Champion 64 PRO-HR 64" Heat Recovery 2-Tank Rack Conveyor Dishwasher, High Temp, 348 Racks/Hr, 21 kW Booster
Description
A 2-tank high-temp rack conveyor that washes 348 racks an hour and reuses its own exhaust heat.
The Champion 64 PRO-HR is a 64" 2-tank high temperature rack conveyor for hotels, hospitals, schools and busy restaurants. Champion rates it at 348 racks per hour (NSF), up to 6,960 dishes per hour, using 0.28 gallons per rack and 100 gallons per hour at most. Exhaust air energy recovery uses the heat leaving the machine to preheat incoming cold water, and the 21 kW booster is built in, so it runs on a 110°F hot water line. It runs on 3-phase power and is built in left-to-right or right-to-left versions.
Will it fit · Will it hook up
- Outside size
- 68" W x 26-11/16" D x 77-1/8" H including the heat recovery unit, per Champion
- Machine length
- 64" machine plus 2" table connections at each end, 68" overall; crated length 77-1/2"
- Clearances
- 34" load height; 20" clear opening for 18" x 26" sheet pans; 27" in front for the doors; 6" minimum from the back to the wall
- Hot water
- 3/4" NPT, 110°F at 25 psi flowing with the booster; initial fill 34 gal.
- Cold water
- 1/2" NPT, 55°F minimum at 30 psi flowing, feeds the heat recovery coil
- Drain
- 1-1/4" NPT; up to 15 gal. per minute
- Venting
- Load end 200 CFM and unload end 200 CFM at 1/4" static pressure; fabricated duct 3-7/8" x 15-7/8"
- Power
- 3-phase, 60 Hz. With the 21 kW booster on one connection: 208V 3-ph: call factory | 240V 3-ph: 131 A, 175 A min. circuit | 480V 3-ph: 66 A, 90 A min. circuit | 575V 3-ph: 53 A, 70 A min. circuit
- Water hardness
- Less than 3.5 grains per gallon
Measure doorways and turns on the delivery path: the narrowest side is the 26-11/16" depth, and the crate is about 77-1/2" long.
348 racks per hour
NSF-rated at 348 racks per hour with a 9.6 ft/min conveyor. Pot and pan mode slows it to 4.6 ft/min, one rack at a time.
0.28 gallons per rack
Water use is 0.28 gallons per rack and 100 gallons per hour at most. The energy sentinel shuts the pumps off when the machine sits idle.
Exhaust heat recovery
A heat recovery coil uses the heat in the exhaust air to preheat the incoming cold water, fed through its own 1/2" cold water line.
Touchscreen and diagnostics
The touchscreen shows condition alerts and cleaning steps in several languages, with on-board diagnostics and an automated delime function.
Built to clean
Single-piece hood, scrap screen and stainless upper and lower wash arm manifolds. Insulated doors open a full 180°.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Arrives by freight truck on a pallet. Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- Crated weight is 865 lb. Plan a liftgate or forklift and enough people to move it, and check doorway and hall clearances first.
- Champion says plumbing and electrical connections should be made by qualified personnel under local plumbing, sanitary and safety codes and the National Electrical Code.
- A water hammer arrestor (ASSE-1010 or equal) must be supplied by others in the water line. Champion does not endorse tankless water heaters or PEX lines for this machine.
- Champion factory authorized start-up is included as a standard feature.
Questions buyers ask
Is it high temp or low temp?
High temperature. It sanitizes with hot water, using its built-in 21 kW booster fed with 110°F water.
Do I need a booster heater?
No separate booster. The 21 kW booster for a 70°F rise is built in, interplumbed and interwired.
Does it need a hood or venting?
Champion's sheet calls for 200 CFM at the load end and 200 CFM at the unload end at 1/4" static pressure, with a 3-7/8" x 15-7/8" fabricated duct. Plan this with your mechanical contractor. Do not let freezing air be drawn into the heat recovery coil when the building vent fan is off.
What electrical service does it need?
3-phase power. With the 21 kW booster on one connection the rated amps are: 208V 3-ph: call factory; 240V 3-ph: 131 A, 175 A min. circuit; 480V 3-ph: 66 A, 90 A min. circuit; 575V 3-ph: 53 A, 70 A min. circuit.
Can I get steam tank heat?
Yes. Champion builds a steam version with a 1-1/2" NPT steam supply at 10-30 psi and a 1" NPT condensate return. It uses 125 lb/hr for the tank and 110 lb/hr for the booster.
Which way does it run?
It is built as left-to-right or right-to-left. Choose the direction that matches your dish tables before you order; the drawings show both.
What warranty does it have?
Champion lists a 1 year parts and labor warranty. Register the machine with Champion after installation.
Do you match lower prices?
Yes. Champion equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Champion |
|---|---|
| Model Number | 64 PRO-HR |
| Series | PRO Series Rack Conveyor |
| Type | High Temperature 2-Tank Rack Conveyor with Heat Recovery |
| Shipping Weight | 865 lb. |
| Width | 68 Inches |
| Depth | 26-11/16 Inches |
| Height | 77-1/8 Inches |
| Machine Length | 64" Machine68" Overall with 2" Table Connections |
| Crated Length | 77-1/2 Inches |
| Load Height | 34 Inches |
| Vertical Clearance | 20" ClearAccommodates 18" x 26" Sheet Pans |
| Door Clearance | 27 Inches in Front |
| Capacity | 348 Racks per Hour |
| Dishes per Hour | Up to 6,960 |
| Conveyor Speed | 9.6 ft/minPot and Pan Mode 4.6 ft/min, One Rack at a Time |
| Tank Capacity | 17 Gal. Wash Tank + 17 Gal. Power Rinse Tank |
| Rack Complement | 1 Peg and 1 Flat 20" x 20" Rack |
| Water per Rack | 0.28 Gallons |
| Water per Hour | 100 Gallons Maximum |
| Hot Water Connection | 3/4" NPT110°F at 25 psi Flowing with BoosterInitial Fill 34 Gal. |
| Cold Water Connection | 1/2" NPT55°F Minimum30 psi Flowing |
| Drain Connection | 1-1/4" NPT15 gal/min Maximum Flow |
| Water Hardness | Less than 3.5 Grains per Gallon |
| Temperature | High Temperature |
| Tank Heat | 15 kW ElectricPower Rinse 10 kW Electric |
| Booster | Built-In 21 kW, 70°F Rise, Interplumbed and Interwired |
| Horsepower | 2 HP wash and 2 HP power rinse pumps; 1/6 HP drive |
| Exhaust | Load End 200 CFMUnload End 200 CFMat 1/4" Static Pressure |
| Duct Size | 3-7/8" x 15-7/8" Outside Dimensions |
| Voltage | 208, 240, 480 or 575 Volts |
| Phase | 3 |
| Hertz | 60 Hz |
| Connection | Two Point StandardField Convertible to Single Point except 208V |
| Rated Amps, Single Point with 21 kW Booster | 208V 3-ph: call factory240V 3-ph: 131 A, 175 A min. circuit480V 3-ph: 66 A, 90 A min. circuit575V 3-ph: 53 A, 70 A min. circuit |
| Rated Amps, Machine Circuit Only | 208V 3-ph: 90 A, 110 A min. circuit240V 3-ph: 80 A, 100 A min. circuit480V 3-ph: 40 A, 50 A min. circuit575V 3-ph: 31 A, 40 A min. circuit |
| Rated Amps, Booster Circuit Only | 208V 3-ph: 59 A, 80 A min. circuit240V 3-ph: 51 A, 70 A min. circuit480V 3-ph: 26 A, 35 A min. circuit575V 3-ph: 22 A, 30 A min. circuit |
| Steam Tank Heat Version | 1-1/2" NPT Steam at 10-30 psi1" NPT CondensateTank 125 lb/hrBooster 110 lb/hr |
| Steam Version Rated Amps | 208V 3-ph: 15 A, 20 A min. circuit240V 3-ph: 14 A, 20 A min. circuit480V 3-ph: 7 A, 15 A min. circuit575V 3-ph: 6 A, 15 A min. circuit |
| Construction | All Stainless Steel Heavy Gauge incl. Base, Legs and FeetFront and Side Enclosure Panels |
| Controls | Touchscreen DisplayOn-Board DiagnosticsAutomated DelimeAuto FillAuto DrainProgrammable Dwell |
| Direction of Operation | Left to Right or Right to Left |
| Champion Options | 33" Electric Blower DryerDirect Link or Direct Link Plus+ Connectivity |
| Champion Accessories | Table Limit Switch, Whisker or Button StyleVent Cowl with 7" StacksFlanged FeetWater Hammer KitDrain Water Tempering KitChemical Pump KitWater PRVKinetico Water SoftenerPeg, Flat and Sheet Pan Racks |
| Champion Tables and Add-Ons | Splash Shields24" or 30" Cantilever SideloaderPRO-90B Corner Loader and UnloaderRCT 64 or RCT 84 Roller TableRear Enclosure PanelsLime Shield Booster Delime |
| Certifications | cULus, NSF, ENERGY STAR |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

