APW Wyott BM-80CULS Insulated Bottom-Mount Hot Food Well, 12" x 20", Square Corners, Thermostatic, UL Listed
A bottom-mount drop-in warmer that holds one 12" x 20" pan of hot food at safe serving temperature in a metal counter.
The APW Wyott BM-80CULS is a single-well, heavy-duty, bottom-mount rectangular drop-in food warmer with square corners. It accommodates one 12" x 20" standard food pan or equivalent fractional inset pans and runs wet or dry. A one-piece stainless steel top flange and heavy-gauge deep-drawn stainless warming pan are standard. It is fully insulated around all four sides and the bottom for quicker preheat, faster recovery and energy savings. Thermostatic control with a high limit and temperature-ready light keeps food at temperature. This UL version has complete UL listed construction with electrical conduit, bezel and control box.
APW designs its bottom-mount wells for metal countertops; plan the cutout and control location with your fabricator.
Holds one standard 12" x 20" pan or fractional insets for hot holding on a serving line.
High limits prevent overheating; a temperature-ready light shows when the well is at temperature.
Heavy-gauge, deep-drawn stainless steel warming pan under a one-piece stainless steel top flange.
Powerful tubular heating elements under the warming pan give quick, even heat.
Insulated around all four sides and the bottom for quicker preheat, faster recovery and energy savings.
APW designs its bottom-mount wells for installation in a metal countertop. The top edge has a 13/16" flange, and APW recommends a 3/4" flange turndown. APW's earlier BM sheets give a counter cutout of 11-7/8" W x 19-7/8" D; confirm it against the installation instructions that ship with the unit.
208/240V at 1,240/1,650 W, single phase, wired in by an electrician.
The UL version has complete UL listed construction including electrical conduit, bezel and control box. APW's earlier sheet gives a control cutout of 5-3/4" W x 6-1/4" H and calls for 6" of clearance for the thermostat box.
This model has square corners. APW offers square corners only on BM-80 models, marked with a C in the model number.
Both. APW recommends wet operation for best results.
APW lists an 8 oz. soup ladle, drain screens and a drain valve extension kit with remote handle for D models. APW adaptor tops for 12" x 20" square corner warmers convert the well for round insets.
APW lists a 1-year limited parts and 1-year limited labor warranty for its built-in food warmers, with repairs by an APW authorized service agency.
Specs
| Manufacturer | APW Wyott |
|---|---|
| Model Number | BM-80CULS |
| Type | Insulated Bottom-Mount Drop-In Hot Food Well |
| Shipping Weight | 24 lb. |
| Width | 13.69 Inches |
| Depth | 21.81 Inches |
| Height | 8.32 Inches |
| Control Panel | 5.88" x 6.25" W x H |
| Counter Cutout | 11-7/8" W x 19-7/8" D per APW's Earlier BM Sheets |
| Clearances | Left 2"Right 2"Back 2"Front 4-1/8"Bottom 6-3/4" |
| Pan Capacity | One 12" x 20" Standard Pan or Fractional Insets |
| Corner Style | Square Corners |
| Voltage | 208/240 Volts |
| Phase | 1 |
| 208/240V Rating | 1,240/1,650 W1-Phase |
| Connection | Wired by an Electrician |
| Control Type | Thermostatic |
| Indicators | Temperature-Ready LightHigh-Limit Protection |
| Drain | No |
| Operating Mode | Wet or Dry, Wet Recommended |
| Top Flange | One-Piece Stainless Steel, 13/16" |
| Well Pan | Heavy-Gauge Deep-Drawn Stainless Steel |
| Insulation | Fully Insulated, All Sides and Bottom |
| Mounting | Bottom Mount |
| Accessories Sold Separately | 8 Oz. Soup LadleDrain ScreensDrain Valve Extension Kit for D Models |
| Certifications | UL Listed |
| Warranty | 1 Year Limited Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
