Wells BMW-206RTD/AFU Bottom-Mount Drop-In Food Warmer, 12" x 20" Single Well, Round Corners, Insulated, Thermostatic, Autofill, 1/2" Drain, 208/240V
Description
A fully insulated, bottom-mount hot food well for one 12" x 20" pan, built into a metal counter on a serving line or buffet.
The Wells BMW-206RTD/AFU is a heavy-duty, round-corner rectangular drop-in food warmer that mounts from below the counter and holds one 12" x 20" pan or equivalent fractional pans. The deep-drawn stainless steel warming pan is insulated on all four sides and the bottom for quicker preheat, faster recovery and lower energy use. A thermostatic control in a recessed, front-mounted panel sets the heat, a high limit prevents overheating and a temperature-ready light shows when it is ready. Autofill keeps the water level up automatically, so the unit needs a cold water connection and runs wet only.
Will it fit · Will it hook up
- Outside size
- 13-7/8" W x 21-15/16" front to back x 8-5/16" H
- Control panel
- 14" W x 6-1/4" H, mounted in the counter front
- Clearances
- Back 2", sides 2", bottom 6-3/4", front 4-1/8"
- Power
- 208/240V, 1-phase, 1240/1650 W, 6/6.9 A; field wired
- Counter
- Bottom-mount: the counter cutout must be flanged to hold the warmer; see the Wells installation instructions
- Water and drain
- Cold water supply for the autofill; 1/2" drain
Plan the counter cutout and control panel location with your fabricator before ordering; the warmer installs from below.
Fully insulated
Insulation on all four sides and the bottom gives quicker preheat, faster recovery and energy savings.
Thermostatic control
The thermostat sits recessed in a one-piece drawn, front-mounted panel, with a temperature-ready light. A high limit prevents overheating.
Heavy-duty pan
Deep-drawn, heavy-gauge stainless steel warming pan with round corners for easy cleaning.
Tubular elements
Tubular heating elements under the pan heat quickly and spread heat evenly.
Autofill
A water level probe in the pan feeds water automatically whenever the thermostat is on. Do not run it dry.
Delivery and setup
- It ships at about 24 lb. Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Install it in an all-metal counter from below, sealing the shoulder with silicone and securing it with stainless steel screws, per the Wells installation instructions.
- A licensed electrician wires the supply to the control. Check the nameplate for the voltage.
- A plumber connects a cold water line for the autofill; some areas require a back-flow preventer. Connect the drain per local plumbing code.
Questions buyers ask
What pans does it hold?
One 12" x 20" standard inset pan or equivalent fractional pans. Adapter tops for round insets are offered as options.
What power does it need?
208/240V, single phase, 1240/1650 watts, 6/6.9 amps, wired to the control by an electrician.
Can I run it dry?
No. Autofill warmers must not be used dry; it needs a cold water supply.
What does bottom mount mean?
The warmer fastens under the counter to a turned-down flange in the cutout, so the counter top forms the rim. It must go in an all-metal counter.
What warranty does it have?
The Wells spec sheet and 2023 warranty statement list 1 year limited parts and 1 year limited labor.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | BMW-206RTD/AFU |
| Type | Bottom-Mount Built-In Rectangular Food Warmer, Round Corner, Single Well |
| Shipping Weight | 24 lb. |
| Width | 13-7/8 Inches |
| Depth | 21-15/16 Inches |
| Height | 8-5/16 Inches |
| Control Panel | 14" W x 6-1/4" H |
| Minimum Clearance | Back 2"Sides 2"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 1 Full-Size 12 x 20 Inch Pan |
| Voltage | 208/240 Volts |
| Phase | 1 |
| Watts | 1240/1650 W |
| Amps | 6/6.9 Amps |
| Control Type | Thermostatic, Recessed Front-Mounted PanelHigh LimitTemperature-Ready Light |
| Operation | Autofill, Wet Only |
| Drain | 1/2" NPT |
| Water Supply | Cold Water Line for Autofill |
| Pan | Deep-Drawn Heavy-Gauge Stainless Steel, Round Corners |
| Insulation | Fully Insulated, 4 Sides and Bottom |
| Options | Optional 72" Wiring8 oz. Soup LadleDrain ScreensDrain Valve Extension Kit 20385 for D ModelsAdapter Tops and Insets 2-1/2 to 11 qt. |
| Certifications | NSF, UL Listed |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

