Summit SBC58BLBIADAIFTWINCFB 24" Built-In Beer and Cold Brew Coffee Kegerator, ADA Height, Panel-Ready Door, 2 Taps, 5.5 cu. ft., 115V
A 32-inch-high, 24-inch-wide kegerator that pours beer and cold brew coffee from two taps under ADA-height counters.
The Summit SBC58BLBIADAIFTWINCFB is a 24" wide built-in beer and cold brew coffee kegerator with a panel-ready door and a black cabinet. At 32" high (32.25" to the hinge cap) it fits under lower ADA-compliant counters, and its front-breathing design allows built-in installation. It ships with a Sankey American dual tap kit with draft tower, a 5 lb. nitrogen tank with regulator for coffee and a 5 lb. CO2 tank with regulator for beer. Inside, the 5.5 cu. ft. cabinet holds two 1/6 (sixtel) kegs, one of beer and one of coffee; Summit notes it does not take a standard half barrel.
Measure the opening before ordering: the cabinet is 23.63" wide, 22.75" deep and 32.25" high, and the tower brings it to 47.5".
Ships with a Sankey American dual tap kit with draft tower, a 5 lb. nitrogen tank with regulator for coffee and a 5 lb. CO2 tank with regulator for beer.
Sized at 32" high (32.25" to the hinge cap) to fit under lower ADA-compliant counters. The fully finished cabinet can also stand alone.
Simple dial control inside the cabinet holds 34°F to 43°F. Automatic defrost keeps upkeep low.
Mount your own overlay panel (23-5/16" W x 28-1/4" H, at least 3/4" thick, 10 lb. maximum) so the door blends into the cabinetry. Panel and handle are not included.
One tap pours beer and the other pours cold brew coffee, each with its own gas tank and regulator.
Stainless steel floor cover protects the liner when loading kegs, and the two-piece stainless steel drip tray lifts off for washing.
The 5.5 cu. ft. interior holds two 1/6 (sixtel) kegs, one of beer and one of coffee; Summit notes it does not take a standard half barrel.
It ships with a Sankey American dual tap kit with draft tower, a 5 lb. nitrogen tank with regulator for coffee and a 5 lb. CO2 tank with regulator for beer.
Yes. Summit sizes it at 32" high (32.25" to the hinge cap) for lower ADA-compliant counters. It is 23.63" wide and 22.75" deep.
Yes. Summit lists it as ETL-S to NSF-7 for commercial use, and it meets UL-471.
Summit offers these as factory options, ordered with the unit: left hand door swing (LHD); stainless steel kickplate (SSK); digital thermostat (DT). They are not included in this listing.
1 year parts and labor and 5 years on the compressor, per Summit.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | SBC58BLBIADAIFTWINCFB |
| Type | 24" Built-In Beer and Cold Brew Coffee Kegerator |
| Use | Commercial, ETL-S Listed to NSF-7 |
| Unit Weight | 110 lb. |
| Width | 23.63 Inches |
| Depth | 22.75 Inches |
| Height | 32.25 Inches |
| Cabinet Height | 32"32.25" to Hinge Cap |
| Depth with Door Open 90° | 45" |
| Height with Tap Tower | 47.5" |
| Interior Size | 21" W x 17.75" D x 25.75" H |
| Compressor Step | 21" W x 5.5" D x 6.5" H |
| Capacity | 5.5 cu. ft. |
| Temperature Range | 34°F to 43°F |
| Thermostat | Dial |
| Defrost | Automatic |
| Refrigerant | R600a, 0.64 oz. |
| Fan Type | Exterior |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 1.2 Amps |
| Beverage | Beer and Cold Brew Coffee |
| Number of Taps | 2 |
| Tap Kit | A Sankey American dual tap kit with draft tower, a 5 lb. nitrogen tank with regulator for coffee and a 5 lb. CO2 tank with regulator for beer |
| Keg Capacity | Two 1/6 Sixtel KegsDoes Not Fit a Half Barrel |
| Gas Tank | 5 lb. Nitrogen and 5 lb. CO2 Tanks IncludedTwo Tank Brackets Inside |
| Door | Panel-ReadyOverlay Panel 23-5/16" W x 28-1/4" H, Min. 3/4" Thick, 10 lb. MaxPanel and Handle Not Included |
| Cabinet | Black, Fully Finished |
| Door Swing | Right Hand, Factory Reversible |
| Interior | Stainless Steel Floor CoverSeamless Interior |
| Interior Light | Yes, Rocker Switch |
| Certifications | ETL, ETL-C, ETL-S to NSF-7, CARB Compliant |
| Standards | Meets UL-471 |
| Factory Options | Left hand door swing (LHD)Stainless steel kickplate (SSK)Digital thermostat (DT) |
| Warranty | 1 Year Parts and Labor, 5 Years Compressor |
| UPC | 761101156651 |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
