Traulsen CLUC-72R-SD-WTRRR 72-3/16" 3-Section Solid Door Worktop Refrigerator, 18.8 cu. ft., 115V
A 72" C Series worktop refrigerator with a 4" stainless steel backsplash that holds 32°F to 41°F where the line needs it.
The Traulsen CLUC-72R-SD-WTRRR is a 3-section C Series worktop refrigerator for restaurants, bars and commissaries that need cold product close at hand. It holds 32°F to 41°F with a rear-mounted R-290 system and gives you 3 solid doors hinged right/right/right, and 2 adjustable epoxy-coated wire shelves per section. The worktop adds a stainless steel work surface with a 4" backsplash. It runs on 115V and plugs into a standard NEMA 5-15P outlet with the 9 ft. cord provided.
Measure doorways and turns on the way in; the smallest outside dimension is the 31-1/2" depth.
A balanced, self-contained system with capillary tube metering holds 32°F to 41°F for food-safe storage. The water-resistant LED display shows the microprocessor control.
The front-breathing, rear-mounted system lets the unit sit tight to walls and under counters, and the condenser coil is easy to reach for cleaning.
The system uses natural, minimal-GWP R-290 refrigerant, 3.0 oz. charge.
Foamed-in-place recessed handles keep the front flush. Doors close on their own, stay open for loading, and are field-reversible.
Stainless steel exterior and interior with about 2-3/8" of high-density foamed-in-place polyurethane insulation; back and bottom are heavy-gauge galvanized steel. The worktop has a 4" stainless backsplash.
A 115V outlet for the NEMA 5-15P plug. Traulsen lists 2.6 A at 115/60/1, and a 9 ft. cord and plug come with the unit.
Traulsen rates the system to operate at 32°F to 41°F.
No side or rear gap is needed. The front-breathing system allows zero-clearance installation.
This model ships hinged right/right/right. Traulsen lists the doors as field-reversible, and other hinging is sold as separate model numbers.
Traulsen provides a six-year parts and labor warranty and a seven-year compressor parts warranty.
Field-installed options on Traulsen's sheet: Additional epoxy-coated shelves; Set of 6 6" legs; Set of 6 6" casters; Set of 6 2-3/4" casters.
Not on this one. Traulsen's overshelf kit is for compact units but excludes worktop undercounters; this model has a 4" backsplash instead.
Yes. Traulsen equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Traulsen |
|---|---|
| Model Number | CLUC-72R-SD-WTRRR |
| Series | C Series Compact Undercounter |
| Type | 3-Section Worktop Refrigerator |
| Width | 72-3/16 Inches |
| Depth | 31-1/2 Inches |
| Height | 38 Inches |
| Height Note | Includes 4" CastersIncludes 4" Backsplash |
| Capacity | 18.8 cu. ft. |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 2.6 Amps |
| Plug Type | NEMA 5-15P |
| Cord Length | 9 ft. |
| Horsepower | 1/5 HP |
| Temperature Range | 32 - 41 Degrees F |
| Refrigerant | R-290 |
| Refrigerant Charge | 3.0 oz. |
| BTU | 1800 BTU, at 90°F Ambient and 20°F Evaporator |
| System | Self-Contained, Rear-MountedFront-Breathing, Zero-Clearance InstallationCapillary Tube Metering |
| Control | Microprocessor Control with Water-Resistant LED Display |
| Doors | 3 Solid DoorsHinged Right/Right/RightSelf-Closing with Stay-Open FeatureFoamed-In-Place Recessed HandlesSnap-In Magnetic GasketsField-Reversible |
| Shelves | 6 Adjustable Epoxy-Coated Wire Shelves, 2 per Section, on Pilasters |
| Exterior | Stainless Steel4" High Stainless Steel BacksplashHeavy-Gauge Galvanized Steel Back and Bottom |
| Interior | Stainless Steel |
| Insulation | Average 2-3/8" High-Density Non-CFC Foamed-In-Place Polyurethane |
| Casters | 6 Factory-Installed 4" Casters, Some with Brakes |
| Field-Installed Options | Additional epoxy-coated shelvesSet of 6 6" legsSet of 6 6" castersSet of 6 2-3/4" casters |
| Door Locks | Lock-Equipped Version Uses -LK Model Suffix |
| Certifications | ENERGY STAR, cETLus, ETL Sanitation |
| Listing | Listed to Applicable UL, CSA and NSF Standards by an Approved NRTL |
| Warranty | 6-Year Parts and Labor, 7-Year Compressor Parts |
| Made In | Engineered and Hand-Assembled in Fort Worth, Texas |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
