Duke EP-6-CBSS Thurmaduke Portable 88" Electric Steam Table on Casters, 6 Sealed Wells, Stainless Steel Body, 208/240V
Description
An 88-inch, 6-well electric steam table on casters that rolls hot food to where you serve it.
The Duke EP-6-CBSS is a Thurmaduke Portable electric hot food unit with six 12" x 20" sealed wells, a stainless carving surface on drop brackets, sliding doors and 5" casters, two with locks. A 2-1/2" polyvinyl bumper on a 14 gauge stainless channel frame protects walls and doorways, and a 6 ft. heavy duty cord and plug comes attached. The EP-6-CBSS has a 300 Series stainless steel body.
Will it fit · Will it hook up
- Outside size
- 88" long x 35-1/2" deep x 36" high; 94" long over the bumper
- Wells
- 6 sealed wells, 12" x 20" openings, stainless liners 6-1/2" deep
- Power
- 208 or 240 Volts, single phase, cord and plug attached. 208V: 4,500 W, 21.6 A, NEMA L6-30 | 240V: 4,500 W, 18.8 A, NEMA L6-30
- Drain
- Sealed wells drain through a copper manifold to one brass master valve
- Weight
- 605 lb.; 74.3 cu. ft. crated; freight class 150
Measure doorways and halls against the 35-1/2" depth and the 94" length over the bumper.
Sealed thermostatic wells
Each of the 6 sealed stainless wells has a 750 watt element and a Robertshaw thermostat with an indicator light, so you set each pan of food on its own.
One-piece stainless top
The top is one piece of 16 gauge, 300 Series stainless steel with die-stamped 12" x 20" openings.
Manifold drains
Wells drain through copper manifolds to one brass master valve, so you empty the unit from one point. Individual drain valves are a Duke option.
Master switch
A master toggle switch with indicator light turns the whole unit on and off. Wire knob guards protect the controls.
Built to roll
Rides on 5" casters, two with locks, inside a 2-1/2" heavy duty polyvinyl bumper on a 14 gauge stainless channel frame.
Doors and carving shelf
Sliding doors close the base. A stainless carving surface sits on drop brackets, and the 300 Series stainless steel body has end panels.
Delivery and setup
- Arrives by freight truck. Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- The unit weighs 605 lb. and ships crated at 74.3 cu. ft., freight class 150. Plan enough people or a lift gate to move it.
- It comes with a 6 ft. heavy duty cord and plug. Have a receptacle that matches the NEMA configuration Duke lists for the voltage you order: 208V: 4,500 W, 21.6 A, NEMA L6-30; 240V: 4,500 W, 18.8 A, NEMA L6-30.
- Duke notes that electric values and plug configurations change for three-phase wiring or added electric options; three-phase values come from the factory.
Questions buyers ask
What power does it need?
Order it for 208 or 240 volts. Duke does not offer the 6-well unit at 120V. Single phase, it draws 4,500 watts: 21.6 A at 208V, 18.8 A at 240V. Three-phase wiring is a Duke option.
Does it come with a cord and plug?
Yes. The Portable model has a 6 ft. heavy duty cord and plug attached. Duke lists NEMA L6-30 at 208V and NEMA L6-30 at 240V.
What pans fit the wells?
The openings are die-stamped 12" x 20" with 12" x 20" stainless liners, 6-1/2" deep. Duke offers adaptor plates as an option for other pan setups.
How do the wells drain?
The sealed wells drain through copper manifolds to one brass master valve. Individual drain valves are a Duke option.
What is the difference between EP-6-CBSS and EP-6-CBPG?
The PG model has a paint grip steel body and the SS model a 300 Series stainless steel body. Size, wells, heat and weight are the same.
What warranty and listings does it have?
Duke lists a 1 year parts and labor warranty for Thurmaduke steamtables. The spec sheet shows UL EPH Classified and cULus marks.
Specs
| Manufacturer | Duke |
|---|---|
| Model Number | EP-6-CBSS |
| Series | Thurmaduke Portable |
| Type | Electric Hot Food Unit, Sealed Wells, Portable |
| Body Finish | Stainless Steel |
| Weight | 605 lb. |
| Crated Cube | 74.3 cu. ft. |
| Freight Class | 150 |
| Width | 88 Inches |
| Depth | 35-1/2 Inches |
| Height | 36 Inches |
| Length over Bumper | 94" |
| Capacity | 6 Wells |
| Top Openings | 6Die-Stamped 12" x 20" |
| Well Liners | 12" x 20" Stainless Steel, 6-1/2" DeepSealed with Drains |
| Voltage | 208 or 240 Volts |
| Phase | Single Phase StandardThree Phase Optional |
| Hertz | 60 Hz |
| Total Wattage | 4,500 Watts750 W Element per Well |
| Amps | 21.6 A at 208V18.8 A at 240V |
| NEMA Configuration | 208V L6-30240V L6-30 |
| Cord and Plug | 6 ft. Heavy Duty Cord and Plug Attached |
| Control Type | Robertshaw Thermostat with Indicator Light per WellMaster Toggle Switch with Indicator Light |
| Drains | Copper Manifold to Brass Master Valve |
| Top | One Piece, 16 Gauge 300 Series Stainless SteelStainless Carving Surface on Drop Brackets |
| Body | 300 Series Stainless SteelEnd PanelsSliding Doors |
| Mobility | 5" Diameter Casters, Two with Locks2-1/2" Polyvinyl Bumper on 14 Gauge Stainless Channel Frame |
| Control Panel | Stainless SteelWire Knob Guards |
| Duke Factory Options | 14 Gauge TopAdaptor PlatesVeneered PanelsPowder Coat Paint ColorsFoodshieldsTrayslides |
| Certifications | UL EPH Classified, cULus |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

