Dispense-Rite STL-2F In-Counter Adjustable Cup Dispenser, 8-44 oz. Cups, 3-1/8"-4-1/2" Rim, 22" ABS Plastic, F Spring Only, Case of 6
Six ABS plastic in-counter dispensers that hand out 8 oz. to 44 oz. cups one at a time and keep the stacks clean and off the counter.
This listing is a case of 6 Dispense-Rite STL-2F dispensers from the STL Series. Each takes 8 oz. to 44 oz. paper, plastic or foam cups with outside rim diameters of 3-1/8" to 4-1/2", mounts in a 5-1/4" round counter hole and has a standard 22" under-counter length. Three adjustment clips slide in or out by hand, so the dispenser is adjusted without tools and without removing it from the counter. Construction is ABS plastic with a no-jam design, NSF listed and made in the USA.
Check that you have 22" of clear space behind or below the counter, and measure your cup rim before you order.
Three adjustment clips slide in or out by hand, so the dispenser is adjusted without tools and without removing it from the counter.
Works with foam cups in any mounting position and paper or plastic cups mounted horizontally.
The integrated mounting collar fully supports the dispenser from the front of the counter, so no rear fabrication is needed.
ABS plastic construction with a no-jam design; NSF listed and made in the USA.
8 oz. to 44 oz. paper, plastic or foam cups with outside rim diameters from 3-1/8" to 4-1/2". Dispense-Rite gives ounce sizes for reference only, so measure the rim before you order.
A 5-1/4" round hole. The 7-1/8" ring bezel covers the edge, and the dispenser needs 22" of under-counter length.
This model has only the F (light) spring. It works with foam cups in any mounting position and with paper or plastic cups mounted horizontally. For paper or plastic cups mounted vertically or at an angle, choose the two-spring model.
Remove the cover ring, open the three clips to the largest setting, insert a full sleeve of cups rim first, then slide all three clips in equally until cups dispense one at a time.
Six. Dispense-Rite sells the STL-2F in a case of 6, and this listing is that case.
Dispense-Rite gives a one-year limited warranty from the date of sale. It covers repair or replacement of defective parts, F.O.B. factory. Labor, freight and damage in transit are not covered.
Specs
| Manufacturer | Dispense-Rite |
|---|---|
| Model Number | STL-2F |
| Series | STL Series |
| Type | In-counter cup dispenser |
| Sold As | Case of 6 dispensers |
| UPC Each | 812483019086 |
| UPC Case of 6 | 812483012483 |
| Overall Size | 7-1/8" Dia. x 23" L |
| Ring Bezel Diameter | 7-1/8 Inches |
| Under-Counter Length | 22 Inches |
| Tube Diameter | 5 Inches |
| Counter Cut-Out | 5-1/4 Inch diameter hole |
| Mounting | In-counter |
| Mounting Positions | Foam cups in any position; paper or plastic cups horizontal only |
| Cup Size | 8 oz. to 44 oz. |
| Cup Rim Diameter | 3-1/8" to 4-1/2" |
| Cup Types | Paper, plastic or foam |
| Dispensing Mechanism | Tool-free three-clip adjustment |
| Springs | Single F light compression spring |
| Material | ABS Plastic |
| Design | No-jam |
| Shipping Weight | 21 lb. |
| Shipping Weight Basis | Per case of 6 |
| Carton Size Each | 8" L x 8" W x 24" H |
| Master Carton Size | 24" L x 18" W x 24" H |
| Certifications | NSF |
| Country of Origin | USA |
| Warranty | 1-Year Limited |
| Warranty Coverage | Dispense-Rite repairs or replaces defective parts F.O.B. factory within 1 year from date of sale; labor and freight are not covered |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
