Summit SBC58BFRTPCFADA 24" Front Tap Built-In Cold Brew Coffee Kegerator, ADA Height, 5.3 Cu. Ft., 2 Taps, Black, 115V
Description
A 24-inch under-counter kegerator that pours cold brew from two taps in the door, with no hole in the countertop.
The Summit SBC58BFRTPCFADA serves cold brew coffee from two 1/6 (sixtel) kegs through taps built into its front door. Because there is no tower on top, it slides under a counter without cutting the countertop, and at 32" high it fits lower ADA counters. It arrives fully assembled with a 5 lb. nitrogen tank, regulator and dual tap draft arm, and it is ETL-S listed to NSF-7 for commercial use while also meeting residential standards.
Will it fit · Will it hook up
- Outside size
- 23.63" W x 27.38" D x 31.88" H (32" to the hinge cap)
- Door clearance
- 51.88" of depth with the door open 90°
- Install
- Built in under a counter or freestanding; no countertop hole needed
- Power
- 115V AC, 60 Hz, 0.8 A
- Kegs
- Two 1/6 (sixtel) kegs; interior 21" W x 18" D x 27.75" H
The nitrogen tank mounts on an inside bracket behind the kegs, so it adds no outside depth.
Taps in the door
Two faucets on the front door pour at counter level and free the countertop.
Complete coffee kit
5 lb. nitrogen tank (ships empty), regulator, dual tap draft arm, Sankey American tap and hardware.
Simple controls
Mechanical dial thermostat inside, 36 to 46°F, with automatic defrost and a cold wall hidden evaporator.
Built for loading kegs
Stainless steel floor cover, white interior liner and an interior light with on/off switch.
Easy cleanup
Front-mounted two-piece stainless drip tray lifts off for cleaning.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- It arrives fully assembled. The nitrogen tank ships empty; have it filled before first use.
- Adjust the legs for the counter height; a removable leg shield is included to close any gap under the kickplate.
- It plugs into a standard 115V, 60 Hz outlet. The door ships right hand; a left hand door (LHD) is a factory option.
Questions buyers ask
Do I need to cut the countertop?
No. The taps are in the front door, so there is no draft tower and no hole in the counter.
What kegs fit?
Two 1/6 (sixtel) kegs. The included kit has a Sankey American tap and a dual tap draft arm.
What temperature does it hold?
36 to 46°F, set with a mechanical dial thermostat inside the cabinet.
Will it fit under my counter?
It is 31.88" tall, 32" to the hinge cap, for lower ADA counters. It is 23.63" wide and 27.38" deep.
Is it approved for commercial use?
Yes. It is ETL-S listed to NSF-7 for commercial use and also meets residential standards.
What warranty does it have?
Summit lists 1 year parts and labor and 5 years on the compressor.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | SBC58BFRTPCFADA |
| Type | Front Tap Built-In Cold Brew Coffee Kegerator, 24" Wide, ADA Height |
| Color | Black with Stainless Steel Accents |
| UPC | 761101145488 |
| Width | 23.63 Inches |
| Depth | 27.38 Inches |
| Height | 31.88 Inches |
| Height to Hinge Cap | 32 Inches |
| Depth with Door Open 90° | 51.88 Inches |
| Interior Size | 21" W x 18" D x 27.75" H |
| Compressor Step | 21" W x 6" D x 5.5" H |
| Capacity | 5.3 cu. ft. |
| Temperature Range | 36 to 46°F |
| Defrost | Automatic |
| Refrigerant | R600a, 0.64 oz. |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 0.8 Amps |
| Energy Use | 293 kWh per Year |
| Taps | 2 Front Taps Through the Door |
| Keg Capacity | 2 Sixtel 1/6 Kegs |
| Tap Kit | 5 lb. Nitrogen Tank, Ships EmptyRegulatorDual Tap Draft ArmSankey American TapConnection Hardware |
| Accessories | Front-Mounted 2-Piece Stainless Steel Drip TrayRemovable Leg ShieldInterior Nitrogen Tank Bracket |
| Control Type | Mechanical Dial Thermostat, Inside |
| Door | Solid with Front Taps, Right Hand Standard, Factory ReversibleStainless Steel Handle |
| Features | Stainless Steel Floor CoverCold Wall with Hidden EvaporatorWhite Interior LinerInterior Light with Rocker SwitchStainless Steel Kickplate |
| Installation | ADA Height for Lower CountersBuilt-In or Freestanding |
| Factory Options | L-TopLockLHD Left Hand DoorLatch with Manual Release, Adds 1-1/2" WidthCAS3 3" Casters |
| Certifications | ETL, ETL-C, ETL-S to NSF-7, CARB Compliant |
| Warranty | 1 Year Parts and Labor, 5 Years Compressor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

