American Eagle AE-G22NM 1.5 HP Stainless Steel Motor Unit with #12 Hub, 115V
A 1.5 HP stainless motor base with a #12 hub that runs American Eagle's grinder, cutter, jerky, tenderizer and vegetable heads.
The American Eagle AE-G22NM is the 1.5 HP motor unit from the AE-G22N meat grinder, sold on its own. It has a 100% gear driven transmission with steel alloy gears, a permanently lubricated sealed design and a stainless steel housing. Its universal #12 hub takes all American Eagle #12 attachments. It runs on 115V 60 Hz single-phase power and ships without a grinder head or accessories.
100% gear driven transmission with heat treated steel alloy gears and a 1.5 HP motor.
Permanently lubricated, sealed motor design with an air cooled motor for low maintenance.
Runs American Eagle #12 heads: meat grinder, meat cutter, jerky slicer, tenderizer and vegetable cutter.
Reverse helps clear a grinder jam. American Eagle says to use reverse only with the grinder head.
High polish stainless steel housing with no sharp corners or seams, on non-slip rubber feet.
No. American Eagle sells the AE-G22NM as a standalone motor unit. It does not include the feeder pan, pusher, stuffing tube, plates or knife that come with the AE-G22N kit.
115V, 60 Hz, single-phase. American Eagle's AE-G22N sheet lists 16 A and 1.5 HP. A built-in circuit breaker with reset protects the motor.
All American Eagle #12 hub attachments: AE-G12NH and AE-G22NH grinder heads, AE-MC12NH and AE-GMC22NH meat cutters, AE-JS12H jerky slicer, AE-TS12H tenderizer and AE-VS12NH vegetable cutter. American Eagle recommends this 1.5 HP unit for the AE-GMC22NH meat cutter and the AE-VS12NH vegetable cutter.
No. American Eagle says reverse is for the meat grinder head only; using it with other attachments may cause damage not covered by the warranty.
American Eagle lists a 1 year limited warranty. It must be registered.
Specs
| Manufacturer | American Eagle |
|---|---|
| Model Number | AE-G22NM |
| Type | Motor Unit with #12 Hub |
| Shipping Weight | 72 lb. |
| Horsepower | 1.5 HP |
| Speed | 170 RPM, AE-G22N sheet |
| Transmission | 100% Gear Driven, Steel Alloy Gears |
| Voltage | 115 Volts |
| Phase | 1 |
| Hertz | 60 Hz |
| Amps | 16 A |
| Controls | Forward/Reverse SwitchBuilt-In Circuit Breaker with Reset |
| Hub | Universal #12 Hub |
| Housing | Stainless Steel, High PolishNon-Slip Rubber Feet |
| Not Included | Grinder Head, Feeder Pan, Pusher, Stuffing Tube, Plates and Knife |
| Certifications | ETL to NSF/ANSI 8, CSA, CE |
| Warranty | 1 Year Limited |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
