Summit SBC58BLIFFLTWCFADA 24" Built-In Floating Tap Cold Brew Coffee Kegerator, ADA Height, Panel-Ready Door, 2 Taps, 5.8 cu. ft., 115V
Description
A 32-inch-high, 24-inch-wide kegerator with a counter-top floating tap tower that pours cold brew coffee with no hole drilled in the counter.
The Summit SBC58BLIFFLTWCFADA is a 24" wide built-in floating tap cold brew coffee kegerator with a panel-ready door and a black cabinet. The draft tower is not mounted on the kegerator: the line runs out of the top of the cabinet to a separate tap tower that sits on the counter with non-permanent adhesive strips, so you can remove it without damaging the counter. At 32" high it is sized for ADA-compliant counters. It ships with a twin tap draft arm, a Sankey American tap, a 5 lb. nitrogen tank (ships empty), a regulator and the connection hardware. Inside, the 5.8 cu. ft. cabinet holds two 1/6 (sixtel) kegs.
Will it fit · Will it hook up
- Outside size
- 23.63" W x 22.38" D x 32" H; 24.3" deep with the handle; 44.5" deep with the door open 90°
- Counter height
- 32" high, for lower ADA-compliant counters; the tap tower sits on top of the counter
- Installation
- Front-breathing: built in under a counter or freestanding
- Power
- 115V AC, 60 Hz, 0.8 A
- Kegs
- Two 1/6 (sixtel) kegs
- Door panel
- Overlay panel 23-5/16" W x 28-1/4" H, at least 3/4" thick, 10 lb. maximum; panel and handle not included
Measure the opening before ordering: the cabinet is 23.63" wide, 22.38" deep and 32" high.
Complete tap kit
Ships with a twin tap draft arm, a Sankey American tap, a 5 lb. nitrogen tank (ships empty), a regulator and the connection hardware.
No counter drilling
The tower attaches to the counter with non-permanent adhesive strips and needs no tools. Remove it and plug the tower hole to use the unit as an all-refrigerator with the included glass shelves and scalloped bottle rack.
Dial thermostat
Simple dial control inside the cabinet holds 36°F to 46°F. Automatic defrost keeps upkeep low.
Panel-ready door
Mount your own overlay panel (23-5/16" W x 28-1/4" H, at least 3/4" thick, 10 lb. maximum) so the door blends into the cabinetry. Panel and handle are not included.
Easy to clean
Stainless steel floor cover protects the liner when loading kegs, and the two-piece stainless steel drip tray lifts off for washing.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- The gas tank ships empty. Have it filled by a local gas supplier before the first pour.
- Plan a 115V, 60 Hz outlet near the unit; Summit lists 0.8 A.
- The door panel and handle are not included; have your cabinet maker build the overlay panel to the size above.
Questions buyers ask
What kegs does the SBC58BLIFFLTWCFADA hold?
The 5.8 cu. ft. interior holds two 1/6 (sixtel) kegs.
What comes in the tap kit?
It ships with a twin tap draft arm, a Sankey American tap, a 5 lb. nitrogen tank (ships empty), a regulator and the connection hardware.
Do I need to drill the counter?
No. The tower sits on the counter with non-permanent adhesive strips and connects to the kegerator through the top of the cabinet.
Is it approved for commercial use?
Yes. Summit lists it as ETL-S to NSF-7 for commercial use. Summit also approves it for residential use.
What factory options are there?
Summit offers these as factory options, ordered with the unit: left hand door swing (LHD); top-mounted keyed lock (L-TopLock); door latch for vehicles, adds 1-1/2" of width (Latch); 3" NSF listed casters (CAS3). They are not included in this listing.
What warranty does it have?
1 year parts and labor and 5 years on the compressor, per Summit.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | SBC58BLIFFLTWCFADA |
| Type | 24" Built-In Floating Tap Cold Brew Coffee Kegerator |
| Use | Commercial or Residential |
| Unit Weight | 180 lb. |
| Width | 23.63 Inches |
| Depth | 22.38 Inches |
| Height | 32 Inches |
| Cabinet Height | 31.88"32" to Hinge Cap |
| Depth with Handle | 24.3" |
| Depth with Door Open 90° | 44.5" |
| Interior Size | 21" W x 17.75" D x 27" H |
| Compressor Step | 21" W x 5.5" D x 6.5" H |
| Capacity | 5.8 cu. ft. |
| Temperature Range | 36°F to 46°F |
| Thermostat | Dial |
| Defrost | Automatic |
| Refrigerant | R600a, 0.64 oz. |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 0.8 Amps |
| Energy Usage | 239 kWh/year |
| Beverage | Cold Brew Coffee |
| Number of Taps | 2 |
| Tap Kit | A twin tap draft arm, a Sankey American tap, a 5 lb. nitrogen tank (ships empty), a regulator and the connection hardware |
| Keg Capacity | Two 1/6 Sixtel Kegs |
| Gas Tank | Nitrogen Tank IncludedBracket Inside the Cabinet |
| Door | Panel-ReadyOverlay Panel 23-5/16" W x 28-1/4" H, Min. 3/4" Thick, 10 lb. MaxPanel and Handle Not Included |
| Cabinet | Black, Fully Finished |
| Door Swing | Right Hand, Factory Reversible |
| Interior | Stainless Steel Floor CoverSeamless Interior |
| Shelves | 4 Glass and Scalloped, Adjustable |
| Interior Light | Yes, Rocker Switch |
| Certifications | ETL, ETL-C, ETL-S to NSF-7, CARB Compliant |
| Factory Options | Left hand door swing (LHD)Top-mounted keyed lock (L-TopLock)Door latch for vehicles, adds 1-1/2" of width (Latch)3" NSF listed casters (CAS3) |
| Warranty | 1 Year Parts and Labor, 5 Years Compressor |
| UPC | 761101145570 |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

