Duke EP303 Aerohot 44-3/8" Electric Hot Food Table, 3 Exposed-Element Wells, Portable on Casters, 120/208/240V, Cord and Plug
Description
A 44-3/8-inch, 3-well economical electric hot food table that holds food with dry heat, or wet heat with spillage pans.
The Duke EP303 is an Aerohot electric hot food unit with three die-formed, 8" deep galvanized wells over exposed dome elements, each with an infinite switch. The 20 gauge stainless top has 12" x 20" openings and a 7" wide, 1/2" thick poly carving board. Duke calls for spillage pans when you use wet heat. It is the portable version on casters; the "EP" prefix marks Duke portable units. A 6 ft. cord and NEMA plug come attached.
Will it fit · Will it hook up
- Outside size
- 44-3/8" long x 22-7/16" deep x 34" high
- Wells
- 3 galvanized wells, 12" x 20" openings, 8" deep, exposed elements; spillage pans needed for wet heat
- Power
- Order 120, 208 or 240 volts, single phase; 6 ft. cord and NEMA plug included. 120V: 1,500 W, 12.5 A, NEMA 5-15 | 208V: 2,250 W, 10.8 A, NEMA 6-20 | 240V: 2,250 W, 9.4 A, NEMA 6-20
- Elements
- 500 W per well at 120V, 750 W per well at 208V or 240V
- Weight
- 114 lb.; 32.5 cu. ft. crated; freight class 85
Check that the NEMA receptacle for the voltage you order is within reach of the 6 ft. cord.
Wet or dry heat
Exposed dome elements heat each well directly. Use it dry, or add spillage pans for wet heat as Duke requires.
Insulated galvanized wells
Each die-formed, 8" deep galvanized liner is insulated with 1" fiberglass on all four sides and the bottom.
Infinite switch per well
Each section has its own infinite switch. Elements are 500 W at 120V and 750 W at 208V or 240V.
Carving board included
A 7" wide, 1/2" thick poly carving board rides on an 18 gauge stainless support shelf with die-stamped brackets.
Stainless body and shelf
20 gauge, 430 Series stainless body and undershelf, on casters.
Delivery and setup
- Arrives by freight truck. Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- The unit weighs 114 lb. and ships at 32.5 cu. ft. crated, freight class 85.
- It comes with a 6 ft. cord and NEMA plug. Duke lists these single-phase values: 120V: 1,500 W, 12.5 A, NEMA 5-15; 208V: 2,250 W, 10.8 A, NEMA 6-20; 240V: 2,250 W, 9.4 A, NEMA 6-20.
- Duke notes that electric values and plug configurations change for three-phase wiring or added electric options; three-phase values come from the factory.
- Order spillage pans if you plan to hold food with wet heat; Duke lists them as required for wet heat on exposed-element units.
Questions buyers ask
What power does it need?
Order it for 120, 208 or 240 volts. Single phase, it draws 1,500 W at 120V, 2,250 W at 208V and 2,250 W at 240V: 12.5 A at 120V, 10.8 A at 208V, 9.4 A at 240V. Three-phase wiring is a Duke option.
What plug does it have?
A 6 ft. cord and plug come attached. Duke lists NEMA 5-15 at 120V, NEMA 6-20 at 208V and NEMA 6-20 at 240V.
Can I use water in the wells?
Yes, with spillage pans. Duke lists spillage pans as required for wet heat on exposed-element units. Without them, the unit holds with dry heat.
What pans fit?
The openings are die-stamped 12" x 20". Adapter plates and insets are Duke options.
Why is the wattage lower at 120V?
At 120V Duke uses 500 W elements, so the unit draws 1,500 W. At 208V or 240V it uses 750 W elements for 2,250 W. A 1,000 W element is a Duke option.
Is it stationary or portable?
Portable. The EP models ride on casters; the E models stand on legs.
What warranty and listings does it have?
Duke lists a 1 year parts and labor warranty for Aerohot steamtables. The spec sheet shows cULus and UL EPH Classified marks, NSF/ANSI 4.
Specs
| Manufacturer | Duke |
|---|---|
| Model Number | EP303 |
| Series | Aerohot Foodservice |
| Type | Electric Hot Food Unit, Exposed Element Wells, Portable |
| Weight | 114 lb. |
| Crated Cube | 32.5 cu. ft. |
| Freight Class | 85 |
| Width | 44-3/8 Inches |
| Depth | 22-7/16 Inches |
| Height | 34 Inches |
| Capacity | 3 Wells |
| Top Openings | 3Die-Stamped 12" x 20" |
| Wells | Die-Formed Galvanized Liners, 8" DeepInsulated with 1" Fiberglass on 4 Sides and BottomSpillage Pans Required for Wet Heat |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase StandardThree Phase Optional |
| Hertz | 60 Hz |
| Elements | 500 W per Well at 120V750 W per Well at 208V and 240V |
| Total Wattage | 1,500 W at 120V2,250 W at 208V2,250 W at 240V |
| Amps | 12.5 A at 120V10.8 A at 208V9.4 A at 240V |
| NEMA Configuration | 120V 5-15208V 6-20240V 6-20 |
| Cord and Plug | 6 ft. Cord and NEMA Plug Included |
| Control Type | Infinite Switch per Well |
| Top | 20 Gauge Stainless Steel |
| Carving Board | 7" W x 1/2" Thick Poly18 Gauge Stainless Support ShelfDie-Stamped Brackets |
| Body and Undershelf | 20 Gauge 430 Series Stainless Steel |
| Base | Casters, Portable |
| Duke Factory Options | 3-Phase Wiring1,000 W ElementsStainless Steel LinersDrop Type Cutting Board BracketsStainless Steel FeetAdapter PlatesInsets and Inset CoversSpillage PansDish ShelfTrayslides and WorkshelvesFoodshields |
| Certifications | cULus, UL EPH Classified NSF/ANSI 4 |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

