Champion 100 PRO-HR 100" Heat Recovery 2-Tank Rack Conveyor Dishwasher with Prewash, High Temp, 348 Racks/Hr, 21 kW Booster
A 2-tank high-temp rack conveyor that washes 348 racks an hour and reuses its own exhaust heat.
The Champion 100 PRO-HR is a 100" 2-tank rack conveyor with a 36" heavy-duty prewash ahead of a 64" wash and power rinse section for hotels, hospitals, schools and busy restaurants. Champion rates it at 348 racks per hour (NSF), up to 6,960 dishes per hour, using 0.28 gallons per rack and 100 gallons per hour at most. Exhaust air energy recovery uses the heat leaving the machine to preheat incoming cold water, and the 21 kW booster is built in, so it runs on a 110°F hot water line. It runs on 3-phase power and is built in left-to-right or right-to-left versions.
Measure doorways and turns on the delivery path: the narrowest side is the 26-11/16" depth, and the crate is about 113-1/2" long.
NSF-rated at 348 racks per hour with a 9.6 ft/min conveyor. Pot and pan mode slows it to 4.6 ft/min, one rack at a time.
Water use is 0.28 gallons per rack and 100 gallons per hour at most. The energy sentinel shuts the pumps off when the machine sits idle.
A heat recovery coil uses the heat in the exhaust air to preheat the incoming cold water, fed through its own 1/2" cold water line.
A powered 36" prewash with its own 17 gallon tank and 2 HP pump knocks off heavy soil before the wash tank.
The touchscreen shows condition alerts and cleaning steps in several languages, with on-board diagnostics and an automated delime function.
Single-piece hood, scrap screen and stainless upper and lower wash arm manifolds. Insulated doors open a full 180°.
High temperature. It sanitizes with hot water, using its built-in 21 kW booster fed with 110°F water.
No separate booster. The 21 kW booster for a 70°F rise is built in, interplumbed and interwired.
Champion's sheet calls for 150 CFM at the load end and 200 CFM at the unload end at 1/4" static pressure, with a 3-7/8" x 15-7/8" fabricated duct. Plan this with your mechanical contractor. Do not let freezing air be drawn into the heat recovery coil when the building vent fan is off.
3-phase power. With the 21 kW booster on one connection the rated amps are: 208V 3-ph: call factory; 240V 3-ph: 136 A, 175 A min. circuit; 480V 3-ph: 68 A, 90 A min. circuit; 575V 3-ph: 55 A, 70 A min. circuit.
Yes. Champion builds a steam version with a 1-1/2" NPT steam supply at 10-30 psi and a 1" NPT condensate return. It uses 125 lb/hr for the tank and 110 lb/hr for the booster.
It is built as left-to-right or right-to-left. Choose the direction that matches your dish tables before you order; the drawings show both.
Champion lists a 1 year parts and labor warranty. Register the machine with Champion after installation.
Yes. Champion equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Champion |
|---|---|
| Model Number | 100 PRO-HR |
| Series | PRO Series Rack Conveyor |
| Type | High Temperature 2-Tank Rack Conveyor with Heavy Duty Prewash with Heat Recovery |
| Shipping Weight | 1,300 lb. |
| Width | 104 Inches |
| Depth | 26-11/16 Inches |
| Height | 77-1/8 Inches |
| Machine Length | 100" Machine36" Prewash + 64" Wash and Power Rinse104" Overall with 2" Table Connections |
| Crated Length | 113-1/2 Inches |
| Load Height | 34 Inches |
| Vertical Clearance | 20" ClearAccommodates 18" x 26" Sheet Pans |
| Door Clearance | 27 Inches in Front |
| Capacity | 348 Racks per Hour |
| Dishes per Hour | Up to 6,960 |
| Conveyor Speed | 9.6 ft/minPot and Pan Mode 4.6 ft/min, One Rack at a Time |
| Tank Capacity | 17 Gal. Prewash + 17 Gal. Wash + 17 Gal. Power Rinse Tanks |
| Rack Complement | 1 Peg and 1 Flat 20" x 20" Rack |
| Water per Rack | 0.28 Gallons |
| Water per Hour | 100 Gallons Maximum |
| Hot Water Connection | 3/4" NPT110°F at 25 psi Flowing with BoosterInitial Fill 51 Gal. |
| Cold Water Connection | 1/2" NPT55°F Minimum30 psi Flowing |
| Drain Connection | 1-1/4" NPT15 gal/min Maximum Flow |
| Water Hardness | Less than 3.5 Grains per Gallon |
| Temperature | High Temperature |
| Tank Heat | 15 kW ElectricPower Rinse 10 kW Electric |
| Booster | Built-In 21 kW, 70°F Rise, Interplumbed and Interwired |
| Horsepower | 2 HP prewash, 2 HP wash and 2 HP power rinse pumps; 1/6 HP drive |
| Exhaust | Load End 150 CFMUnload End 200 CFMat 1/4" Static Pressure |
| Duct Size | 3-7/8" x 15-7/8" Outside Dimensions |
| Voltage | 208, 240, 480 or 575 Volts |
| Phase | 3 |
| Hertz | 60 Hz |
| Connection | Two Point StandardField Convertible to Single Point except 208V |
| Rated Amps, Single Point with 21 kW Booster | 208V 3-ph: call factory240V 3-ph: 136 A, 175 A min. circuit480V 3-ph: 68 A, 90 A min. circuit575V 3-ph: 55 A, 70 A min. circuit |
| Rated Amps, Machine Circuit Only | 208V 3-ph: 98 A, 125 A min. circuit240V 3-ph: 85 A, 110 A min. circuit480V 3-ph: 42 A, 60 A min. circuit575V 3-ph: 33 A, 45 A min. circuit |
| Rated Amps, Booster Circuit Only | 208V 3-ph: 59 A, 80 A min. circuit240V 3-ph: 51 A, 70 A min. circuit480V 3-ph: 26 A, 35 A min. circuit575V 3-ph: 22 A, 30 A min. circuit |
| Steam Tank Heat Version | 1-1/2" NPT Steam at 10-30 psi1" NPT CondensateTank 125 lb/hrBooster 110 lb/hr |
| Steam Version Rated Amps | 208V 3-ph: 23 A, 30 A min. circuit240V 3-ph: 19 A, 25 A min. circuit480V 3-ph: 10 A, 15 A min. circuit575V 3-ph: 8 A, 15 A min. circuit |
| Construction | All Stainless Steel Heavy Gauge incl. Base, Legs and FeetFront and Side Enclosure Panels |
| Controls | Touchscreen DisplayOn-Board DiagnosticsAutomated DelimeAuto FillAuto DrainProgrammable Dwell |
| Direction of Operation | Left to Right or Right to Left |
| Champion Options | 33" Electric Blower DryerDirect Link or Direct Link Plus+ Connectivity |
| Champion Accessories | Table Limit Switch, Whisker or Button StyleVent Cowl with 7" StacksFlanged FeetWater Hammer KitDrain Water Tempering KitChemical Pump KitWater PRVKinetico Water SoftenerPeg, Flat and Sheet Pan Racks |
| Champion Tables and Add-Ons | Splash Shields24" or 30" Cantilever SideloaderPRO-90B Corner Loader and UnloaderRCT 64 or RCT 84 Roller TableRear Enclosure PanelsLime Shield Booster Delime |
| Certifications | cULus, NSF, ENERGY STAR |
| Warranty | 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
