Summit SBC58BLIFFLTWADA 24" Floating Tap Built-In Beer Kegerator, 2 Taps, Panel-Ready Door, Black Cabinet, 5.8 Cu. Ft., 115V
Description
A 32-inch-high undercounter kegerator with a floating twin-tap tower that sits on the counter, so you never drill the countertop.
The Summit SBC58BLIFFLTWADA is part of Summit's Floating Tap line: the beer lines leave the top of the kegerator and loop up to a stand-alone twin-tap tower that attaches to the counter with included non-permanent adhesive strips. It needs 2-1/4" between the top of the unit and the underside of the counter for the tubing. The 24" wide, 32" high cabinet (31.88" body) has an integrated stainless door frame that takes your own overlay panel, 23-5/16" W x 28-1/4" H, at least 3/4" thick and up to 10 lb.; panel and handle are not included. Remove the tower, plug the tap hole with the included cover and add the glass shelves and bottle rack to use it as a refrigerator. It is ETL-S listed to NSF standards for commercial use and approved for residential use.
Will it fit · Will it hook up
- Outside size
- 23.63" W x 22.38" D x 31.88" H; 32" to the hinge cap
- Door clearance
- 44.5" deep with the door open 90°; 24.3" deep including the handle
- Counter gap
- Leave 2-1/4" between the top of the kegerator and the underside of the counter for the beer tubing
- Installation
- Built in under a counter or freestanding; no hole in the countertop
- Power
- 115V AC, 60 Hz, 0.8 A
- Door panel
- 23-5/16" W x 28-1/4" H, at least 3/4" thick, up to 10 lb.; panel and handle not included
- Inside
- 21" W x 17.75" D x 27" H
Measure from floor to the underside of the counter: you need the 32" unit height plus 2-1/4" for the tubing.
Floating tap tower
The twin-tap tower is separate from the cabinet and sticks to the counter with non-permanent adhesive strips. No tools are needed to set it up or remove it.
No countertop drilling
The beer tubing leaves the top of the kegerator and loops to the tower, so the counter stays intact. Leave 2-1/4" above the unit for the tubing.
Converts to a refrigerator
A tap hole cover, adjustable glass shelves and a scalloped steel bottle rack come with it, 4 shelves in all.
Complete beer tap kit
A 5 lb. CO2 tank and regulator, dual tap draft arm, Sankey American tap and connection hardware. The CO2 tank ships empty and fits a bracket inside.
Panel-ready door
The stainless door frame takes a full overlay panel, 23-5/16" W x 28-1/4" H, at least 3/4" thick and up to 10 lb.
Simple mechanical controls
A dial thermostat sets 36 to 46°F. Automatic defrost, a cold-wall hidden evaporator and a stainless floor cover keep upkeep low.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Summit lists a unit weight of 180 lb. Plan two people to move it into place.
- The gas tank ships empty. Have it filled by a local gas supplier before the first pour.
- The door panel is not included. Have your cabinet maker build it to Summit's panel size before installation.
- Plug it into a 115V, 60 Hz outlet.
Questions buyers ask
Do I have to drill my countertop?
No. The tower is separate from the kegerator and attaches to the counter with non-permanent adhesive strips. The tubing loops from the top of the unit to the tower, so leave 2-1/4" between the unit and the underside of the counter.
What kegs does it hold?
Two 1/6 barrel (sixtel) kegs.
What comes in the tap kit?
Sankey American dual tap kit: twin-tap draft arm, regulator, 5 lb. CO2 tank and connection hardware. The tank ships empty.
Is it approved for commercial use?
Yes. Summit lists it as ETL-S listed to NSF standards commercial standards, with ETL and ETL-C electrical safety listings. Summit also approves it for residential use.
What power does it need?
115V AC, 60 Hz. Summit lists 0.8 amps and 239 kWh per year.
What warranty comes with it?
Summit lists a 1 year parts and labor warranty and a 5 year compressor warranty.
What factory options are there?
Summit offers these as factory options, ordered with the unit: L-TopLock: keyed lock on top of the unit; LHD: left-hand door swing; Latch: factory latch that needs a manual release, adds 1-1/2" of width; CAS3: 3" NSF listed casters, non-marring gray rubber.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | SBC58BLIFFLTWADA |
| Type | 24" Wide Built-In Floating Tap Beer Kegerator |
| Door | Panel-Ready |
| Cabinet | Black |
| Unit Weight | 180 lb. |
| Width | 23.63 Inches |
| Depth | 22.38 Inches |
| Height | 31.88 Inches |
| Height to Hinge Cap | 32 Inches |
| Depth with Handle | 24.3 Inches |
| Depth with Door Open 90° | 44.5 Inches |
| Interior Size | 21" W x 17.75" D x 27" H |
| Compressor Step | 21" W x 5.5" D x 6.5" H |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 0.8 Amps |
| Energy Use | 239 kWh per Year |
| Capacity | 5.8 Cu. Ft. |
| Keg Capacity | Two 1/6 barrel (sixtel) kegs |
| Number of Taps | 2 |
| Tap Kit | Sankey American dual tap kit: twin-tap draft arm, regulator, 5 lb. CO2 tank and connection hardware |
| Tower | Floating, Stand-Alone Tower on CounterNon-Permanent Adhesive Strips2-1/4" Gap Needed Above Unit |
| Temperature Range | 36 to 46°F |
| Thermostat | Dial |
| Defrost | Automatic |
| Refrigerant | R600a, 0.64 oz. |
| Shelves | 4, Glass and Scalloped |
| Door Swing | Right Hand; Left Hand as Factory Option |
| Certifications | ETL, ETL-C, ETL-S |
| Sanitation Standard | ETL-S listed to NSF standards |
| Environmental | CARB compliant hydrocarbon refrigerant, 100% CFC free |
| Warranty | 1 Year Parts and Labor, 5 Years Compressor |
| Factory Options | L-TopLock: keyed lock on top of the unitLHD: left-hand door swingLatch: factory latch that needs a manual release, adds 1-1/2" of widthCAS3: 3" NSF listed casters, non-marring gray rubber |
| UPC | 761101145587 |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

