Duke EP305 Aerohot 72-3/8" Portable Electric Hot Food Table, Five Wells, 120/208/240V
Description
A 5-well electric hot food table on casters that holds pans of food hot wherever you set up the line.
The Duke Aerohot EP305 is the portable version of the E305: a 72-3/8" long stainless steel hot food table with five open wells for 12" x 20" pans. Each well is an 8" deep galvanized liner, insulated on all sides, with its own dome-type element and infinite switch. Use it dry, or add spillage pans for wet heat. It comes with a 6 ft. cord and NEMA plug and is wired for 120, 208 or 240 volts, as ordered.
Will it fit · Will it hook up
- Outside size
- 72-3/8" L x 22-7/16" W x 34" H; 165/172 lb. listed for the E305/EP305
- Power
- 120V: 2,500 W, 20.8 A, NEMA L5-30; 208V: 3,750 W, 18.0 A, NEMA L6-30; 240V: 3,750 W, 15.6 A, NEMA 6-20
- Cord
- 6 ft. cord and NEMA plug included, single phase standard
- Wells
- 5 die-stamped 12" x 20" openings
Pick the voltage you have at the serving spot: the 120V version needs a higher-amp circuit than the 208V or 240V version.
Portable on casters
The EP prefix is Duke's portable unit, built on casters so you can move the 72-3/8" table to where you serve.
5 open wells
5 die-stamped 12" x 20" openings over 8" deep galvanized liners insulated with 1" fiberglass on all four sides and the bottom.
Control per well
Each section has its own infinite switch, so you can run one well hotter than the next. 500 W dome-type element per well at 120V, 750 W at 208V or 240V.
Carving board
A 7" wide, 1/2" thick poly carving board sits on an 18 gauge stainless steel support shelf with die-stamped brackets.
Stainless body
20 gauge stainless steel top, 20 gauge 430 Series stainless steel body and undershelf, and 430 Series stainless steel tubular legs.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- Ships by freight from Duke; Duke lists freight class 85.
- Have the right outlet ready: NEMA L5-30 for 120V, NEMA L6-30 for 208V or NEMA 6-20 for 240V. The cord is 6 ft. long.
- Duke says to contact the factory for three-phase electrical values and plug types; confirm them with us before you order a 3-phase unit.
Questions buyers ask
What outlet does it need?
It depends on the voltage you order. 120V: 2,500 W, 20.8 A, NEMA L5-30. 208V: 3,750 W, 18.0 A, NEMA L6-30. 240V: 3,750 W, 15.6 A, NEMA 6-20. A 6 ft. cord and plug are included.
What pans fit the wells?
The openings are 12" x 20", die-stamped in the stainless top. Adapter plates and insets are Duke options for smaller pans.
Can I use it with water?
The galvanized wells are for dry heat as built. For wet heat, Duke requires spillage pans; the listing offers aluminum or stainless steel spillage pan sets as an option.
Is it on casters?
Yes. The EP models are Duke's portable units on casters. The stationary version on legs is the E305.
Is three-phase available?
Yes, at extra cost. Single phase is standard. Duke says electric values and plug types change for 3-phase, so confirm them with us when you order.
What certifications does it carry?
The Duke spec sheet shows cULus listing and UL Classified NSF/ANSI 4.
What warranty does it have?
Duke lists a 1 year parts and labor warranty for Aerohot steam tables.
Specs
| Manufacturer | Duke |
|---|---|
| Model Number | EP305 |
| Series | Aerohot Foodservice Hot Food Unit, Electric |
| Type | Portable Electric Hot Food Table on Casters |
| Weight | 165/172 lb. listed for E305/EP305 |
| Freight Class | 85 |
| Length | 72-3/8 Inches |
| Width | 22-7/16 Inches |
| Height | 34 Inches |
| Wells | 5 |
| Well Openings | 12" x 20" Die-Stamped |
| Well Construction | Die-Formed Galvanized Liner, 8" Deep1" Fiberglass Insulation, Four Sides and Bottom |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase Standard, Three Phase Optional |
| Ratings by Voltage | 120V: 2,500 W, 20.8 A, NEMA L5-30208V: 3,750 W, 18.0 A, NEMA L6-30240V: 3,750 W, 15.6 A, NEMA 6-20 |
| Heating Elements | 500 W dome-type element per well at 120V, 750 W at 208V or 240V |
| Cord | 6 ft. Cord and NEMA Plug Included |
| Control Type | Infinite Switch per Well |
| Top | 20 Gauge Stainless Steel |
| Body and Undershelf | 20 Gauge 430 Series Stainless Steel |
| Carving Board | 7" W x 1/2" Poly18 Gauge Stainless Support Shelf with Die-Stamped Brackets |
| Mobility | Portable on Casters |
| Duke Options | 3-Phase Wiring1,000 Watt ElementsStainless Heat Compartment LinerSpillage PansAdapter PlatesInsets and Inset CoversDish ShelfTrayslides and WorkshelvesFoodshields |
| Certifications | cULus, UL Classified NSF/ANSI 4 |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

