Champion 86 PRO 2-Tank High Temp Rack Conveyor Dishwasher, 348 Racks/Hr, Electric

Champion 86 PRO 2-Tank High Temp Rack Conveyor Dishwasher, 348 Racks/Hr, Electric

ChampionSKU: CHA-86 PRO

Champion Best Price Guarantee

Found a lower price? We'll match it.

Direction of operation
Machine voltage

$74,839.54Free shipping included

  • Ships in Next business day · free freight delivery
  • Warranty · 1-yr Parts and Labor
  • Best Price Guarantee · found it lower?

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)102" × 26‑11/16" × 65‑1/4"
Power208, 240, 480 or 575V · 136 A at 240V
Capacity348 Racks per Hour
Shipping weight1,200 lb.
ListedcULus, NSF, ENERGY STAR

Measure every doorway on the delivery path before you order.

Highlights

  • 348 racks per hour (NSF rated) at 9.6 ft/min
  • 0.28 gallons per rack, 100 gallons per hour maximum
  • 64" two-tank section (wash and power rinse) + 22" prewash
  • Optional built-in 12 kW or 21 kW booster heater
  • 102" shipping length x 26-11/16" deep x 65-1/4" high
  • 208, 240, 480 or 575V, 3-phase
  • cULus, NSF, ENERGY STAR; 1 year parts and labor warranty

Specifications

ManufacturerChampion
Model Number86 PRO
SeriesPRO Series Rack Conveyor
Machine Type2-Tank High Temperature Rack Conveyor
Tank HeatElectric
Direction of OperationLeft to right or right to left
Shipping Weight1,200 lb.
Width102"
Width NoteShipping Length; 90" Between Table Flanges
Depth26-11/16"
Height65-1/4"
Height NoteTo Top of Vent Stacks; Machine Body 58-1/4"
Load Height34"
Vertical Clearance20" Clear, Accepts 18" x 26" Sheet Pans
Door Clearance27" in Front
Capacity348 Racks per Hour
Conveyor Speed9.6 ft/min, Pot/Pan Mode 4.6 ft/min
Tank CapacityWash 17 gal, Power Rinse 17 gal, Prewash 9 gal
Initial Fill43 gal
Rack Complement1 Peg Rack and 1 Flat Rack, 20" x 20"
Water Consumption0.28 gal per Rack, 100 gal per Hour Max.
Hot Water Connection3/4" NPT; 110°F Min. at 25 PSI Flowing with Booster; 180°F at 20 PSI Flowing without Booster
Drain1-1/4" NPT; 15 gal/min Max. Flow
Water HardnessLess than 3.5 Grains per Gallon
ExhaustLoad End 150 CFM, Unload End 400 CFM, at 1/4" Static Pressure
Duct Size3-7/8" x 15-7/8" Outside
Tank Heater15 kW Electric, Power Rinse 10 kW Electric
BoosterOptional Built-In: 21 kW 70°F Rise or 12 kW 40°F Rise, Ships at 70°F, Field Convertible to 40°F
Pump MotorsPrewash 2 HP, Wash 2 HP, Power Rinse 2 HP, Drive 1/6 HP
Voltage208, 240, 480 or 575V
Phase3
Hertz60 Hz
Amps136 A at 240V
Amps NoteSingle Point with 21 kW Booster; Other Ratings Below
21 kW Booster, Single Point208V 3-Ph: call factory, 240V 3-Ph: 136 A Rated, 175 A Min. Circuit, 480V 3-Ph: 68 A Rated, 90 A Min. Circuit, 575V 3-Ph: 55 A Rated, 70 A Min. Circuit
12 kW Booster, Single Point208V 3-Ph: 132 A Rated, 175 A Min. Circuit, 240V 3-Ph: 114 A Rated, 150 A Min. Circuit, 480V 3-Ph: 57 A Rated, 80 A Min. Circuit, 575V 3-Ph: 45 A Rated, 60 A Min. Circuit
No Booster208V 3-Ph: 98 A Rated, 125 A Min. Circuit, 240V 3-Ph: 85 A Rated, 110 A Min. Circuit, 480V 3-Ph: 42 A Rated, 60 A Min. Circuit, 575V 3-Ph: 33 A Rated, 45 A Min. Circuit
21 kW Booster Only, Two Point208V 3-Ph: 59 A Rated, 80 A Min. Circuit, 240V 3-Ph: 51 A Rated, 70 A Min. Circuit, 480V 3-Ph: 26 A Rated, 35 A Min. Circuit, 575V 3-Ph: 22 A Rated, 30 A Min. Circuit
ConnectionShips Single Point; Field Convertible to Two Point
ExteriorStainless Steel, Heavy Gauge, Including Base, Legs and Feet, Front and Side Enclosure Panels
ControlsAdvanced Touchscreen Display, On-Board Diagnostics, Automated Delime, Vent Fan Control
Champion OptionsTwo-Point Electrical Connection, 33" Electric Blower Dryer, Built-In Booster 40°F or 70°F Rise, Direct Link and Direct Link Plus+ Connectivity
Champion AccessoriesChemical Pump Kit, Detergent and Rinse Aid, Drain Water Tempering Kit, Table Limit Switch, Vent Cowl, Water Hammer Kit, Water PRV, Kinetico Water Softener
Racks and TablesPeg, Flat and Sheet Pan Racks, PRO-90B Corner Loader and Unloader, RCT 64 or RCT 84 Roller Tables, Cantilever Sideloader, Splash Shields
CertificationscULus, NSF, ENERGY STAR
Warranty1 Year Parts and Labor

Resources & Documents

Specs

Manufacturer Champion
Model Number 86 PRO
Series PRO Series Rack Conveyor
Machine Type 2-Tank High Temperature Rack Conveyor
Tank Heat Electric
Direction of Operation Left to right or right to left
Shipping Weight 1,200 lb.
Width 102 Inches
Width Note Shipping Length; 90" Between Table Flanges
Depth 26-11/16 Inches
Height 65-1/4 Inches
Height Note To Top of Vent Stacks; Machine Body 58-1/4"
Load Height 34 Inches
Vertical Clearance 20" Clear, Accepts 18" x 26" Sheet Pans
Door Clearance 27" in Front
Capacity 348 Racks per Hour
Conveyor Speed 9.6 ft/minPot/Pan Mode 4.6 ft/min
Tank Capacity Wash 17 galPower Rinse 17 galPrewash 9 gal
Initial Fill 43 gal
Rack Complement 1 Peg Rack and 1 Flat Rack, 20" x 20"
Water Consumption 0.28 gal per Rack100 gal per Hour Max.
Hot Water Connection 3/4" NPT; 110°F Min. at 25 PSI Flowing with Booster; 180°F at 20 PSI Flowing without Booster
Drain 1-1/4" NPT; 15 gal/min Max. Flow
Water Hardness Less than 3.5 Grains per Gallon
Exhaust Load End 150 CFMUnload End 400 CFMat 1/4" Static Pressure
Duct Size 3-7/8" x 15-7/8" Outside
Tank Heater 15 kW ElectricPower Rinse 10 kW Electric
Booster Optional Built-In: 21 kW 70°F Rise or 12 kW 40°F RiseShips at 70°F, Field Convertible to 40°F
Pump Motors Prewash 2 HPWash 2 HPPower Rinse 2 HPDrive 1/6 HP
Voltage 208, 240, 480 or 575 Volts
Phase 3
Hertz 60 Hz
Amps 136 Amps at 240V
Amps Note Single Point with 21 kW Booster; Other Ratings Below
21 kW Booster, Single Point 208V 3-Ph: call factory240V 3-Ph: 136 A Rated, 175 A Min. Circuit480V 3-Ph: 68 A Rated, 90 A Min. Circuit575V 3-Ph: 55 A Rated, 70 A Min. Circuit
12 kW Booster, Single Point 208V 3-Ph: 132 A Rated, 175 A Min. Circuit240V 3-Ph: 114 A Rated, 150 A Min. Circuit480V 3-Ph: 57 A Rated, 80 A Min. Circuit575V 3-Ph: 45 A Rated, 60 A Min. Circuit
No Booster 208V 3-Ph: 98 A Rated, 125 A Min. Circuit240V 3-Ph: 85 A Rated, 110 A Min. Circuit480V 3-Ph: 42 A Rated, 60 A Min. Circuit575V 3-Ph: 33 A Rated, 45 A Min. Circuit
21 kW Booster Only, Two Point 208V 3-Ph: 59 A Rated, 80 A Min. Circuit240V 3-Ph: 51 A Rated, 70 A Min. Circuit480V 3-Ph: 26 A Rated, 35 A Min. Circuit575V 3-Ph: 22 A Rated, 30 A Min. Circuit
Connection Ships Single Point; Field Convertible to Two Point
Exterior Stainless Steel, Heavy Gauge, Including Base, Legs and FeetFront and Side Enclosure Panels
Controls Advanced Touchscreen DisplayOn-Board DiagnosticsAutomated DelimeVent Fan Control
Champion Options Two-Point Electrical Connection33" Electric Blower DryerBuilt-In Booster 40°F or 70°F RiseDirect Link and Direct Link Plus+ Connectivity
Champion Accessories Chemical Pump Kit, Detergent and Rinse AidDrain Water Tempering KitTable Limit SwitchVent CowlWater Hammer KitWater PRVKinetico Water Softener
Racks and Tables Peg, Flat and Sheet Pan RacksPRO-90B Corner Loader and UnloaderRCT 64 or RCT 84 Roller TablesCantilever SideloaderSplash Shields
Certifications cULus, NSF, ENERGY STAR
Warranty 1 Year Parts and Labor

Certifications

cULus
NSF
ENERGY STAR
Call

Description

A two-tank high temperature conveyor that washes up to 348 racks an hour on 0.28 gallons per rack.

Champion 86 PRO 2-tank rack conveyor dishwasher, front angle view

The Champion 86 PRO is a high temperature rack conveyor dishwasher with a 64" two-tank section (wash and power rinse) and a 22" prewash. Champion rates it at 348 racks per hour (NSF) at a conveyor speed of 9.6 ft/min, using 0.28 gallons per rack and 100 gallons per hour at most. It can run with an optional built-in 12 kW (40°F rise) or 21 kW (70°F rise) booster, or from a 180°F hot water supply without one. This page lists the electric tank heat version.

Will it fit · Will it hook up

Outside size
102" long (shipping length) x 26-11/16" deep x 65-1/4" high to the top of the vent stacks; machine body 58-1/4" high
Clearances
27" in front for the access doors; 20" clear rack opening; 34" load height; 12" piping clearance above
Power
3-phase only, 208, 240, 480 or 575V, 60 Hz. With the 21 kW booster on one connection: 136 A at 240V, 68 A at 480V, 55 A at 575V (208V: call the factory)
Hot water
3/4" NPT, 110°F minimum at 25 PSI flowing with the built-in booster; 180°F at 20 PSI flowing without a booster. Initial fill 43 gal.
Drain
1-1/4" NPT; maximum drain flow 15 gal/min
Venting
Load end 150 CFM, unload end 400 CFM at 1/4" static pressure; fabricated duct 3-7/8" x 15-7/8" outside

Plan the run: the machine ships 102" long and weighs 1,200 lb. crated. Leave room for the load and unload tables.

348 racks per hour

NSF rated capacity at 9.6 ft/min. Pot and pan mode slows the conveyor to 4.6 ft/min, one rack at a time, with programmable machine dwell in the wash zone.

0.28 gallons per rack

Energy Sentinel shuts the pumps off when no racks are in the machine; maximum use is 100 gallons per hour.

Booster choices

Order it with no booster on a 180°F supply, or with a built-in booster: it ships set for a 70°F rise (21 kW) and can be field converted to a 40°F rise (12 kW).

Two-tank wash

A 17 gal wash tank and a 17 gal power rinse tank, each with its own 2 HP pump, plus a 9 gal prewash tank with a 2 HP pump.

Touchscreen controls

Advanced touchscreen with condition alerts, multi-lingual cleaning and operation guidance, on-board diagnostics and an automated delime function.

Built for cleaning

Single-piece hood, single-piece scrap screen, single-piece stainless upper and lower wash arm manifolds, automatic drain valve and insulated doors that open 180°.

Delivery and setup

  • Free shipping on this item. See our shipping policy for delivery details.
  • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
  • The machine ships crated at 1,200 lb. Plan for a liftgate or loading dock and enough people or equipment to move it into place.
  • Champion requires plumbing and electrical connections by qualified personnel who follow local plumbing, sanitary and safety codes and the National Electrical Code.
  • A water hammer arrestor (ASSE-1010 or equal) must be supplied by others in the common water supply line. Champion advises against tankless water heaters and PEX lines, which may void the warranty.
  • Factory authorized start-up is a standard feature.

Questions buyers ask

Is this a high temp machine, and do I need a booster?

Yes, it is high temperature. With 110°F supply water you need the built-in booster (21 kW for a 70°F rise, field convertible to 12 kW for 40°F). With a 180°F supply you can order it without a booster.

What electrical service does it need?

Three-phase power at 208, 240, 480 or 575V. With the 21 kW booster on a single connection it draws 136 A at 240V, 68 A at 480V and 55 A at 575V; at 208V Champion asks you to call the factory. It ships as a single-point connection and a qualified electrician can convert it to two-point.

Do I need a hood or vent?

Yes. Champion specifies vent connections of 150 CFM at the load end and 400 CFM at the unload end at 1/4" static pressure, with a fabricated duct of 3-7/8" x 15-7/8".

Is it ENERGY STAR certified?

Yes. Champion's spec sheet for the 86 PRO shows ENERGY STAR certified, along with cULus and NSF.

How hard can my water be?

Champion lists water hardness of less than 3.5 grains per gallon. A Kinetico water softening system is an accessory.

Which direction does it run?

Champion builds it left to right or right to left. Tell us the direction your dish room needs before you order.

What warranty does it have?

Champion lists a 1 year parts and labor warranty.

Do you match lower prices?

Yes. Champion equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.

348 Racks/HrNSF rated, 9.6 ft/min conveyor.
0.28 Gal/RackEnergy Sentinel idle pump shut-off.
Booster Option12 kW or 21 kW built-in booster.
ENERGY STARCertified per Champion spec sheet.

Specs

Manufacturer Champion
Model Number 86 PRO
Series PRO Series Rack Conveyor
Machine Type 2-Tank High Temperature Rack Conveyor
Tank Heat Electric
Direction of Operation Left to right or right to left
Shipping Weight 1,200 lb.
Width 102 Inches
Width Note Shipping Length; 90" Between Table Flanges
Depth 26-11/16 Inches
Height 65-1/4 Inches
Height Note To Top of Vent Stacks; Machine Body 58-1/4"
Load Height 34 Inches
Vertical Clearance 20" Clear, Accepts 18" x 26" Sheet Pans
Door Clearance 27" in Front
Capacity 348 Racks per Hour
Conveyor Speed 9.6 ft/minPot/Pan Mode 4.6 ft/min
Tank Capacity Wash 17 galPower Rinse 17 galPrewash 9 gal
Initial Fill 43 gal
Rack Complement 1 Peg Rack and 1 Flat Rack, 20" x 20"
Water Consumption 0.28 gal per Rack100 gal per Hour Max.
Hot Water Connection 3/4" NPT; 110°F Min. at 25 PSI Flowing with Booster; 180°F at 20 PSI Flowing without Booster
Drain 1-1/4" NPT; 15 gal/min Max. Flow
Water Hardness Less than 3.5 Grains per Gallon
Exhaust Load End 150 CFMUnload End 400 CFMat 1/4" Static Pressure
Duct Size 3-7/8" x 15-7/8" Outside
Tank Heater 15 kW ElectricPower Rinse 10 kW Electric
Booster Optional Built-In: 21 kW 70°F Rise or 12 kW 40°F RiseShips at 70°F, Field Convertible to 40°F
Pump Motors Prewash 2 HPWash 2 HPPower Rinse 2 HPDrive 1/6 HP
Voltage 208, 240, 480 or 575 Volts
Phase 3
Hertz 60 Hz
Amps 136 Amps at 240V
Amps Note Single Point with 21 kW Booster; Other Ratings Below
21 kW Booster, Single Point 208V 3-Ph: call factory240V 3-Ph: 136 A Rated, 175 A Min. Circuit480V 3-Ph: 68 A Rated, 90 A Min. Circuit575V 3-Ph: 55 A Rated, 70 A Min. Circuit
12 kW Booster, Single Point 208V 3-Ph: 132 A Rated, 175 A Min. Circuit240V 3-Ph: 114 A Rated, 150 A Min. Circuit480V 3-Ph: 57 A Rated, 80 A Min. Circuit575V 3-Ph: 45 A Rated, 60 A Min. Circuit
No Booster 208V 3-Ph: 98 A Rated, 125 A Min. Circuit240V 3-Ph: 85 A Rated, 110 A Min. Circuit480V 3-Ph: 42 A Rated, 60 A Min. Circuit575V 3-Ph: 33 A Rated, 45 A Min. Circuit
21 kW Booster Only, Two Point 208V 3-Ph: 59 A Rated, 80 A Min. Circuit240V 3-Ph: 51 A Rated, 70 A Min. Circuit480V 3-Ph: 26 A Rated, 35 A Min. Circuit575V 3-Ph: 22 A Rated, 30 A Min. Circuit
Connection Ships Single Point; Field Convertible to Two Point
Exterior Stainless Steel, Heavy Gauge, Including Base, Legs and FeetFront and Side Enclosure Panels
Controls Advanced Touchscreen DisplayOn-Board DiagnosticsAutomated DelimeVent Fan Control
Champion Options Two-Point Electrical Connection33" Electric Blower DryerBuilt-In Booster 40°F or 70°F RiseDirect Link and Direct Link Plus+ Connectivity
Champion Accessories Chemical Pump Kit, Detergent and Rinse AidDrain Water Tempering KitTable Limit SwitchVent CowlWater Hammer KitWater PRVKinetico Water Softener
Racks and Tables Peg, Flat and Sheet Pan RacksPRO-90B Corner Loader and UnloaderRCT 64 or RCT 84 Roller TablesCantilever SideloaderSplash Shields
Certifications cULus, NSF, ENERGY STAR
Warranty 1 Year Parts and Labor

Certifications

cULus
NSF
ENERGY STAR

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed