Master-Bilt QSB74610-C 6' x 10' Indoor Walk-In Cooler Without Floor, 7'4" H, Capsule Pak ECO 3/4 HP R290, 115V
Description
A 6' x 10' cooler for indoor installation, with a one-piece R290 refrigeration system that mounts on the roof and plugs in.
The Master-Bilt QSB74610-C is a QS Series indoor walk-in cooler with a 6' x 10' footprint, 7'4" high without a floor, and 344 cu. ft. of storage. It is matched with the Capsule Pak ECO CPB075PC-S-0, a 3/4 HP self-contained ceiling-mount system rated 6,700 BTUH that runs on 115/60/1 power with a NEMA 5-20P plug. Walls and ceiling are 4" foamed-in-place panels clad in 26 gauge stucco embossed coated steel, and the +37°F design temperature is held by a LogiTemp electronic controller. Floorless wall panels sit on NSF listed vinyl floor sealers on your existing floor.
Will it fit · Will it hook up
- Footprint
- 6' x 10' (72" x 120"); Master-Bilt lists QS sizes as actual
- Box height
- 7'4" (87-5/8") less floor, listed by Master-Bilt as 7'3-5/8"; the Capsule Pak ECO housing on the roof is 14.92" high
- Clearance
- At least 4" above and 24" on each side of the refrigeration system for installation, service and condenser air
- Door
- 26" W x 78" H opening, right or left hinge; 30" and 36" widths are Master-Bilt options
- Refrigeration power
- 115/60/1, 11.4 A, 9 ft. cord with NEMA 5-20P plug on its own grounded circuit; no extension cord
- Door section power
- 120/60/1, 0.88 A, field wired to a junction box above the door light
- Floor
- No floor: wall panels sit on NSF listed vinyl sealers, so the building floor must be firm, smooth and level
- Room air
- Indoor system: ambient at or below 90°F and 55% RH, about 200 CFM of fresh air; operating range 45°F to 100°F
Plan for the box height plus the 14.92" refrigeration housing and 4" clearance above it when you check ceiling or overhead space.
4" foamed panels
Panels are 4" thick, metal clad and foamed in place with HFC-free HFO polyurethane. Minimum R-value is 25 for walls, ceiling and door.
One-piece Capsule Pak ECO
The CPB075PC-S-0 puts the condensing unit and evaporator coil in one pre-charged housing that drops into a factory-cut ceiling opening. A flush coil keeps the components out of the storage space.
Natural R290 refrigerant
The system uses 9.5 oz. of R290 (two compressors at 4.75 oz each) and is DOE, CARB and SNAP compliant, with an AWEF of 5.61.
LogiTemp controller
Digital readout, four-button setup and electronic automatic defrost on coolers and freezers. Error codes and settings are available online with the optional connection kit.
Secure, sealed door
Self-closing flush door with stepped profile, two cam-lift hinges, spring closer, magnetic gasket, heated threshold, perimeter heater wire and a deadbolt handle with key/padlock feature and inside safety release.
No plumbing needed
Indoor Capsule Pak ECO systems evaporate condensate with wicking pads and forced air from the condenser fan, so no drain line is run.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Inspect the shipment before you sign: count the pallets and crates against the delivery receipt and note any damage on it. Report concealed damage to the carrier right away.
- Each walk-in is color coded and every piece carries the same order number as the delivery receipt. Master-Bilt recommends installing it as soon as it arrives.
- Assembly needs a firm, perfectly level base; the wall panels follow any unevenness. Master-Bilt says only qualified service technicians should install and service the refrigeration system.
- Have a dedicated grounded 115V circuit with a NEMA 5-20 receptacle within reach of the 9 ft. cord, plus a 120V feed for the door section. Do not use an extension cord: Master-Bilt says it voids all warranties.
Questions buyers ask
How much space does the QSB74610-C need?
The box is 6' x 10' (72" x 120") and 7'4" high without a floor. The roof-mounted Capsule Pak ECO housing adds 14.92", and Master-Bilt asks for 4" above it and 24" on each side.
What power does it need?
The CPB075PC-S-0 runs on 115/60/1 at 11.4 A and has a 9 ft. cord with a NEMA 5-20P plug, so it needs its own grounded receptacle. The door section takes a separate 120/60/1 feed at 0.88 A, wired to a junction box.
What temperature does it hold?
It is designed for +37°F. The cooler control comes set at 35°F, and the set point can be adjusted from 32°F to 55°F.
Does it include a floor?
No. This 74 Series model is floorless. The wall panels sit on NSF listed vinyl floor sealers on your existing level floor.
What warranty does Master-Bilt give?
Master-Bilt lists a 15-year panel warranty and 18 months parts and labor. A 5-year compressor warranty is available as an option. Warranty repairs must be done by an RSG authorized service provider.
What options are available?
Options include 30" or 36" doors, U-shaped shelving kits in Green Kote or Chrome Kote, an exterior ramp, floor tread kickplate kit, strip curtains, a leak detector/alarm and the 5-year compressor warranty. Indoor models can add an electric vaporizer. They are not included in this listing.
Do you match lower prices?
Yes. Master-Bilt equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Master-Bilt |
|---|---|
| Model Number | QSB74610-C |
| Series | QS Series Walk-In |
| QS Sheet Model | QS74610 |
| Type | Indoor Walk-In Cooler, Self-Contained Ceiling Mount Refrigeration |
| Usage | Indoor |
| Width | 72 Inches |
| Depth | 120 Inches |
| Height | 87-5/8 Inches |
| Nominal Size | 6' x 10' x 7'4"Sizes Listed as Actual74 Series Height 7'3-5/8" |
| Refrigeration Housing | 14.92" High48.25" Long4" Clearance Above, 24" Each Side |
| Capacity | 344 cu. ft. |
| Refrigeration System | Capsule Pak ECO CPB075PC-S-0Self-Contained, Ceiling Mount, Air Cooled |
| Horsepower | 3/4 HP |
| Capacity BTUH | 6,700 BTUH16-Hour Design Runtime, 90°F Ambient |
| Refrigerant | R2909.5 oz. Charge |
| AWEF | 5.61 |
| Temperature Range | 32°F to 55°F Set Point |
| Design Temperature | +37°F |
| Defrost | Electronic Automatic Defrost |
| Condensate | Hot Gas or Wick Condensate Vaporizer, No Plumbing |
| System Ship Weight | 214 lb. |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 11.4 Amps |
| Plug Type | NEMA 5-20P |
| Cord | 9 ft. Attached to Condensing Unit |
| Door Section Electrical | 120/60/10.88 A106.07 WField Wired to Junction Box |
| Door Opening | 26" W x 78" H30" or 36" Optional |
| Door Features | Self-Closing, Flush, InfittingRight or Left HingeCam-Lift HingesSpring CloserDeadbolt Handle with Inside Safety ReleaseMagnetic GasketHeated ThresholdPerimeter Heater Wire |
| Door Energy Use | 2.49 kWh/day |
| Lighting and Controls | Vapor-Proof LED Light Above DoorDigital ThermometerLight Switch with Exterior Pilot Light |
| Panels | 4" Foamed-In-Place HFO Polyurethane, HFC FreeCam-Lock FastenersFoamed-In Gaskets |
| Exterior | 26 Gauge Stucco Embossed Coated Steel |
| Interior | 26 Gauge Stucco Embossed Coated Steel |
| Floor | FloorlessNSF Listed Vinyl Floor Sealers Included |
| R-Value | Walls and Ceiling R-25Door R-25 |
| Control Type | LogiTemp Electronic ControllerDigital Readout |
| Certifications | UL and C-UL Listed System, UL NCKL, NSF, USDA Accepted, DOE Compliant |
| Other Listings | City of Houston, California State, Oregon State, CN UL Flame SpreadCARB and SNAP Compliant System |
| Warranty | 15-Year Panel, 18-Month Parts and Labor |
| Optional Warranty | 5-Year Compressor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

