Berkel X13-PLUS 13" Manual Gravity Feed Slicer, 45° Table, Stainless Steel Knife, Gauge Plate Interlock, 1/2 HP, 120V
A 13-inch manual gravity feed slicer with a seam-reduced polymer body that is quick to clean.
The Berkel X13-PLUS is the manual model of the X13-PLUS series. It has a 13" hollow ground stainless steel knife, a 1/2 HP knife motor and a 45° gravity feed table with a full-length articulating rear pusher. The base, product table, pusher, support arm and upper housing are NSF approved engineered polymers that reduce seams, and a mechanical gauge plate interlock keeps the knife covered while the table is off for cleaning.
Plan a solid, level counter with room for the table stroke. A kick stand lifts the front about 6 inches for cleaning underneath.
A variable pitch barrel cam gives ultra-fine adjustment in the first turn of the index knob and opens to 15/16" (34 mm). The knob sits on the upper left, outside the drip zone.
The removable, submersible, table-mounted two-stone dual-action sharpener uses Borazon stones that last longer, sharpen faster and clean easier.
Mechanical interlock with twisted wire aircraft cables: the table must be home and the gauge plate closed to remove the table, and the plate cannot open once it is off.
One-piece NSF polymer base and product table, anodized aluminum gauge plate and center plate, sealed push-button switches out of the food zone.
No-volt release requires a restart after a power interruption, and a permanent ring guard covers the entire non-slicing part of the knife.
A grounded 120V outlet. The slicer is furnished in 120V, 60 Hz, single phase and has an attached 6 ft. 3-wire cord and plug.
Boneless meat, cheese and vegetables. Berkel says it is not for frozen foods, bone-in products or non-food items.
Rectangular product up to 10-1/4" x 6-3/4", square up to 7-1/2" or round up to 8-1/2".
The sharpener, product fence and a brush are packed in the cardboard base with the slicer.
Berkel lists a vegetable chute with pusher, a product fence and a slaw tray.
Berkel covers parts, labor and travel for one year, excluding wear items such as knives, blades and sharpening stones. Repairs go through Hobart Service or a Designated Berkel Service Location.
Specs
| Manufacturer | Berkel |
|---|---|
| Model Number | X13-PLUS |
| Series | X13-PLUS |
| Type | Manual Gravity Feed Slicer |
| Net Weight | 88 lb. |
| Shipping Weight | 118 lb. |
| Width | 28 Inches |
| Depth | 30 Inches |
| Height | 26 Inches |
| Box Size | 31" W x 31" D x 31" H |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Cord | 6 ft. 3-Wire Cord and Plug |
| Motor | 1/2 HP Knife Motor, 1-Speed, Totally Enclosed, Permanently Lubricated Ball Bearings, Thermally Protected |
| Knife Diameter | 13 Inches |
| Knife Material | Hollow Ground, Hardened and Polished Stainless Steel |
| Sharpener | Removable, Submersible, Table-Mounted Two-Stone Dual-Action, Borazon Stones |
| Knife Guard | Permanent Tapered Ring Guard |
| Feed | Full 45° Gravity FeedArticulating Full-Length Rear PusherProduct Fence |
| Slice Thickness | Up to 15/16 Inch |
| Capacity | Rectangle 10-1/4" x 6-3/4"Square 7-1/2"Round 8-1/2" |
| Operation | Manual |
| Body | NSF Approved Engineered Polymer Base, Product Table, Pusher, Support Arm and Upper Housing |
| Gauge and Center Plate | Anodized Aluminum |
| Interlocks | Mechanical Gauge Plate InterlockNo-Volt Release |
| Control Type | Sealed Push-Button Start/Stop on Index Knob HousingLED Power Light |
| Kick Stand | Spring-Loaded Kick Stand for Cleaning Under the Slicer |
| Accessories | Vegetable Chute with PusherProduct FenceSlaw Tray |
| Certifications | ETL, cETLus |
| Sanitation Standard | Complies with NSF/ANSI Standard 8 |
| Warranty | 1 Year Parts, Labor and Travel |
| Warranty Exclusions | Wear Items Excluded |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
