 90° | 51.88" |
| Interior Size | 21" W x 18" D x 27.75" H |
| Compressor Step | 21" W x 6" D x 5.5" H |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 0.8 Amps |
| Energy Use | 293 kWh per Year |
| Capacity | 5.3 cu. ft. |
| Keg Capacity | 2 Sixth Barrel Kegs |
| Tap Type | Front Door Taps, 2 Faucets |
| Tap Kit | Included5 lb. CO2 Tank, Ships EmptyRegulatorDual Tap Draft ArmSankey American TapConnection Hardware |
| Drip Tray | Two-Piece Stainless Steel, Door-Mounted, Removable |
| Temperature Range | 36°F to 46°F |
| Thermostat | Interior Mechanical Dial |
| Evaporator | Hidden, Cold Wall Design |
| Finish | Black Door and CabinetStainless Steel Handle and Kickplate |
| Interior | White LinerStainless Floor CoverInterior CO2 BracketLight with Rocker Switch |
| Door Swing | Right HandFactory Reversible |
| Recessed Opening | 24" Wide Minimum2" Rear Clearance |
| Ambient Range | 60°F to 90°F |
| Refrigerant | R600a |
| Defrost | Automatic |
| Certifications | ETL, ETL-C, ETL-S |
| Sanitation Listing | ETL-S to ANSI-NSF Standard 7 |
| Warranty | 1 Year Parts and Labor5 Years Compressor |
| Factory Options | Door ReversalTop LockDoor Latch, adds 1-1/2" Width3" NSF Listed Casters |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

