Duke EP305SW Aerohot 72-3/8" Portable Electric Hot Food Table, Five Sealed Wells, 120/208/240V
Description
A 5-well electric hot food table on casters that holds pans of food hot wherever you set up the line.
The Duke Aerohot EP305SW is the portable version of the E305SW: a 72-3/8" long stainless steel hot food table with five sealed wells. Each well is a 6-1/2" deep stainless steel liner with its own drain valve, so you can run it wet or dry and drain it without lifting a spillage pan. Every well has its own 750 W element and infinite switch. It comes with a 6 ft. cord and NEMA plug and is wired for 120, 208 or 240 volts, as ordered.
Will it fit · Will it hook up
- Outside size
- 72-3/8" L x 22-7/16" W x 34" H; 165/172 lb. listed for the E305SW/EP305SW
- Power
- 120V: 3,750 W, 31.3 A, NEMA 5-50; 208V: 3,750 W, 18.0 A, NEMA L6-30; 240V: 3,750 W, 15.6 A, NEMA 6-20
- Cord
- 6 ft. cord and NEMA plug included, single phase standard
- Wells
- 5 die-stamped 11-7/8" x 19-7/8" openings
- Drains
- Individual well drain and drain valve on each well
Pick the voltage you have at the serving spot: the 120V version needs a higher-amp circuit than the 208V or 240V version.
Portable on casters
The EP prefix is Duke's portable unit, built on casters so you can move the 72-3/8" table to where you serve.
5 sealed wells
5 die-stamped 11-7/8" x 19-7/8" openings with 6-1/2" deep sealed stainless wells. Each well has a drain and valve for wet or dry use.
Control per well
Each section has its own infinite switch, so you can run one well hotter than the next. 750 W element under each well.
Carving board
A 7" wide, 1/2" thick poly carving board sits on an 18 gauge stainless steel support shelf with die-stamped brackets.
Stainless body
20 gauge stainless steel top, 20 gauge 430 Series stainless steel body and undershelf, and 430 Series stainless steel tubular legs.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- Ships by freight from Duke; Duke lists freight class 85.
- Have the right outlet ready: NEMA 5-50 for 120V, NEMA L6-30 for 208V or NEMA 6-20 for 240V. The cord is 6 ft. long.
- Duke says to contact the factory for three-phase electrical values and plug types; confirm them with us before you order a 3-phase unit.
Questions buyers ask
What outlet does it need?
It depends on the voltage you order. 120V: 3,750 W, 31.3 A, NEMA 5-50. 208V: 3,750 W, 18.0 A, NEMA L6-30. 240V: 3,750 W, 15.6 A, NEMA 6-20. A 6 ft. cord and plug are included.
What pans fit the wells?
The openings are 11-7/8" x 19-7/8", die-stamped in the stainless top. Adapter plates and insets are Duke options for smaller pans.
Can I use it with water?
Yes. Duke lists the sealed wells for wet or dry use. Each well has its own drain and drain valve.
Is it on casters?
Yes. The EP models are Duke's portable units on casters. The stationary version on legs is the E305SW.
Is three-phase available?
Yes, at extra cost. Single phase is standard. Duke says electric values and plug types change for 3-phase, so confirm them with us when you order.
What certifications does it carry?
The Duke spec sheet shows cULus listing and UL EPH Classified.
What warranty does it have?
Duke lists a 1 year parts and labor warranty for Aerohot steam tables.
Specs
| Manufacturer | Duke |
|---|---|
| Model Number | EP305SW |
| Series | Aerohot Foodservice Hot Food Unit, Electric, Sealed Wells |
| Type | Portable Electric Hot Food Table on Casters |
| Weight | 165/172 lb. listed for E305SW/EP305SW |
| Freight Class | 85 |
| Length | 72-3/8 Inches |
| Width | 22-7/16 Inches |
| Height | 34 Inches |
| Wells | 5 |
| Well Openings | 11-7/8" x 19-7/8" Die-Stamped |
| Well Construction | Stainless Steel Sealed Well, 6-1/2" DeepIndividual Drain and Drain ValveWet or Dry Use |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase Standard, Three Phase Optional |
| Ratings by Voltage | 120V: 3,750 W, 31.3 A, NEMA 5-50208V: 3,750 W, 18.0 A, NEMA L6-30240V: 3,750 W, 15.6 A, NEMA 6-20 |
| Heating Elements | 750 W element under each well |
| Cord | 6 ft. Cord and NEMA Plug Included |
| Control Type | Infinite Switch per Well |
| Top | 20 Gauge Stainless Steel |
| Body and Undershelf | 20 Gauge 430 Series Stainless Steel |
| Carving Board | 7" W x 1/2" Poly18 Gauge Stainless Support Shelf with Die-Stamped Brackets |
| Mobility | Portable on Casters |
| Duke Options | 3-Phase WiringDrop Type Cutting Board BracketsAdapter PlatesInsets and Inset CoversDish ShelfTrayslides and WorkshelvesFoodshields |
| Certifications | cULus, UL EPH Classified |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


